Cisco Cisco ASR 5000
Global Configuration Mode Commands (T-threshold phspc)
▀ terminal
▄ Command Line Interface Reference, StarOS Release 18
5592
odd
- Enables error checking by setting the parity bit to 1 (if needed) making the number of 1s in the data bits
odd.
speed { 115200 | 19200 | 38400 | 57600 | 9600 }
Specifies the flow of data in bits per second between the console port and terminal.
Default:
Default:
9600
stopbits { 1 | 2 }
Specifies the number of stop bits between each transmitted character.
Default:
Default:
1
1
: Use one stop bit between each transmitted character.
2
: Use two stop bits between each transmitted character.
Usage
Sets the SPIO’s console port parameters for communication with the terminal device.
Example
The following command sets the SPIO’s console port. The terminal must support these values.
terminal carrierdetect off databits 7 flowcontrol hardware on parity even
speed 115200 stopbits 1
speed 115200 stopbits 1