Cisco Cisco NAC Appliance 4.8.3 Installation Guide
21
3
Configuration Worksheets
You will need the following information to complete the initial configuration of your NAC Appliances:
•
•
•
Note
If planning to configure your appliances for high availability (HA), you first must perform
initial installation on each appliance, then configure HA via the CAM and/or CAS web
console(s). You will need to create a virtual Service IP for the HA-pair via web configuration.
initial installation on each appliance, then configure HA via the CAM and/or CAS web
console(s). You will need to create a virtual Service IP for the HA-pair via web configuration.
Clean Access Manager (CAM) Configuration Worksheet
Table 2
CAM Configuration Utility Worksheet
For Clean Access Manager NAC Appliance
a.
IP address for eth0 interface (trusted)
1
:
b.
Subnet mask (IP netmask) for eth0 interface:
c.
Default gateway IP address for eth0 interface:
d.
Host name for your CAM:
e.
IP address of Domain Name Server on your network:
f.
Shared secret:
Must be the same for the CAM and all CASs
Must be the same for the CAM and all CASs
g.
Date, time and timezone:
h.
To generate the required temporary SSL certificate
(you can change this at a later time):
(you can change this at a later time):
FQDN or IP address of CAM:
Organization unit (e.g. Sales)
Organization name (e.g. Cisco)
Organization location (e.g. San Jose, CA, US)
Organization unit (e.g. Sales)
Organization name (e.g. Cisco)
Organization location (e.g. San Jose, CA, US)
Note
If using FQDN, make sure your DNS server
is set up for the domain name.
is set up for the domain name.
i.
Root user password:
2