Cisco Cisco 3365 Mobility Services Engine Release Notes
22
Release Notes for Cisco 3300 Series Mobility Services Engine, Release 7.3.101.0
OL-24938-06
Important Notes
Open Caveats
lists the open caveats in Release 7.3.101.0.
Table 3
Open Caveats
ID Number
Caveat Title
CSCub42987
Headline:
Symptom: After synchronization between WLC and MSE, the NMSP connection
remains inactive.
remains inactive.
Condition: The controller is virtual and is not an appliance
Workaround: In order for the vWLC to establish a NMSP connection and hence
communicate with the MSE, the following commands have to be executed on MS
ECLI (list of commands). It should be noted that the connection between the
MSE and WLCs will not be authenticated post the changes in configuration.
communicate with the MSE, the following commands have to be executed on MS
ECLI (list of commands). It should be noted that the connection between the
MSE and WLCs will not be authenticated post the changes in configuration.
List of commands after SSH to MSE:
cmdshell
config unauthenticated-nmsp true
exit
/etc/init.d/msred restart
CSCub25203
Headline: Maximum Memory value on the Server Monitor shows different values
on the MSE 3310.
on the MSE 3310.
Symptom: Getserverinfo that corresponds to “/ect/init.d/msed status” displays
different values for Max memory (byte) on the MSE 3310.
different values for Max memory (byte) on the MSE 3310.
Condition: Unknown
Workaround: Nothing
CSCub19874
Headline: Need options in Prime Infrastructure to configure an external
repository for the MSE backup.
repository for the MSE backup.
Symptom: The MSE backups are now stored locally in the Prime Infrastructure
server under the FTP repository. Need options to configure and run the MSE
backup and save it in an external repository.
server under the FTP repository. Need options to configure and run the MSE
backup and save it in an external repository.
Condition: When the MSE backups are running using the Prime Infrastructure.
Workaround: Nothing, other than to save them locally.
CSCub16813
Headline: Scheduled accuracy tool does not display maps in the Position Test
point page.
point page.
Symptom: Sometimes, the scheduled accuracy tool does not display map in the
Position Test point page.
Position Test point page.
Condition: Map is not seen.
Workaround: Nothing