Cisco Cisco ASR 5000
Credit Control Configuration Mode Commands
gy-rf-trigger-type ▀
Command Line Interface Reference, StarOS Release 18 ▄
2863
threshold
Enables Gy trigger “threshold” for Rf.
validity-time
Enables Gy trigger “validity-time” for Rf.
Usage
Use this command to enable the Gy reporting reasons/event triggers.
For all the Gy event triggers a container will be cached at Rf and will be sent based on other events at Rf (for
example, max-charging-change-condition, RAT-Change, etc).
For all the Gy event triggers a container will be cached at Rf and will be sent based on other events at Rf (for
example, max-charging-change-condition, RAT-Change, etc).
Important:
The CLI command “gy-rf-trigger-type” is currently applicable only for CCR-U and not CCR-T.
For example, when the CLI for QUOTA_EXHAUSTED event trigger is configured under credit-control
group configuration, if there is quota_exhausted event then the container should be cached with appropriate
change-condition value and ACR-I would be sent out based on other Rf event triggers. Similar behavior is
applicable to other event triggers when configured.
group configuration, if there is quota_exhausted event then the container should be cached with appropriate
change-condition value and ACR-I would be sent out based on other Rf event triggers. Similar behavior is
applicable to other event triggers when configured.
Example
The following command specifies the validity-time event trigger to be enabled.
gy-rf-trigger-type validity-time