Cisco Cisco 3365 Mobility Services Engine
21
Release Notes for Cisco Mobility Services Engine, Release 7.6.100.0
OL-30651-01
Operational Notes for a Mobility Services Engine
Configuration Changes for Greater Location Accuracy
In some RF environments, where location accuracy is around 60 to 70% or where incorrect client or tag
floor location map placements occur, you might need to modify the moment RSSI thresholds in the
Context Aware Service > Advanced > Location Parameters page on the Prime Infrastructure.
floor location map placements occur, you might need to modify the moment RSSI thresholds in the
Context Aware Service > Advanced > Location Parameters page on the Prime Infrastructure.
The following RSSI parameters might require modification:
•
locp-individual-rssi-change-threshold
•
locp-aggregated-rssi-change-threshold
•
locp-many-new-rssi-threshold-in-percent
•
locp-many-missing-rssi-threshold-in-percent
Caution
Contact Cisco TAC for assistance in modifying these parameters.
WSSI Module with 3600 AP
If you are attempting to deploy WSSI module with 3600 APs, then APs should be placed in monitor
mode with submode wIPS and advanced wIPS engine enabled on the Prime Infrastructure.
mode with submode wIPS and advanced wIPS engine enabled on the Prime Infrastructure.
AeroScout Engine Module Changes
Starting Release 7.5, the AeroScout engine module is removed from both the Connected Mobile
Experiences setup and location code. During installation, if you are upgrading from Release 7.2 and later
to Release 7.5, then you will be prompted to remove the AeroScout engine. If you agree to remove, the
it removes the AeroScout engine and by default, the Cisco Tag Engine is started as part of Connected
Mobile Experiences. If you do not agree to remove the AeroScout engine, then installation will exit.
Experiences setup and location code. During installation, if you are upgrading from Release 7.2 and later
to Release 7.5, then you will be prompted to remove the AeroScout engine. If you agree to remove, the
it removes the AeroScout engine and by default, the Cisco Tag Engine is started as part of Connected
Mobile Experiences. If you do not agree to remove the AeroScout engine, then installation will exit.
Operational Notes for Connected Mobile Experiences
This section lists the operational notes for a mobility services engine and contains the following topics:
•
•
•
•
•
•
•
•