Cisco Cisco Clean Access 3.5
13-9
Cisco Clean Access Server Installation and Administration Guide
OL-7045-01
Chapter 13 Upgrading to a New Software Release
Upgrading via Web Console (from 3.5.3 and Above Only)
Step 6
Click the Apply icon for the upgrade file, and click OK in the confirmation dialog that appears. This
will start the CAS upgrade. After the upgrade is complete, the CAS will automatically reboot.
will start the CAS upgrade. After the upgrade is complete, the CAS will automatically reboot.
Note
•
If upgrading from 3.5(3), click Open to load the upgrade .tar.gz file as the Upload Patch File, then
click Update.
click Update.
•
When upgrading via web console only, the machine automatically reboots after upgrade.
Step 7
Wait 2-5 minutes for the upgrade and reboot to complete.The CAS web console will become unavailable
during the reboot.
during the reboot.
Step 8
Access the CAS web console again and go to Administration > Software Update. The new software
version and date will be listed in the Current Version field.
version and date will be listed in the Current Version field.
Step 9
Repeat steps
to
for each CAS managed by the CAM.
Note
•
Click Notes to see the notes associated with an uploaded upgrade file (such as new features or fixes
for the release).
for the release).
•
Click Delete to remove an upgrade file from the upgrade directory.
•
The List of Upgrade Logs displays how many upgrades have been done, and the list of upgrades
and logs from each. Upgrade Logs are the same as a stdout from a manual upgrade.
and logs from each. Upgrade Logs are the same as a stdout from a manual upgrade.
•
The List of Upgrade Details displays a list of actions performed by the upgrade for the purpose of
customer support troubleshooting. The format of the Upgrade Details log is: state before upgrade,
upgrade process details, state after upgrade. It is normal for the “state before upgrade” to contain
several warning/error messages (e.g. “INCORRECT”). The “state after upgrade” should be free of
any warning or error messages.
customer support troubleshooting. The format of the Upgrade Details log is: state before upgrade,
upgrade process details, state after upgrade. It is normal for the “state before upgrade” to contain
several warning/error messages (e.g. “INCORRECT”). The “state after upgrade” should be free of
any warning or error messages.
•
Click Reboot to reboot the CAS.
•
Click Shutdown to shut down the service on the box without shutting down the box itself
(equivalent to the
(equivalent to the
service perfigo stop
command). To restart the service, use the
service
perfigo restart
or
reboot
command from a command shell.