Cisco Cisco ASR 5000
GTPC Overload Control Profile Configuration Mode Commands
▀ validity-period
▄ Command Line Interface Reference, StarOS Release 18
6142
validity-period
Configures the time, in seconds, that specifies how long the overload control information is valid.
Important:
GTP-C Overload Control Profile is a license-controlled feature. For more information, contact your
Cisco account or support representative.
Product
P-GW
SAEGW
S-GW
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > GTPC Overload Control Profile Configuration
configure > gtpc-overload-control-profile profile_name
Entering the above command sequence results in the following prompt:
[local]host_name(config-gtpc-overload-control-profile)#
Syntax
validity-period seconds
default validity-period
validity-period seconds
Specifies the length of time during which the overload condition specified by the OCI IE is to be considered
as valid, unless overridden by subsequent new overload control information.
as valid, unless overridden by subsequent new overload control information.
seconds
must be an integer from from 1 to 3600.
Default: 600
Usage
Use this command to configure how long the overload control profile information is valid.
If no validity-period is configured, the system will use the default setting.
The Overload Control profile must be associated with a P-GW, S-GW, or SAEGW service using one of the
following commands:
If no validity-period is configured, the system will use the default setting.
The Overload Control profile must be associated with a P-GW, S-GW, or SAEGW service using one of the
following commands:
P-GW:
associate
command in P-GW Service Configuration Mode
S-GW:
associate
command in S-GW Service Configuration Mode
SAEGW:
associate
commands in both P-GW and S-GW Service Configuration modes
Example
The following example configures the validity-period to 700 seconds:
validity-period 700