Cisco Cisco NAC Appliance 4.1.0
6-14
Cisco NAC Appliance - Clean Access Server Installation and Administration Guide
OL-12213-01
Chapter 6 Configuring DHCP
Configuring IP Ranges (IP Address Pools)
Working with Subnets
View Users by MAC Address/VLAN
1.
After committing an auto-generated list, the Network > DHCP > DHCP Status page appears and
lists the newly-generated subnet. If the auto-generated subnet is restricted to a VLAN ID, the subnet
is listed by that VLAN ID; otherwise, the VLAN column is blank if no VLAN is specified.
lists the newly-generated subnet. If the auto-generated subnet is restricted to a VLAN ID, the subnet
is listed by that VLAN ID; otherwise, the VLAN column is blank if no VLAN is specified.
Figure 6-13
DHCP Status —VLANs
2.
By clicking the View MACs icon (
) for the VLAN, you can see the MAC address, IP and type
of client, as shown in
Figure 6-14
View MAC Address
–
For DHCP clients, the Type column lists “Dynamic” and the lease assignment and expiration
times are shown.
times are shown.
–
For reserved IP clients, the Type column lists “Static” and the lease time columns display N/A.
View or Delete Subnets from the Subnet List
1.
You can view the list of subnets created or modify individual subnets from Device Management >
CCA Servers > Manage [CAS_IP] > Network > DHCP > Subnet List > List.
CCA Servers > Manage [CAS_IP] > Network > DHCP > Subnet List > List.
Figure 6-15
Subnet List—List