Cisco Cisco Packet Data Gateway (PDG)

Page of 1868
Specifies the action to be taken on expiry of long duration timeout duration ldt_timeout set with timeout
long-duration 
command.
• detection: sets the system to detect the sessions for which long duration timeout timer is exceeded and
sends the SNMP TRAP and CORBA notification. This is the default behavior.
• disconnect: sets the system to send SNMP TRAP and CORBA notification and disconnect the subscriber
session once the long duration timeout timer is expired.
Usage Guidelines
Use this command to set the long duration timeout period and actions to be taken on expiry of duration of
timer for subscriber session.
Reduce the timeout duration to free session resources faster for use by new requests.
Important
In case of long-duration timeout configured at PCC Service Configuration mode as well as at the
PCC-Profile Configuration mode level, the long-duration timeout and action set in PCC-Profile
Configuration mode will prevail. This enables defining session behavior as per profile provisioning.
Important
Examples
Following command sets the system to detect the subscriber sessions that exceeds the long duration timer of
6000 seconds and sends SNMP TRAP and CORBA notification:
timeout long-duration 6000 action detection
Following command sets the system to detect and disconnect the subscriber sessions that exceeds the long
duration timer of 6000 seconds and disconnect the session after sending SNMP TRAP and CORBA notification:
timeout long-duration 6000 action disconnect
Command Line Interface Reference, Modes I - Q, StarOS Release 19    
1401
PCC-Service-Profile Configuration Mode Commands
timeout long-duration