Cisco Cisco ASR 5000

Page of 9109
  SGSN Global Configuration Mode Commands 
old-tlli invalidate tlli  ▀   
 
Command Line Interface Reference, StarOS Release 18  ▄  
 
   
8565 
old-tlli invalidate tlli 
This command configures a list of random TLLI to be invalidated (removed) from the GMM after the invalidate old-
TLLI timer expires. 
Product
 
SGSN 
Privilege
 
Security Administrator, Administrator 
Mode
 
Exec > Global Configuration > SGSN Global Configuration 
configure > sgsn-global
 
Entering the above command sequence results in the following prompt: 
[local]host_name(config-sgsn-global)# 
Syntax
 
[ no ] old-tlli invalidate tlli < hexadecimal > 
no
 
Removes a single random TLLI from the configured list. 
< hexadecimal >
 
Identifies a single random TLLI to be removed from the GMM after the old-TLLI timer expires.  
Usage 
Use this command to create a list of up to 50 random TLLI to be dropped from the GMM after the old-TLLI 
timer expires. This command also starts the invalidate old-TLLI timer. 
Important:
  If the old-TLLI expiry timer is not configured with the 
old-tlli hold-time
 command, then the 
SGSN will only drop second Attach Requests using the same random TLLI already in use. 
Related Commands
 
The 
gmm-message 
configures the SGSN to discard (drop) the Attach-Request message received with a 
random TLLI already in use 
 
The
 old-tlli hold-time 
command configures the old-TLLI expiry timer. 
Example
 
Add random TLLI 
0x7f05a30a
 to the Invalidate List:  
 old-tlli invalidate tlli 0x7f05a30a