Cisco Cisco ASR 5000
Accounting Policy Configuration Mode Commands
▀ cc
▄ Command Line Interface Reference, StarOS Release 18
240
time2
min hrs...time4
minutes hours
: Specifies the second, third and fourth time-of-day values used
to close containers in the charging record.
min
must be an integer value from 0 through 59.
hrs
must be an
integer value from 0 through 23.
volume { downlink octets { uplink octets } | total octets
| uplink octets
{
downlink octets
} }
Specifies octet volume thresholds for the generation of interim CDRs.
downlink
octets
: Sets the threshold limit for the number of downlink octets that must be reached before
the charging record is closed.
In 12.1 and earlier releases, the downlink
In 12.1 and earlier releases, the downlink
octets
must be an integer value from 100000 to 1345294336.
In 12.2 and later releases, the downlink
octets
must be an integer value from 100000 to 4000000000.
total
octets
: Sets the threshold limit for the total number of octets that must be reached before the
charging record is closed.
In 12.1 and earlier releases, the total
In 12.1 and earlier releases, the total
octets
must be an integer value from 100000 to 400000000.
In 12.2 and later releases, the total
octets
must be an integer value from 100000 to 4000000000.
uplink
octets
: Sets the threshold limit for the number of uplink octets that must be reached before the
charging record is closed.
In 12.1 and earlier releases, the uplink
In 12.1 and earlier releases, the uplink
octets
must be an integer value from 100000 to 400000000.
In 12.2 and later releases, the uplink
octets
must be an integer value from 100000 to 4000000000.
Usage
Use this command to set charging characteristics that directly affect the CDR generation on the HSGW, P-
GW, or S-GW.
GW, or S-GW.
Example
The following command creates a hot billing profile with a total octet volume threshold set to 500000:
cc profile 1 volume total 500000