Cisco Cisco 3365 Mobility Services Engine Release Notes

In some RF environments, where location accuracy is around 60 to 70% or where incorrect client or tag 
floor location map placements occur, you might need to modify the moment RSSI thresholds in the 
Context Aware Service > Advanced > Location Parameters page on the Prime Infrastructure. 

The following RSSI parameters might require modification:

locp-individual-rssi-change-threshold

locp-aggregated-rssi-change-threshold

locp-many-new-rssi-threshold-in-percent

locp-many-missing-rssi-threshold-in-percent

Contact Cisco TAC for assistance in modifying these parameters.

If you are attempting to deploy WSSI module with 3600 APs, then APs should be placed in monitor 
mode with submode wIPS and advanced wIPS engine enabled on the Prime Infrastructure.

Starting Release 7.5, the AeroScout engine module is removed from both the Connected Mobile 
Experiences setup and location code. During installation, if you are upgrading from Release 7.2 and later 
to Release 7.5, then you will be prompted to remove the AeroScout engine. If you agree to remove, the 
it removes the AeroScout engine and by default, the Cisco Tag Engine is started as part of Connected 
Mobile Experiences. If you do not agree to remove the AeroScout engine, then installation will exit.

This section lists the operational notes for a mobility services engine and contains the following topics: