Cisco Cisco ASR 5000
Exec Mode Commands (D-S)
▀ filesystem synchronize
▄ Command Line Interface Reference, StarOS Release 18
4100
-noconfirm
Executes the command without displaying “are you sure” prompts.
Usage
Synchronize the file systems between active and standby storage devices.
Example
The following command all file systems on system management cards:
filesystem synchronize al1
The following command sequence appears when filesystem synchronize /flash is run after save
configuration /flash/filename -redundant is executed and a change has been made to the configuration:
configuration /flash/filename -redundant is executed and a change has been made to the configuration:
filesystem synchronize /flash
2 to be updated on card 2
/flash/oam.cfg
/flash/service.cfg
0 to be updated (but are newer) on card 2
0 to be deleted on card 2
Are you sure? [Yes|No]:
You must confirm the synchronization before it will be initiated.
If “No files to update” appears, you are returned to the CLI prompt.
If “No files to update” appears, you are returned to the CLI prompt.