Cisco Cisco ASR 5000
LTE Paging Map Configuration Mode Commands
▀ precedence
▄ Command Line Interface Reference, StarOS Release 18
7140
If the MME receives another paging trigger (for example from the MSC for CSFB) while paging is already in
progress, the MME checks whether a higher precedence paging profile can be applied. If the new trigger has
a paging-map entry with a higher precedence, the MME restarts the paging process using the paging-profile
associated with the new map entry.
Paging is typically triggered when either the MSC indicates that there is an incoming call to the UE (Call
Service, CS), or when the S-GW sends a Downlink Data Notification (Packet Service, PS) to the MME, or
when there is a bearer/PDN request coming from the P-GW/S-GW.
Refer to the Heuristic and Intelligent Paging chapter in the MME Administration Guide for more information.
progress, the MME checks whether a higher precedence paging profile can be applied. If the new trigger has
a paging-map entry with a higher precedence, the MME restarts the paging process using the paging-profile
associated with the new map entry.
Paging is typically triggered when either the MSC indicates that there is an incoming call to the UE (Call
Service, CS), or when the S-GW sends a Downlink Data Notification (Packet Service, PS) to the MME, or
when there is a bearer/PDN request coming from the P-GW/S-GW.
Refer to the Heuristic and Intelligent Paging chapter in the MME Administration Guide for more information.
Related Commands
Refer to the
paging-profile
command in the LTE Policy Configuration Commands chapter to create the paging
profiles used in this command.
Example
The following example specifies a special paging-profile for IMS-Voice and a default paging-profile for the
rest of PS paging triggers:
rest of PS paging triggers:
precedence 1 traffic-type ps qci 1 paging-profile profile-voice
precedence 2 traffic-type ps paging-profile profile-default
In the following example, Mobile Terminated voice triggered paging requests will use profile-voice. All other
CS traffic types like MM-InformationRequest and MT-SMS use profile-cs:
CS traffic types like MM-InformationRequest and MT-SMS use profile-cs:
precedence 1 traffic-type cs voice paging-profile profile-voice
precedence 2 traffic-type cs paging-profile profile-cs
In the following example, signaling paging requests due to a node restoration (P-GW Restart Notification
(PRN)) will use the prnpaging map, and is assigned a lower precedence of 3:
(PRN)) will use the prnpaging map, and is assigned a lower precedence of 3:
precedence 3 traffic-type signaling node-restoration paging-profile prn