Cisco Cisco ASR 5000

 

Configures the routing behavior for overlap-pool addresses. 

 

PDSN 

 

Security Administrator, Administrator 

 

Exec > Global Configuration > Context Configuration 

configure > context context_name

 

Entering the above command sequence results in the following prompt: 

[context_name]host_name(config-ctx)# 

 

[ no | default ] ip routing overlap-pool 

 

Resets the command to its default setting of disabled. 

 

Disables the routing behavior for overlap-pool addresses for the current context. 

Use this command configuration to advertise overlap-pool addresses in dynamic routing protocols when 
overlap pools are configured using vlan-ids. If the “iprouting overlap-pool” is configured, then the overlap-
addresses are added as interface addresses and advertised.