Cisco Cisco ASA 5580 Adaptive Security Appliance Leaflet

Page of 1214
 
7-41
思科 ASA 系列命令参考,命令
 
 7       show failover  show ipsec stats traffic 命令
  show interface
        0 late collisions, 0 deferred
        0 input reset drops, 0 output reset drops
        input queue (curr/max packets): hardware (0/0)
        output queue (curr/max packets): hardware (0/0)
Interface Management0/0 "", is administratively down, line protocol is down
  Hardware is i82557, BW 100 Mbps, DLY 1000 usec
        Auto-Duplex, Auto-Speed
        Available but not configured via nameif
        MAC address 000b.fcf8.c44d, MTU not set
        IP address unassigned
        0 packets input, 0 bytes, 0 no buffer
        Received 0 broadcasts, 0 runts, 0 giants
        0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort
        0 L2 decode drops
        0 packets output, 0 bytes, 0 underruns
        0 output errors, 0 collisions, 0 interface resets
        0 babbles, 0 late collisions, 0 deferred
        0 lost carrier, 0 no carrier
        input queue (curr/max packets): hardware (128/128) software (0/0)
        output queue (curr/max packets): hardware (0/0) software (0/0)
Interface Redundant1 "", is down, line protocol is down
  Redundancy Information:
        Members unassigned
Interface Redundant5 "redundant", is administratively down, line protocol is down
  Hardware is i82546GB rev03, BW 1000 Mbps, DLY 1000 usec
        Auto-Duplex, Auto-Speed
        MAC address 000b.fcf8.c451, MTU 1500
        IP address 10.2.3.5, subnet mask 255.255.255.0
        0 packets input, 0 bytes, 0 no buffer
        Received 0 broadcasts, 0 runts, 0 giants
        0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort
        0 L2 decode drops
        0 packets output, 0 bytes, 0 underruns
        0 output errors, 0 collisions
        0 late collisions, 0 deferred
        0 input reset drops, 0 output reset drops
        input queue (curr/max packets): hardware (0/0) software (0/0)
        output queue (curr/max packets): hardware (0/0) software (0/0)
  Traffic Statistics for "redundant":
        0 packets input, 0 bytes
        0 packets output, 0 bytes
        0 packets dropped
      1 minute input rate 0 pkts/sec,  0 bytes/sec
      1 minute output rate 0 pkts/sec,  0 bytes/sec
      1 minute drop rate, 0 pkts/sec
      5 minute input rate 0 pkts/sec,  0 bytes/sec
      5 minute output rate 0 pkts/sec,  0 bytes/sec
      5 minute drop rate, 0 pkts/sec
  Redundancy Information:
        Member GigabitEthernet0/3(Active), GigabitEthernet0/2
        Last switchover at 15:15:26 UTC Oct 24 2006
Interface Redundant5.1 "", is down, line protocol is down
        VLAN identifier none
        Available but not configured with VLAN or via nameif