Cisco Cisco Mobility Unified Reporting Administrator's Guide
System Interface and Port Configuration Procedures
Creating and Configuring ATM Interfaces and Ports ▀
Cisco ASR 5000 System Administration Guide ▄
OL-24498-04
103
Intf Name: ipoa
Intf Type: Point to point
IP State: UP (Bound to 31/1 untagged, ifIndex 285278209)
IP Address: 192.168.100.3 Subnet Mask: 255.255.255.0
Bcast Address: 192.168.100.255 MTU: 1500
Resoln Type: ARP ARP timeout: 3600 secs
Number of Secondary Addresses: 0
Total interface count: 1
Intf Type: Point to point
IP State: UP (Bound to 31/1 untagged, ifIndex 285278209)
IP Address: 192.168.100.3 Subnet Mask: 255.255.255.0
Bcast Address: 192.168.100.255 MTU: 1500
Resoln Type: ARP ARP timeout: 3600 secs
Number of Secondary Addresses: 0
Total interface count: 1
Step 2
Verify that your port configuration settings are correct by entering the following command:
show configuration port slot#/port#
This command produces an output similar to that displayed in the following example:
config
port atm 31/1
no shutdown
pvc vpi 121 vci 4444
no shutdown
bind interface ipoa sgsn3g
#exit
#exit
end
port atm 31/1
no shutdown
pvc vpi 121 vci 4444
no shutdown
bind interface ipoa sgsn3g
#exit
#exit
end