Cisco Cisco NAC Appliance 4.5 Release Notes

After software installation, access the Clean Access Manager web admin console by opening a web 
browser and typing the IP address of the CAM as the URL. The Clean Access Manager License Form 
will appear the first time you do this to prompt you to install your FlexLM license files.

Install a valid FlexLM product license file for the Clean Access Manager (either evaluation, starter kit, 
or individual license).

At the admin login prompt, login with the web console username and password you configured when 
you installed the Clean Access Manager.

In the web console, navigate to Administration > CCA Manager > Licensing to install any additional 
license files for your CASs, CAM HA pairs or CAS HA pairs. You must install the CAS license to add 
the CASs to the CAM and an OOB CAS license to enable OOB features on the CAM.

For detailed steps on initial configuration, refer to the

For additional information on configuring your deployment, including adding the CAS(s) to the CAM, 
refer to the following guides:

Clean Access Manager 4.5(1) is bundled with version 4.5.1.0 of the Cisco NAC Appliance Agents. 

Cisco NAC Appliances assume the keyboard connected to be of US layout for both direct and IP-KVM 
connections. Use a US layout keyboard or ensure that you know the key mapping if you are connecting 
a keyboard of different layout.

This section provides instructions for how to upgrade your existing supported Cisco NAC Appliance 
platform to release 4.5. If you need to perform a CD software installation, refer instead to 

.

Refer to the following information prior to upgrade:

Cisco NAC Appliance (Cisco Clean Access) release 4.5 ED and later is a major software release with 
Early Deployment status. Cisco strongly recommends to test new releases on a pilot system prior to 
upgrading your production system.