Cisco Cisco Nexus 1010 Virtual Services Appliance Release Notes

2014 Oct 2 09:28:33 switch Oct 2 09:28:33 %KERN-1-SYSTEM_MSG: Failed to send MTS message. 

error:-1 - kernel

2014 Oct 2 09:28:34 switch %SYSMGR-2-SWITCHOVER_OVER: Switchover completed.

2014 Oct 2 09:28:58 switch %PLATFORM-2-MOD_REMOVE: Module 1 removed (Serial number )

switch# 2014 Oct 2 09:36:09 switch %PLATFORM-2-MOD_DETECT: Module 1 detected (Serial 

number :unavailable) Module-Type Cisco Virtual Services Appliance Model :unavailable

Verify that the module is online. When HA is complete, verify that the upgrade procedure is complete:

switch# show system redundancy status

Redundancy role

---------------

administrative: secondary

operational: secondary

Redundancy mode

---------------

administrative: HA

operational: HA

This supervisor (sup-2)

-----------------------

Redundancy state: Active

Supervisor state: Active

Internal state: Active with HA standby

Other supervisor (sup-1)

------------------------

Redundancy state: Standby

Supervisor state: HA standby

Internal state: HA standby

If you are upgrading from a release earlier than 5.2(1)SP1(7.1), the procedure is the same as for the 
earlier release. For upgrade instructions, see the 

.

CSCuj77643

Deploying or removing the Citrix NetScaler 1000V restarts the Cisco Nexus 1000V VSM and the Cisco 
Virtual Security Gateway VSBs of all 4.2(x) releases.

CSCuo98930

A configuration change does not get copied automatically to the startup configuration for the following 
commands:

• (config-if)# channel-group

• (config-svs-domain)# control uplink uplink int

• (config-svs-domain)# management uplink uplink int