Cisco Cisco ASR 5000
APN Configuration Mode Commands
pdp-type ▀
Command Line Interface Reference, StarOS Release 18 ▄
1431
Usage
IP PDP context types are those in which the MS is communicating with a PDN such as the Internet or an
intranet using IP. PPP PDP contexts are those in which PPP or PPP Network Control Protocol (NCP) frames
from the MS are either terminated at, or forwarded by the GGSN.
If a session specifies a PDP type that is not supported by the APN, the system rejects the session with a cause
code of 220 (DCH, Unknown PDP address or PDP type).
intranet using IP. PPP PDP contexts are those in which PPP or PPP Network Control Protocol (NCP) frames
from the MS are either terminated at, or forwarded by the GGSN.
If a session specifies a PDP type that is not supported by the APN, the system rejects the session with a cause
code of 220 (DCH, Unknown PDP address or PDP type).
Caution:
For the IPv6 calls to work, the destination context must have at least one IPv6 interface configured.
Example
The following command configures the APN to support PPP context types:
pdp-type ppp