Cisco Cisco ASR 5000
AAA Server Group Configuration Mode Commands
▀ diameter accounting
▄ Command Line Interface Reference, StarOS Release 18
152
hd-mode
: Sends records to the Diameter server, if all Diameter servers are down or unreachable, then copies
records to the local HDD and periodically retries the Diameter server.
max-retries
: Sets the retry attempts for Diameter accounting in the current AAA group to default 0
(disable).
max-transmissions
: Sets the configured maximum transmission attempts for Diameter accounting in the
current AAA group to default 0 (disable).
request-timeout
: Sets the timeout duration, in seconds, for Diameter accounting requests in the current
AAA group to default 20.
upgrade-dict-avps
: Sets the release version to 3GPP Rel. 8 for upgrading Diameter accounting dictionary
in the current AAA group.
dictionary { aaa-custom1 | aaa-custom10 | aaa-custom2 | aaa-custom3 | aaa-custom4
| aaa-custom5 | aaa-custom6 | aaa-custom7 | aaa-custom8 | aaa-custom9 | dynamic-
load | nasreq | rf-plus }
| aaa-custom5 | aaa-custom6 | aaa-custom7 | aaa-custom8 | aaa-custom9 | dynamic-
load | nasreq | rf-plus }
Specifies the Diameter accounting dictionary.
aaa-custom1 ... aaa-custom10
: Configures the custom dictionaries. Even though the CLI syntax
supports several custom dictionaries, not necessarily all of them have been defined. If a custom dictionary
that has not been implemented is selected, the default dictionary will be used.
that has not been implemented is selected, the default dictionary will be used.
dynamic-load
: Configures the dynamically loaded Diameter dictionary. The dictionary name must be an
alphanumeric string of 1 through 15 characters. For more information on dynamic loading of Diameter
dictionaries, see the
dictionaries, see the
diameter dynamic-dictionary
in the Global Configuration Mode Commands
chapter of this guide.
nasreq
: nasreq dictionary—the dictionary as defined by RFC 3588.
rf-plus
: RF Plus dictionary.
endpoint endpoint_name
Enables Diameter to be used for accounting, and specifies which Diameter endpoint to use.
endpoint_name
must be a string of 1 through 63 characters.
hd-mode fall-back-to-local
Specifies that records be copied to the local HDD if the Diameter server is down or unreachable. CDF/CGF
will pull the records through SFTP.
will pull the records through SFTP.
hd-storage-policy hd_policy
Associates the specified HD Storage policy with the AAA group.
hd_policy
must be the name of a configured HD Storage policy, and must be an alphanumeric string of 1
through 63 characters.
HD Storage policies are configured through the Global Configuration Mode.
This and the
HD Storage policies are configured through the Global Configuration Mode.
This and the
hd-mode
command are used to enable the storage of Rf Diameter Messages to HDD in case all
Diameter Servers are down or unreachable.
max-retries max_retries
Specifies how many times a Diameter request should be retried with the same server, if the server fails to
respond to a request.
respond to a request.
max_retries
specifies the maximum number of retry attempts, and must be an integer from 1 through 1000.
Default: 0