Cisco Cisco ME 3400EG-2CS-A Switch Release Notes
9
Release Notes for the Cisco ME 3400E and ME 3400 Ethernet Access Switches, Cisco IOS Release 12.2(60)EZ and Later
OL-29325-07
Minimum Cisco IOS Release for Major Features
•
ME-3400-E Metro Base Image
–
me340x-metrobasek9-mz.122-60.EZ
–
me340x-metroaccessk9-mz.122-60.EZ
–
me340x-metroipaccessk9-mz.122-60.EZ
–
me340x-metrobasek9-tar.122-60.EZ
–
me340x-metroaccessk9-tar.122-60.EZ
–
me340x-metroipaccessk9-tar.122-60.EZ
Minimum Cisco IOS Release for Major Features
lists the minimum software release (after the first release) required to support the features of the
Cisco ME 3400E and ME 3400 switch. Features not listed are supported in all releases.
Note
The first release for the Cisco ME3400E switch was 12.2(44)EY, and it included all ME 3400 features
through release 12.2(44)SE.
through release 12.2(44)SE.
Table 3
Features Introduced After the First Release and the Minimum Cisco IOS Release Required
Feature
Minimum Cisco IOS Release
Required
Required
IPv6 QoS features
12.2(60)EZ
IPv6 IS-IS
12.2(60)EZ
REP 2 Edge No-Neighbor Ports on Single Node
12.2(58)EZ
VACL logging
12.2(58)SE1
Call Home support
12.2(58)SE1
IP/IF MIBs for IPv6
12.2(58)SE1
NTPv4 over IPv6
12.2(58)SE1
DHCPv6 bulk lease query and DHCPv6 relay source configuration
12.2(58)SE1
RADIUS, TACACS+, and SSH/SCP over IPv6
12.2(58)SE1
VRRP version 4 support
12.2(58)SE1
GLBP for IPv4 and IPv6 with VRF-Lite
12.2(58)SE1
IPv6 unicast routing in VRF-Lite
12.2(58)SE1
VRF-aware IPv6 DHCP server and client support
12.2(58)SE1
802.1Q LLDP tunneling
12.2(58)SE1
Configuration of an alternate MTU value for specific interfaces
12.2(55)SE
BFD Protocol on SVIs
12.2(55)SE
Support for 802.1ad split horizon (ME 3400E).
12.2(55)SE
QoS classification and marking DEI bit in an IEEE 802.1ad frame (ME 3400E)
12.2(55)SE
Support for the IEEE 802.1ad standard (ME 3400E).
12.2(54)SE