Cisco Cisco ASR 5000
Exec Mode show Commands (H-L)
show hsgw-service ▀
Command Line Interface Reference, StarOS Release 18 ▄
4655
show hsgw-service
Displays information for HRPD Serving Gateway (HSGW) services on this system.
Product
HSGW
Privilege
Inspector
Mode
Exec
The following prompt is displayed in the Exec mode:
[local]host_name#
Syntax
show hsgw-service { all | name service_name | statistics { all | name service _name } } [
dns-stats | pcf-status [ address IPv4_address | filter { all | icmp-monitored | no-calls
| summary | up } ] ] [ | { grep grep_options | more } ]
dns-stats | pcf-status [ address IPv4_address | filter { all | icmp-monitored | no-calls
| summary | up } ] ] [ | { grep grep_options | more } ]
all
Displays configuration information for all HSGW services configured on this system.
name service_name
Displays configuration information for an existing HSGW service specified as an alphanumeric string of 1
through 63 characters.
through 63 characters.
statistics
Displays node-level statistics for the HSGW.
dns-stats
Displays information related to DNS P-GW selection for load balancing using DNS SRV lookup.
pcf-status
Displays information about the status of Packet Control Functions (PCFs) being monitored.
address IPv4_address
Displays status information for the specified PCF.
IPv4_address
must be specified using IPv4 dotted-decimal notation.
filter { all | icmp-monitored | no-calls | summary | up }
Filters the PCF status information. Must be followed by the filter to be applied.
all
: Shows all the PCFs.
icmp-monitored
: Shows only PCFs which are ICMP monitored.
no-calls
: Shows only PCFs which has no active sessions.
summary
: Shows only a summary of the status of the PCFs.