Cisco Cisco ASR 5000
Firewall-and-NAT Access Ruledef Configuration Mode Commands
▀ ip protocol
▄ Command Line Interface Reference, StarOS Release 18
5168
<=
: Less than or equals
>=
: Greater than or equals
protocol_assignment
: Specifies the protocol by assignment number.
protocol_assignment
must be an integer from 0 through 255 (for example, 1 for ICMP, 6 for TCP, and
17 for UDP).
Usage
Use this command to specify an access ruledef to analyze user traffic based on the IP protocol.
Example
The following command creates IP ruledef for analyzing user traffic using a protocol assignment of
1
:
ip protocol = 1