Cisco Cisco ASR 5000
Exec Mode Commands (D-S)
gtpp interim now ▀
Command Line Interface Reference, StarOS Release 18 ▄
4103
ggsn-address
ggsn_ip_addr
Specifies the IP address of the interface to the GGSN using IPv4 dotted-decimal notation. This keyword is
specific to the GGSN.
specific to the GGSN.
ggsn-service
svc_name
Initiates GTPP interim accounting for all PDP contexts currently being facilitated by the GGSN service
specified as an alphanumeric string of 1 through 63 characters that is case sensitive. This keyword is specific
to the GGSN.
specified as an alphanumeric string of 1 through 63 characters that is case sensitive. This keyword is specific
to the GGSN.
gprs-service
svc_name
Initiates GTPP interim accounting for all PDP contexts currently being facilitated by an existing GPRS
service specified as an alphanumeric string of 1 through 63 characters that is case sensitive. This keyword is
specific to the SGSN.
service specified as an alphanumeric string of 1 through 63 characters that is case sensitive. This keyword is
specific to the SGSN.
imsi
imsi
[ ip-address
sub_address
[ username
name
] | nsapi
nsapi
[ ip-address
sub-address
[ username
name
] | username
name
] ]
Initiates GTPP interim accounting for a specific International Mobile Subscriber Identity (IMSI) number. The
request could be further filtered using any of the following keywords:
request could be further filtered using any of the following keywords:
ip-address
: Interim accounting will be performed for the IP address specified by
sub_address
. The
command can be further filtered by specifying a specific username with that address.
nsapi
: Interim accounting will be performed for a Network Service Access Point Identifier (NSAPI)
specified as an integer from 5 to 15. The command can be further filtered by specifying a specific ip
address and/or a username with that address, or just a specific username.
address and/or a username with that address, or just a specific username.
ip-address
sub_address
[ username
name
]
Initiates GTPP interim accounting for the IP address of the subscriber specified in IPv4 dotted-decimal
notation.
The command can be further filtered by specifying a username with that address. The name is the
subscriber’s name and can be a sequence of characters and/or wildcard characters ('$' and '*') from 1 to 127
characters. The * wildcard matches multiple characters and the $ wildcard matches a single character. If you
do not want the wildcard characters interpreted as wildcard enclose them in single quotes ( ‘). For example;
‘$’.
notation.
The command can be further filtered by specifying a username with that address. The name is the
subscriber’s name and can be a sequence of characters and/or wildcard characters ('$' and '*') from 1 to 127
characters. The * wildcard matches multiple characters and the $ wildcard matches a single character. If you
do not want the wildcard characters interpreted as wildcard enclose them in single quotes ( ‘). For example;
‘$’.
ip-pool
pool_name
Initiates GTPP interim accounting for all PDP contexts that were allocated IP addresses from an existing pool
specified as an alphanumeric string of 1 through 31 characters that is case sensitive. This keyword is
applicable to the GGSN only.
specified as an alphanumeric string of 1 through 31 characters that is case sensitive. This keyword is
applicable to the GGSN only.
mcc
mcc_number
mnc
mnc_number
mcc_number
: Specifies the mobile country code (MCC) portion of the PLMN identifier and can be
configured to any 3-digit integer value between 100 and 999.
mnc_number
: Specifies the mobile network code (MNC) portion of the PLMN identifier and can be
configured to any 2- or 3-digit integer between 00 and 999.
msisdn
msisdn_num
Configures the SGSN to include the Mobile Subscribers Integrated Services Digital Network identifier in
generated CDRs (M-CDRs and/or the S-CDRs). This keyword is applicable for SGSN only.
generated CDRs (M-CDRs and/or the S-CDRs). This keyword is applicable for SGSN only.