Cisco Cisco ASR 5000
APN Configuration Mode Commands
▀ p-cscf
▄ Command Line Interface Reference, StarOS Release 18
1426
priority address_ priority [ ip IPv4_address | ipv6 IPv6_address ]
Specifies the priority for P-CSCF address for the APN.
address_ priority
is an integer from 1 to 3. 1 is the highest priority.
IPv4_address
must be expressed in IPv4 dotted-decimal notation.
IPv6_address
must be expressed in IPv6 colon-separated-hexadecimal notation.
Usage
Use this command to specify the P-CSCF addresses or FQDN server name associated with this APN.
Example
The following command enables a P-CSCF with the primary IPv4 address
10.2.3.4
for the APN:
p-cscf primary ip 10.2.3.4
The following command enables a P-CSCF with FQDN server name
pcscfalias1.ind.pun.cisco.com
for the APN:
p-cscf fqdn pcscfalias1.ind.pun.cisco.com
The following command enables a P-CSCF with the IPv4 address
10.2.3.4
at the highest priority of 1 for
the APN:
p-cscf priority 1 ip 10.2.3.4