Cisco Cisco ASR 5000
AAA Server Group Configuration Mode Commands
▀ radius accounting rp
▄ Command Line Interface Reference, StarOS Release 18
182
radius accounting rp
This command configures the RADIUS accounting R-P originated call options.
Product
PDSN
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > Context Configuration > AAA Server Group Configuration
configure > context context_name > aaa group group_name
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-aaa-group)#
Syntax
radius accounting rp { handoff-stop { immediate | wait-active-stop } | tod minute hour |
trigger-event { active-handoff | active-start-param-change | active-stop } | trigger-
policy { airlink-usage [ counter-rollover ] | custom [ active-handoff | active-start-
param-change | active-stop ] | standard } | trigger-stop-start }
trigger-event { active-handoff | active-start-param-change | active-stop } | trigger-
policy { airlink-usage [ counter-rollover ] | custom [ active-handoff | active-start-
param-change | active-stop ] | standard } | trigger-stop-start }
no radius accounting rp { tod minute hour | trigger-event { active-handoff | active-
start-param-change | active-stop } | trigger-stop-start }
start-param-change | active-stop } | trigger-stop-start }
default radius accounting rp { handoff-stop | trigger-policy }
no
Removes the specified configuration.
default
Sets the default configuration for the specified keyword.
handoff-stop { immediate | wait-active-stop }
Specifies the behavior of generating accounting STOP when handoff occurs.
immediate
: Indicates that accounting STOP should be generated immediately on handoff, i.e. not to
wait active-stop from the old PCF.
wait-active-stop
: Indicates that accounting STOP is generated only when active-stop received
from the old PCF when handoff occurs.
Default:
wait-active-stop
tod minute hour
Specifies the time of day a RADIUS event is to be generated for accounting. Up to four different times of the
day may be specified through individual commands.
day may be specified through individual commands.
minute
must be an integer from 0 through 59.
hour
must be an integer from 0 through 23.