Cisco Cisco ASR 5000
Context Configuration Mode Commands E-H
gtpp dictionary ▀
Command Line Interface Reference, StarOS Release 18 ▄
2475
custom4
This is a custom-defined dictionary that conforms to TS 32.015 v 3.6.0 for R99 except that:
IP addresses are encoded in binary format.
The Data Record Format Version information element contains 0x1307 instead of 0x1308.
QoS Requested is not present in the LoTV containers.
QoS negotiated is added only for the first container and the container after a QoS change.
custom5
Custom-defined dictionary.
custom6
This is a custom-defined dictionary for eG-CDR encoding.
custom7 ... custom30
These custom-defined dictionary have default behavior or “standard” dictionary.
custom31
This is a custom-defined dictionary for S-CDR encoding that is based on 3GPP TS 32.298 v6.4.1 with a
special field appended for the PLMN-ID.
special field appended for the PLMN-ID.
custom33
This ia a custom-defined dictionary for S-CDR encoding that is based on the 3GPP TS 32.298v6.4.1 with the
following exceptions:
following exceptions:
Proprietary PLMN-ID field is present.
It is a SEQUENCE and not a SET.
Diagnostics and SGSN-Change fields are not supported.
Indefinite length encoding is used.
Booleans are encoded as 0x01(3GPP it is 0xff).
IMEISV shall be sent if available else IMEI should be sent.
Record Sequence Number is Mandatory.
APN OI and NI part is length encoded.
Cause for Record closure should be “RAT Change” instead of “intra-SGSNinter-system”.
standard
Default: Enabled
This dictionary conforms to TS 32.215 v 4.6.0 for R4 (and also R5 - extended QoS format).
This dictionary conforms to TS 32.215 v 4.6.0 for R4 (and also R5 - extended QoS format).
Usage
Use this command to designate specific dictionary used by GTPP for specific context.