Cisco Cisco ASR 5000
Exec Mode Commands (D-S)
debug ip ospf router ▀
Command Line Interface Reference, StarOS Release 18 ▄
4067
debug ip ospf router
Sets the debug option for OSPF router information. If no keyword is specified, all router information is enabled. If
logging is enabled, results are sent to the logging system.
logging is enabled, results are sent to the logging system.
Product
PDSN
HA
GGSN
Privilege
Security Administrator, Administrator, Operator
Mode
Exec
The following prompt is displayed in the Exec mode:
[local]host_name#
Syntax
[ no ] debug ip ospf router [ interface | redistribute ]
no
Disables the specified router debug information. If no keyword is specified, all router information is disabled.
interface
Enables router interface information.
redistribute
Enables router redistribute information.
Usage
Use this command to output debug information for the OSPF router.
Example
To enable all router debug information, enter the following command;
debug ip ospf router
To disable all router debug information, enter the following command;
no debug ip ospf router