Cisco Cisco ASR 5000
GTPC Overload Control Profile Configuration Mode Commands
▀ overload-control-handling
▄ Command Line Interface Reference, StarOS Release 18
6136
overload-control-handling
Enables/disables the handling of GTP-C overload control information for the node.
Important:
GTP-C Overload Control Profile is a license-controlled feature. For more information, contact your
Cisco account or support representative.
Product
P-GW
SAEGW
S-GW
Privilege
Administrator, Security Administrator
Mode
Exec > Global Configuration > GTPC Overload Control Profile Configuration
configure > gtpc-overload-control-profile profile_name
Entering the above command sequence results in the following prompt:
[local]host_name(config-gtpc-overload-control-profile)#
Syntax
[ no } overload-control-handling { home | visited }
no
Disables overload control information handling for this node.
overload-control-handling
Enables the handling of overload control information.
home
Specifies that the handling of overload control information will be enabled for the home PLMN.
visited
Specifies that the handling of overload control information will be enabled for the visited PLMN.
Usage
Use this command to enable/disable the handling of overload control information for this node.
The Load Control Profile must be associated with a P-GW, S-GW, or SAEGW service using one of the
following commands:
The Load Control Profile must be associated with a P-GW, S-GW, or SAEGW service using one of the
following commands:
P-GW:
associate
command in P-GW Service Configuration Mode
S-GW:
associate
command in S-GW Service Configuration Mode