Cisco Cisco ASR 5000
Global Configuration Mode Commands (A-K)
aaa domain-matching imsi-prefix ▀
Command Line Interface Reference, StarOS Release 18 ▄
5285
aaa domain-matching imsi-prefix
Enables domain lookup for session based on the International Mobile Subscriber Identity (IMSI) prefix length. Default:
Disabled
Disabled
Important:
This command is only available in 8.3 and later releases.
Product
All
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration
configure
Entering the above command sequence results in the following prompt:
[local]host_name(config)#
Syntax
aaa domain-matching imsi-prefix prefix-length prefix_length
no aaa domain-matching imsi-prefix
default aaa domain-matching
no
Specifies the system must not consider imsi-prefix domain matching method.
prefix-length
Specifies the IMSI length to be matched with the domain.
prefix_length
must be an integer from 1 through 15.
Usage
Use this command to configure the IMSI-prefix method of domain matching. This command enables domain
lookup for the session based on the IMSI prefix length. If there is a domain configured with the matching
IMSI prefix, the associated configuration is used.
This feature does not support partial matches.
lookup for the session based on the IMSI prefix length. If there is a domain configured with the matching
IMSI prefix, the associated configuration is used.
This feature does not support partial matches.
Example
The following command configures the IMSI prefix method for domain matching setting the prefix length to
10
.
aaa domain-matching imsi-prefix prefix-length 10