Cisco Cisco Aironet 1400 Wireless Bridge Installation Guide
R E V I E W D R A F T — C I S C O C O N F I D E N T I A L
5
EU Directive 1999/5/EC: Compliance Information for the Cisco Aironet 1430 Series Wireless Bridges
78-18982-01
Declaration of Conformity with Regard to the EU Directive 1999/5/EC (R&TTE Directive)
The 5-GHz wireless bridges—Cisco Aironet AIR-BR1430UI0-E-K9 and AIR-BR1430UI1-E-K9—have
integrated antennas which cannot be removed or which are not user accessible. Nevertheless, as
regulatory limits are not the same throughout the EU, users may need to adjust the conducted power
setting for the radio to meet the EIRP limits applicable in their country or region.
integrated antennas which cannot be removed or which are not user accessible. Nevertheless, as
regulatory limits are not the same throughout the EU, users may need to adjust the conducted power
setting for the radio to meet the EIRP limits applicable in their country or region.
Products with Dedicated (External) Antennas:
•
AIR-BR1430UN0-E-K9
•
AIR-BR1430UN1-E-K9
The Cisco Aironet AIR-BR1430UN0-E-K9 and the AIR-BR1430UN1-E-K9 wireless bridges are
equipped with N-type antenna connectors to allow the use of dedicated (external) antennas available
from Cisco.
equipped with N-type antenna connectors to allow the use of dedicated (external) antennas available
from Cisco.
list the antennas that can be used with these products. All antennas where assessed together with
the equipment against the requirements of the R&TTE directive. The table also lists the maximum
conducted power setting for each of the antennas.
conducted power setting for each of the antennas.
Depending on the country, a different regulatory limit might be applicable. It is therefore the
responsibility of the end user to select a power level that, together with the antenna, results in an eirp
(radiated power) level that is below the applicable limit.
responsibility of the end user to select a power level that, together with the antenna, results in an eirp
(radiated power) level that is below the applicable limit.
Operating Frequency
This devices operates within the 5470-MHz to 5725-MHz band.
Table 1
Maximum Conducted Power Settings—Integral Antennas
Cisco Part Number
Antenna
Gain (dBi)
Gain (dBi)
Regulatory Limit
(eirp) (dBm/mW)
(eirp) (dBm/mW)
Maximum
Conducted Power
Setting (dBm)
Conducted Power
Setting (dBm)
1
1.
Available conducted power settings for this product are 4, 7, and 10 dBm.
Antenna
Description
Description
AIR-BR1430UI0-E-K9
AIR-BR1430UI1-E-K9
AIR-BR1430UI1-E-K9
20
30/1000
10
Integral antenna
Table 2
Maximum Conducted Power Settings—External Antennas
Antenna Part Number
Antenna
Gain (dBi)
Gain (dBi)
Regulatory
Limit (eirp)
(dBm/mW)
Limit (eirp)
(dBm/mW)
Maximum
Conducted Power
Setting (dBm)
Conducted Power
Setting (dBm)
1
1.
Available conducted power settings for this product are 4, 7, 10, 13, and 16 dBm.
Antenna Name
AIR-ANT5180V-N
8
30/1000
16
Omni-directional antenna
AIR-ANT58G10SSA-N
9.5
16
Sector antenna
AIR-ANT5114P-N
14
16
Patch antenna
AIR-ANT5117S-N
17
13
90-degree sector antenna