Cisco Cisco ASR 5000
Call Control Profile Configuration Mode
▀ access-restriction-data
▄ Command Line Interface Reference, StarOS Release 18
1910
8 - GPRS services and non-GPRS services not allowed
9 - MSID cannot be derived by the network
10 - Implicitly detached
11 - PLMN not allowed
12 - Location Area not allowed
13 - Roaming not allowed in this location area
14 - GPRS services not allowed in this PLMN
15 - No Suitable Cells In Location Area
16 -MSC temporarily not reachable
17 - Network failure
20 - MAC failure
21 - Synch failure
22 - Congestion
23 - GSM authentication unacceptable
40 - No PDP context activated
48 to 63 - retry upon entry into a new cell
95 - Semantically incorrect message
96 - Invalid mandatory information
97 - Message type non-existent or not implemented
98 - Message type not compatible with state
99 - Information element non-existent or not implemented
100 - Conditional IE error
101 - Message not compatible with the protocol state
111 - Protocol error, unspecified
no-check
Including this keyword with the command disables the ARD checking behavior.
Usage
By default, the SGSN checks access restriction data (ARD) within incoming insert subscriber data (ISD)
messages. This enables operator to selectively restrict subscribers in either 3G (UTRAN) or 2G (GERAN).
The SGSN ARD checking behavior occurs during the attach procedure and if a reject occurs, the SGSN sends
the subscriber an Attach Reject message with a configurable failure cause code.
messages. This enables operator to selectively restrict subscribers in either 3G (UTRAN) or 2G (GERAN).
The SGSN ARD checking behavior occurs during the attach procedure and if a reject occurs, the SGSN sends
the subscriber an Attach Reject message with a configurable failure cause code.
Example
For this call control profile, the following command disables the ARD checking function:
access-restriction-data no-check