Cisco Cisco ASR 5000
GPRS Service Configuration Mode Commands
▀ associate
▄ Command Line Interface Reference, StarOS Release 18
6018
Important:
Only one MAP service can be associated with a GPRS service. The MAP service should be
configured prior to issuing this command.
network-global-mme-id-mgmt-db
Associates the configured global MME ID management database with the GPRS service. This enables
operators to associate a single custom list of MME Group IDs for use in GPRS to E-UTRAN handovers on
the S4-SGSN. The global MME ID management database is configured in the LTE Policy Configuration
Mode using the network-global-mme-id-mgmt-db command.
This command is available only if the SGSN S4 Interface license is enabled on the SGSN.
operators to associate a single custom list of MME Group IDs for use in GPRS to E-UTRAN handovers on
the S4-SGSN. The global MME ID management database is configured in the LTE Policy Configuration
Mode using the network-global-mme-id-mgmt-db command.
This command is available only if the SGSN S4 Interface license is enabled on the SGSN.
sgtp-service sgtp_svc_name
Associates an SGTP service with this GPRS service.
sgtp_svc_name
specifies the name for a configured SGTP service to associate with the GPRS service. Enter
an alphanumeric string of 1 to 63 characters.
The SGSN GPRS Tunneling Protocol (SGTP) service manages the configuration of the GTP-C and GTP-U
related parameters. For more information on the SGTP service, refer to the sgtp-service command in the
Context Configuration Mode Commands chapter and/or the SGTP Service Configuration Mode Commands
chapter.
The SGSN GPRS Tunneling Protocol (SGTP) service manages the configuration of the GTP-C and GTP-U
related parameters. For more information on the SGTP service, refer to the sgtp-service command in the
Context Configuration Mode Commands chapter and/or the SGTP Service Configuration Mode Commands
chapter.
Important:
Only one SGTP service can be associated with a GPRS service. The SGTP service should be
configured prior to issuing this command. When co-locating an SGSN and MME, the GPRS Service cannot be
associated with the same SGTP service that is used by the MME.
associated with the same SGTP service that is used by the MME.
tai-mgmt-db database_name
Associates this GPRS service with a pre-configured TAI Management Database.
database_name
specifies the name of a pre-configured TAI Management Database to associate with the
SGSN service as alphanumeric string of 1 through 64 characters. For more information on subscriber maps,
refer to the tai-mgmt-db command in the LTE Policy Configuration Mode Commands chapter and the LTE
TAI Management Database Configuration Mode Commands chapter.
This command is available only if the SGSN S4 Interface license is enabled on the SGSN.
refer to the tai-mgmt-db command in the LTE Policy Configuration Mode Commands chapter and the LTE
TAI Management Database Configuration Mode Commands chapter.
This command is available only if the SGSN S4 Interface license is enabled on the SGSN.
Usage
Use this command to associate a pre-configured service and/or DSCP marking template and/or management
database with this GPRS service. The command can be repeated as necessary to configure associations for all
desired services/templates/databases.
database with this GPRS service. The command can be repeated as necessary to configure associations for all
desired services/templates/databases.
Caution:
This is a critical configuration. The GPRS service cannot be started without this configuration. Any
change to this configuration would lead to restarting the GPRS service. Removing or disabling this configuration will
stop the GPRS service.
stop the GPRS service.
Example
The following command associates a previously-configured eGTP service called
egtp1
in the
dst_ctx
context to this GPRS service:
associate egtp-service egtp1 context dst_ctx