Cisco Cisco Clean Access 3.5
13-10
Cisco Clean Access Server Installation and Administration Guide
OL-7045-01
Chapter 13 Upgrading to a New Software Release
Upgrading via Web Console (from 3.5.3 and Above Only)
Upgrade CAM from CAM Web Console
After you have upgraded each CAS, upgrade your CAM as described below.
Step 1
.
Step 2
Log into the web console of your Clean Access Manager as user admin (default password is
cisco123
),
and go to Administration > CCA Manager > System Upgrade.
Figure 13-3
CAM System Upgrade
Step 3
Click Browse to locate the upgrade file you just downloaded from Cisco Downloads, for example:
cca_upgrade_3.5.x.tar.gz (CAM/CAS release upgrade file)
cca-3.5.x-to-3.5.x.y-upgrade.tar.gz (CAM/CAS patch upgrade file)
cam-3.5.x-to-3.5.x.y-upgrade.tar.gz (CAM-only patch upgrade file)
Step 4
Click the Upload button. This loads the upgrade file to the CAM and displays it in the upgrade file list
with date and time of upload, file name, and notes (if applicable).
with date and time of upload, file name, and notes (if applicable).
Step 5
Click the Apply icon for the upgrade file, and click OK in the confirmation dialog that appears. This
will start the CAM upgrade. After the upgrade is complete, the CAM will automatically reboot.
will start the CAM upgrade. After the upgrade is complete, the CAM will automatically reboot.
Note
•
If upgrading from 3.5(3), click Open to load the upgrade .tar.gz file as the Clean Access Manager
Patch File, then click Apply Patch.
Patch File, then click Apply Patch.