Cisco Cisco NAC Appliance 4.1.0

When installing the Clean Access Manager from CD-ROM, the 

automatically appears after the software packages install to prompt you for the initial server 
configuration. 

If necessary, you can always manually start the 

 as follows: 

Over a serial connection or working directly on the server machine, log onto the server as user 

 

with default password 

. 

Run the initial configuration script by entering the following command:

You can run the

 command to modify the configuration of the server if it cannot 

be reached through the web admin console. For further details on CLI commands, see 

.

The configuration utility script suggests default values for particular parameters. To configure the 
installation, either accept the default value or provide a new one, as described below.

After the software is installed from the CD and package installation is complete, the welcome script 
for the configuration utility appears:

Welcome to the Cisco Clean Access Manager quick configuration utility.

Note that you need to be root to execute this utility.

The utility will now ask you a series of configuration questions.

Please answer them carefully.

Cisco Clean Access Manager, (C) 2006 Cisco Systems, Inc.

You are first prompted for the IP address of the interface eth0:

Configuring the network interface:

Please enter the IP address for the interface eth0 [10.0.2.15]: 10.201.240.11

You entered 192.168.151.2 Is this correct? (y/n)? [y]

At the prompt, enter 

 to accept the default address, or 

 to specify another IP address. In this case, 

type the address you want to use for the trusted network interface in dotted-decimal format. Confirm 
the value when prompted. 

Type the subnet mask for the interface address at the prompt or press enter for the default. Confirm 
the value when prompted.

Please enter the netmask for the interface eth0 [255.255.255.0]:

You entered 255.255.255.0, is this correct? (y/n)? [y]

Specify and confirm the address of the default gateway for the Clean Access Manager. This is 
typically the IP address of the router between the Clean Access Manager subnet and the Clean 
Access Server subnet.

Please enter the IP address for the default gateway [192.168.151.1]