Cisco Cisco ASR 5000
GGSN Service Configuration Mode Commands
▀ sgsn multiple-address-group
▄ Command Line Interface Reference, StarOS Release 18
5278
mnc
mnc_code
Specifies the mobile network code (MNC) portion of the PLMN’s identifier.
mnc_code
is the PLMN MNC identifier configured as a 2- or 3-digit integer from 00 through 999.
rat-type { GAN | GERAN | HSPA | UTRAN | WLAN }
This keyword configures the type of radio access technology.
GAN
: Specifies the Generic Access Network type of Radio Access Technology (RAT).
GERAN
: Specifies the GSM EDGE Radio Access Network type of RAT.
HSPA
: Specifies the High Speed Packet Access type of RAT.
UTRAN
: Specifies the UMTS Terrestrial Radio Access Network type of RAT.
WLAN
: Specifies the Wireless Local Access Network type of RAT.
description
description
Add a description field to the SGSN multiple address group entry in the GGSN service configuration.
description
must be an alphameric string of 1 through 63 characters.
Usage
Use this command to configure a list of SGSN multiple address groups with which the GGSN service is to
communicate. This command can be entered multiple times to configure multiple SGSN multiple address
groups.
communicate. This command can be entered multiple times to configure multiple SGSN multiple address
groups.
Important:
The GGSN only communicates with the SGSN multiple address groups configured using this
command unless a plmn-policy is enabled to allow communication with unconfigured SGSNs. PLMN policies are
configured using the
configured using the
plmn unlisted-sgsn
command.
Example
The following command configures the GGSN to communicate with an SGSN with multiple address that is
defined by an SGSN multiple address group named
defined by an SGSN multiple address group named
sgsngrp1
that is on a foreign PLMN:
sgsn multiple-address-group sgsngrp1 plmn-foreign