Cisco Cisco ASR 5000
CSCF Routes Configuration Mode Commands
▀ route
▄ Command Line Interface Reference, StarOS Release 18
3272
Important:
AoR regular expressions are supported. Refer to the SCM Engineering Rules Appendix in the
Session Control Manager Administration Guide for more information about regular expressions.
filter-criteria2 criteria
Specifies the filter criteria that packets that have passed the base criteria and filter-criteria1 will be compared
against. The following criteria is supported:
against. The following criteria is supported:
access-type
type
: Filters sessions based on a specific access-type used by the subscriber. Possible
access types are:
3gpp-geran
: 3GPP Access Type
3gpp-utran-fdd
: 3GPP Access Type
3gpp-utran-tdd
: 3GPP Access type
3gpp2-1x
: 3GPP2 Access Type
3gpp2-1x-hrpd
: 3GPP2 Access Type
3gpp2-cdma-cs
: 3GPP2-CDMA-CS
3gpp2-umb
: 3GPP2-UMB
adsl
: FixedLine Access Type
adsl2
: FixedLine Access Type
adsl2p
: FixedLine Access Type ADSL2+
docsis
: DOCSIS
gshdsl
: Fixed Line Access Type G.SHDSL
hdsl
: Fixed Line Access Type
hdsl2
: Fixed Line Access Type
idsl
: Fixed Line Access Type
ieee-80211
: WLAN Access Type
ieee-80211a
: WLAN Access Type
ieee-80211b
: WLAN Access Type
ieee-80211g
: WLAN Access Type
ieee-80216e
: Wireless MAN Access Type
radsl
: Fixed Line Access Type
sdsl
: Fixed Line Access Type
vdsl
: Fixed Line Access Type
any
: Filters all CSCF sessions.
carrier-id
name
: Filters sessions based on the carrier’s ID.
name
must be from 1 to 79 alpha and/or
numeric characters in length.
destination aor
aor
: Filters sessions based on the destination AoR.
aor
must be an existing AoR
from 1 to 79 characters in length.