Cisco Cisco NAC Appliance 4.5 Release Notes
![Cisco](https://files.manualsbrain.com/attachments/7380d0050044647c30f5c24bbbf5d0c0b6d9bb84/common/fit/150/50/faa183d287233c52228cfea3dbc2a127fe780f60564fcb0955d9c3d1cd23/brand_logo.png)
2
Release Notes for Cisco NAC Appliance, Version 4.5(1)
OL-16409-01
Cisco NAC Appliance Releases
Cisco NAC Appliance Releases
Note
Any ED release of software should be utilized first in a test network before being deployed in a
production network.
production network.
System and Hardware Requirements
This section describes the following:
•
•
•
•
•
Licensing
You must obtain and install Cisco NAC Appliance product licenses for the Clean Access Manager
(CAM) and Clean Access Server (CAS) in order for your deployment to function. Install the CAM
product license in the CAM License Form to initially access the CAM web admin console. Once you can
access the CAM web console, upload the additional CAM HA license or CAS license(s) into the CAM
(under Administration > CCA Manager > Licensing) in order to add CASs to the CAM, including the
Cisco NAC network module. An OOB CAS license must be present to access the “OOB Management”
module of the CAM. The Licensing page displays the types of licenses present after they are added.
(CAM) and Clean Access Server (CAS) in order for your deployment to function. Install the CAM
product license in the CAM License Form to initially access the CAM web admin console. Once you can
access the CAM web console, upload the additional CAM HA license or CAS license(s) into the CAM
(under Administration > CCA Manager > Licensing) in order to add CASs to the CAM, including the
Cisco NAC network module. An OOB CAS license must be present to access the “OOB Management”
module of the CAM. The Licensing page displays the types of licenses present after they are added.
Note that both CAM and CAS product licenses are generated based on the eth0 MAC address of the
CAM. For High Availability (HA) pairs, you must generate an additional CAM HA license based on the
eth0 MAC addresses of both Primary and Secondary CAMs and install it on the CAM whether you are
adding a CAM HA-pair or CAS HA-pair.
CAM. For High Availability (HA) pairs, you must generate an additional CAM HA license based on the
eth0 MAC addresses of both Primary and Secondary CAMs and install it on the CAM whether you are
adding a CAM HA-pair or CAS HA-pair.
For complete details on service contract support, obtaining new and evaluation licenses, legacy licenses
and RMA, refer to
and RMA, refer to
Hardware Support
This section contains the following topics:
•
•
Cisco NAC Appliance Version
Availability
4.5.2.0 Cisco Clean Access Agent
July 9, 2009
4.5(1) ED
February 25, 2009
4.5 ED
October 21, 2008