Cisco Cisco ASR 5000
BITS Port Configuration Mode Commands
▀ default
▄ Command Line Interface Reference, StarOS Release 18
1692
default
Restores the BITS port’s default speed and communication mode.
Product
SGSN
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > BITS Port Configuration
configure > port bits slot_number/port_number
Entering the above command sequence results in the following prompt:
[local]host_name(config-port-slot_number/port_number)#
Syntax
default { mode | preferred slot }
mode
Default: none
Sets the default for the ports framing mode.
Sets the default for the ports framing mode.
preferred slot
Default: non-revertive
Sets the port for non-revertive operation for port redundancy auto-recovery; requiring an administrative user
to manually issue a
Sets the port for non-revertive operation for port redundancy auto-recovery; requiring an administrative user
to manually issue a
port switch
command to return service to the original port.
Usage
Restores port-level parameters to their default values.
Example
Use the following command to remove any setting for this port’s framing mode:
default mode