Cisco Cisco ASR 5000
Context Configuration Mode Commands N-R
▀ pcc-af-service
▄ Command Line Interface Reference, StarOS Release 18
2668
A maximum of 256 services (regardless of type) can be configured per system.
Caution:
Large numbers of services greatly increase the complexity of management and may impact overall
system performance (for example, resulting from such things as system handoffs). Therefore, it is recommended that a
large number of services only be configured if your application absolutely requires it. Please contact your local service
representative for more information.
large number of services only be configured if your application absolutely requires it. Please contact your local service
representative for more information.
Entering this command results in the following prompt:
[context_name]hostname(config-imsapp-service)#
The commands available in this mode are defined in the PCC -AF Service Configuration Mode Commands
chapter.
chapter.
Caution:
This is a critical configuration. The PCC-AF service cannot be configured without this configuration.
Any change to this configuration would lead to restarting the PCC-AF service and removing or disabling this
configuration will stop the PCC-AF service.
configuration will stop the PCC-AF service.
Example
The following command enters the existing PCC-AF Service Configuration Mode (or creates it if it does not
already exist) for the service named
already exist) for the service named
af-service1
:
pcc-af-service af-service1
The following command will remove
af-service1
from the system:
no pcc-af-service af-service1