Cisco Cisco ASR 5000
ALCAP Configuration Mode Commands
▀ timeout alcap
▄ Command Line Interface Reference, StarOS Release 18
1280
mod
mod_timer_value
Specifies the maximum time, in seconds, the system waits for response from adjacent AAL2 node before
reporting the failure of AAL2 Modify Request procedure. When a request to modify a connection or channel
through ALCAP-MODIFY-REQUEST message is sent to AAL2 node the system starts the Timer_MOD
timer. The timer waits for specified timeout duration
reporting the failure of AAL2 Modify Request procedure. When a request to modify a connection or channel
through ALCAP-MODIFY-REQUEST message is sent to AAL2 node the system starts the Timer_MOD
timer. The timer waits for specified timeout duration
mod_timer_value
for ALCAP-MODIFY-CONFRIM
message before reporting error in procedure and system requests ALCAP Manager to initiates the RESET or
any other appropriate procedure for this channel and HNB-GW shall release the RUA connection towards
HNB and SCCP connection towards CN.
If AAL2 Node responds with ALCAP-MODIFY-CONFRIM message the timer will stop before the expiry of
timeout duration and system reports the successful completion of the procedure.
any other appropriate procedure for this channel and HNB-GW shall release the RUA connection towards
HNB and SCCP connection towards CN.
If AAL2 Node responds with ALCAP-MODIFY-CONFRIM message the timer will stop before the expiry of
timeout duration and system reports the successful completion of the procedure.
mod_timer_value
must be an integer value from 5 through 30.
Default: 5
rel
rel_timer_value
Specifies the maximum time, in seconds, the system waits for response from adjacent AAL2 node before
reporting the failure of AAL2 Release Request procedure. When a request to release a connection or channel
through ALCAP-RELEASE-REQUEST message is sent to AAL2 node the system starts the Timer_REL
timer and sends RAB-ASST-REQ to HNB. The timer waits for specified timeout duration
reporting the failure of AAL2 Release Request procedure. When a request to release a connection or channel
through ALCAP-RELEASE-REQUEST message is sent to AAL2 node the system starts the Timer_REL
timer and sends RAB-ASST-REQ to HNB. The timer waits for specified timeout duration
rel_timer_value
for ALCAP-RELEASE-CONFRIM message before reporting error in procedure and
system requests ALCAP Manager to release the AAL2 channel. System also indicates to start RESET
procedure for this channel.
If AAL2 Node responds with ALCAP-RELEASE-CONFRIM message the timer will stop before the expiry
of timeout duration and system reports the successful completion of the procedure.
procedure for this channel.
If AAL2 Node responds with ALCAP-RELEASE-CONFRIM message the timer will stop before the expiry
of timeout duration and system reports the successful completion of the procedure.
rel_timer_value
must be an integer value from 2 through 60.
Default: 2
res
res_timer_value
Specifies the maximum time, in seconds, the system waits for response from adjacent AAL2 node before
reporting the failure of AAL2 Reset Request procedure. When a request to reset a connection or channel
through ALCAP-RESET-REQUEST message is sent to AAL2 node the system starts the Timer_RES timer.
The timer waits for specified timeout duration
reporting the failure of AAL2 Reset Request procedure. When a request to reset a connection or channel
through ALCAP-RESET-REQUEST message is sent to AAL2 node the system starts the Timer_RES timer.
The timer waits for specified timeout duration
res_timer_value
for ALCAP-RESET-CONFRIM message
before retrying the RESET procedure. The system will retry the RESET procedure for configured number of
times and on completion of retry limit the stops the RESET procedure for the affected path and path will
become available for connections.
If AAL2 Node responds with ALCAP-RESET-CONFRIM message the timer will stop before the expiry of
timeout duration and system reports the successful completion of the procedure.
times and on completion of retry limit the stops the RESET procedure for the affected path and path will
become available for connections.
If AAL2 Node responds with ALCAP-RESET-CONFRIM message the timer will stop before the expiry of
timeout duration and system reports the successful completion of the procedure.
res_timer_value
must be an integer value from 2 through 60.
Default: 2
ubl
ubl_timer_value
Specifies the maximum time, in seconds, the system waits for response from adjacent AAL2 node before
reporting the failure of AAL2 Path UnBlock procedure. When a request to unblock a particular AAL2 path is
recieved by ALCAP service, the ALCAP service sends ALCAP-UNBLOCK-REQEST message to AAL2
node/peer ALCAP Manager and start Timer_BLO timer. The timer waits for specified timeout duration
reporting the failure of AAL2 Path UnBlock procedure. When a request to unblock a particular AAL2 path is
recieved by ALCAP service, the ALCAP service sends ALCAP-UNBLOCK-REQEST message to AAL2
node/peer ALCAP Manager and start Timer_BLO timer. The timer waits for specified timeout duration
ubl_timer_value
for ALCAP-UNBLOCK-CONFRIM message before reporting error in procedure.
If AAL2 node/peer ALCAP Manager responds with ALCAP-BLOCK-CONFRIM message the timer will
stop before the expiry of timeout duration and system reports the successful completion of the procedure.
stop before the expiry of timeout duration and system reports the successful completion of the procedure.
ubl_timer_value
must be an integer value from 2 through 60.
Default: 2