Cisco Cisco ASR 5000

Page of 9109
  CSCF Emergency-CSCF Configuration Mode Commands  
plani  ▀   
 
Command Line Interface Reference, StarOS Release 18  ▄  
 
   
3133 
plani 
Sets parameters associated with P-LANI (P-Last-Access-Network-Info) header. 
Product
 
SCM: E-CSCF 
Privilege
 
Administrator 
Mode
 
Exec > Global Configuration > Context Configuration > CSCF Service Configuration > Emergency-CSCF 
Configuration 
configure > context context_name > cscf service service_name > emergency-cscf
 
Entering the above command sequence results in the following prompt: 
[context_name]host_name(config-cscf-service-emergency-cscf)# 
Syntax
 
plani age seconds 
[ default | no ] plani age 
default
 
Sets the acceptable P-LANI age to 7200 seconds. 
no
 
Removes the acceptable P-LANI age configured for the E-CSCF. 
age seconds
 
Specifies the acceptable P-LANI age from registration time. 
seconds
 must be an integer from 1 to 65535. 
Default: 7200 
Usage 
This command is used to identify location aging of subscriber is within acceptable limits. 
Two timestamps are included in Emergency SIP INVITES P-LANI header to determine the “location age” of 
the last known cellular information at registration. The first timestamp shall be the date/time the P-LANI was 
captured. The second timestamp shall be the data and time of the Initial registration for voice services. The E-
CSCF shall calculate the delta between the two timestamps to determine the P-LANI location age at 
registration. E-CSCF will compare the P-LANI location age to the “p-lani-acceptable-age” specified in this 
command. E-CSCF will omit/disregard the LDAP query for CGI location when “p-lani-acceptable-age” is 
exceeded. 
Example
 
The following command sets the acceptable P-LANI age for the E-CSCF to 
5000
 seconds: