Cisco Cisco ASR 5000
HNB-CS Network Configuration Mode Commands
▀ ranap reset
▄ Command Line Interface Reference, StarOS Release 18
6426
max-retransmission retries
Sets the maximum number of retires allowed for transmission of RESET-ACK message to MSC. This is used
during RANAP RESET procedure in HNB-CS Network configuration instance.
during RANAP RESET procedure in HNB-CS Network configuration instance.
retries
is an integer value from 0 through 2. When 0 is used retransmission is disabled. Default: 1
use-actual-plmn
Actual PLMN will be sent in RANAP Reset/Reset Resource. By default, Common PLMN will be sent.
Usage
Use this command to configure the RANAP RESET procedure related parameters in HNB-CS Network
configuration for multiple HNB-GW service support.
configuration for multiple HNB-GW service support.
Example
The following command configures the HNB-GW initiated RANAP RESET Procedure for an HNB-CS
Network configuration instance:
Network configuration instance:
ranap reset hnbgw-initiated