Cisco Cisco ASR 5000
Exec Mode Commands (D-S)
debug ip ospf nsm ▀
Command Line Interface Reference, StarOS Release 18 ▄
4063
debug ip ospf nsm
Enables or disables troubleshooting OSPF Neighbor State Machines (NSMs), based on the specific NSM information
type. If no keyword is specified, all NSM information types are enabled. If logging is enabled, results are sent to the
logging system.
type. If no keyword is specified, all NSM information types are enabled. If logging is enabled, results are sent to the
logging system.
Product
PDSN
HA
GGSN
Privilege
Security Administrator, Administrator, Operator
Mode
Exec
The following prompt is displayed in the Exec mode:
[local]host_name#
Syntax
[ no ] debug ip ospf nsm [ status | events | timers ]
no
Disables the debugging the specified NSM information type. If no keyword is specified, all information types
are disabled.
are disabled.
events
Enables debugging NSM event information.
status
Enables debugging NSM status information.
timers
Enables debugging NSM timer information.
Usage
Use this command to output debug information for OSPF NSMs
Example
To enable all NSM debug information, enter the following command;
debug ip ospf nsm
To disable all NSM debug information, enter the following command;
no debug ip ospf nsm