Cisco Cisco ASR 5000
AAA Server Group Configuration Mode Commands
radius accounting server ▀
Command Line Interface Reference, StarOS Release 18 ▄
187
acct-off { disable | enable }
Disables and enables the sending of the Accounting-Off message when a RADIUS server is removed from
the configuration.
The Accounting-Off message is sent when a RADIUS server is removed from the configuration, or when
there is an orderly shutdown. However, if for some reason the Accounting-On message cannot be sent at this
time, it is never sent. The Accounting-Off message is sent only once, regardless of how many accounting
retries are enabled.
Default: enable
the configuration.
The Accounting-Off message is sent when a RADIUS server is removed from the configuration, or when
there is an orderly shutdown. However, if for some reason the Accounting-On message cannot be sent at this
time, it is never sent. The Accounting-Off message is sent only once, regardless of how many accounting
retries are enabled.
Default: enable
max max_messages
Specifies the maximum number of outstanding messages that may be allowed to the server.
max_messages
must be an integer from 0 through 4000.
Default: 0
max-rate max_value
Specifies the rate at which the accounting messages should be sent to the RADIUS server by a single AAA
manager task.
manager task.
max_value
must be an integer from 0 through 1000.
Default: 0 (disabled)
oldports
Sets the UDP communication port to the out of date standardized default for RADIUS communications to
1646.
1646.
priority priority
Specifies the relative priority of this accounting server. The priority is used in server selection for
determining which server to send accounting data to.
determining which server to send accounting data to.
priority
must be an integer from 1 through 1000, where 1 is the highest priority. When configuring two or
more servers with the same priority you will be asked to confirm that you want to do this. If you use the
-
noconfirm
option, you are not asked for confirmation and multiple servers could be assigned the same
priority.
Default: 1000
Default: 1000
type { mediation-device | standard }
mediation-device
: Obsolete keyword.
Specifies the type of AAA transactions to use to communicate with this RADIUS server.
standard
: Use standard AAA transactions.
Default:
standard
admin-status { disable | enable }
Configures the admin-status for the RADIUS accounting server.
enable
: Enables the RADIUS accounting server.
disable
: Disables the RADIUS accounting server.
-noconfirm
Specifies that the command must execute without any prompts and confirmation from the user.