Cisco Cisco ASR 5000
Exec Mode show Commands (D-G)
show dhcpv6 ▀
Command Line Interface Reference, StarOS Release 18 ▄
4543
statistics [ dhcp-service
svc_name
Displays DHCPv6 statistics for either a specific or for all DHCPv6 services.
dhcp-service
svc_name
: Displays statistics for a DHCPv6 service specified as an alphanumeric string of
1 through 63 characters that is case sensitive.
server
server_address
: Displays statistics for a DHCPv6 server specified by its IP address in IPv6
colon-separated-hexadecimal notation.
Important:
In StarOS 15.0 and later releases, this option is deprecated
status [ dhcp-service
svc_name
Displays configuration information for either a specific or for all DHCPv6 services and servers configured.
dhcp-service
svc_name
: Displays statistics for a DHCPv6 service specified as an alphanumeric string of
1 through 63 characters that is case sensitive.
server
server_address
: Displays statistics for a DHCPv6 server specified by its IP address in IPv6
colon-separated-hexadecimal notation.
Important:
In StarOS 15.0 and later releases, this option is deprecated
| { grep
grep_options
| more }
Pipes (sends) the output of this command to a specified command. You must specify a command to which the
output of this command will be sent.
For details on the usage of
output of this command will be sent.
For details on the usage of
grep
and
more
, refer to the Regulating a Command’s Output section of the
Command Line Interface Overview chapter in the Command Line Interface Reference.
Usage
Counters pertaining to DHCP IPv6 functionality can be displayed as cumulative values or for specific APNs,
PDP contexts or DHCPv6 services.
PDP contexts or DHCPv6 services.
Example
The following command displays DHCPv6 status information for a DHCPv6 service called
DHCPv6-Gi
:
show dhcpv6 status service DHCPv6-Gi
Important:
Output descriptions for commands are available in the Statistics and Counters Reference.