Cisco Cisco Secure Access Control System 5.1 Installation Guide

This section includes all regulatory, safety, EMC (Class A or Class B), telecom, and NEBS standards. 
Cisco ISE 3315, Cisco ISE 3355, Cisco ISE 3395, CSACS-1121, and Cisco NAC Appliance 4.7 are in 
compliance with national and international standards as described in 

.

For specific details about the years, revisions and relevant amendments please refer to the applicable 
declaration of conformity available at

.

This section applies to products to be installed in the European Union. 

The equipment is intended to operate under the following environmental conditions with respect to 
EMC:

A separate defined location under user’s control. 

Earthing and bonding shall meet the requirements of ETS 300 253 or CCITT K27.

AC power distribution shall be one of the following types, where applicable: TN-S and TN-C as 
defined in IEC 364-3.

In addition, if the equipment is operated in a domestic environment, interference may occur.

Regulatory Compliance

Products with the CE Marking indicate compliance with the 
2006/95/EC and 2004/108/EC directives, which include the 
safety and EMC standards listed.

Safety

UL 60950
CAN/CSA -C22.2 No. 60950
EN 60950
IEC 60950
AS/NZS 60950

EMC

FCC Part 15 (CFR 47) Class A
ICES-003 Class A
EN55022 Class A
CISPR22 Class A 
AS/NZ CISPR22 Class A
CNS13438 Class A
CISPR24 
KN24 
VCCI Class A
EN55024
EN61000-3-2
EN61000-3-3
KN22 Class A