Cisco Cisco ASR 5700 Manual

Page of 8994
 
Command Line Interface Reference, StarOS 
Release 17 
Last Updated October 15, 2015 
 
Americas Headquarters 
Cisco Systems, Inc. 
170 West Tasman Drive 
San Jose, CA 95134-1706  
USA 
http://www.cisco.com 
Tel:   408 526-4000 
 
800 553-NETS (6387) 
Fax:   408 527-0883 
 

Summary of Contents of manual for Cisco Cisco ASR 5700

  • Page 1: Front CoverCommand Line Interface Reference, StarOS Release 17 Last Updated October 15, 2015 Americas Headquarters Cisco Systems, Inc. 170 West Tasman...
  • Page 2THE SPECIFICATIONS AND INFORMATION REGARDING THE PRODUCTS IN THIS MANUAL ARE SUBJECT TO CHANGE WITHOUT NOTICE. ALL STATEMENTS, INFORMATION, AND...
  • Page 3: ContentsCONTENTS About this Guide ........................................................................................... cxvii Conventions Used .............................................................................................................................. cxviii CLI Command Sections ........................................................................................................................ cxix Supported Documents and Resources ....................................................................................................
  • Page 4▀ Contents Platform Related CLI Issues ................................................................................................................. 144 IP Address Notation .............................................................................................................................. 145 IPv4 Dotted-Decimal Notation .......................................................................................................... 145 IPv6 Colon-Separated-Hexadecimal...
  • Page 5 Contents ▀ Accounting Policy Configuration Mode Commands .................................. 227 accounting-event-trigger ....................................................................................................................... 228 accounting-keys .................................................................................................................................... 230 accounting-level .................................................................................................................................... 231 accounting-mode...
  • Page 6▀ Contents redirect nexthop (by host IP address) ................................................................................................... 362 redirect nexthop (by source ICMP packets) ......................................................................................... 365 redirect nexthop...
  • Page 7 Contents ▀ content-filtering category match-method .............................................................................................. 454 content-filtering category policy-id ........................................................................................................ 455 credit-control ......................................................................................................................................... 457 diameter credit-control .......................................................................................................................... 459...
  • Page 8▀ Contents policy-control charging-action-override ................................................................................................. 552 policy-control charging-rule-base-name ............................................................................................... 553 policy-control dynamic-rule-limit ........................................................................................................... 555 policy-control retransmissions-counted ................................................................................................ 556 policy-control update-default-bearer...
  • Page 9 Contents ▀ ACS Port Map Configuration Mode Commands .......................................... 623 end ........................................................................................................................................................ 624 exit ........................................................................................................................................................ 625 port........................................................................................................................................................ 626 ACS...
  • Page 10▀ Contents firewall icmp-destination-unreachable-message-threshold .................................................................. 701 firewall max-ip-packet-size ................................................................................................................... 703 firewall mime-flood ................................................................................................................................ 705 firewall no-ruledef-matches................................................................................................................... 707 firewall policy ...........................................................................................................................................
  • Page 11 Contents ▀ wtp packets-out-of-order....................................................................................................................... 789 xheader-encryption ............................................................................................................................... 791 ACS Ruledef Configuration Mode Commands ............................................ 793 bearer 3gpp apn ......................................................................................................................................
  • Page 12▀ Contents ftp url ..................................................................................................................................................... 861 ftp user .................................................................................................................................................. 863 http any-match ...................................................................................................................................... 865 http attribute-in-data .............................................................................................................................. 866 http attribute-in-url...
  • Page 13 Contents ▀ imap subject ......................................................................................................................................... 945 imap to .................................................................................................................................................. 947 ip any-match ......................................................................................................................................... 949 ip dscp .................................................................................................................................................. 950 ip...
  • Page 14▀ Contents pptp ctrl-msg-type ............................................................................................................................... 1035 pptp gre any-match ............................................................................................................................. 1037 radius any-match ................................................................................................................................ 1038 radius error.......................................................................................................................................... 1039 radius state...
  • Page 15 Contents ▀ sip state .............................................................................................................................................. 1109 sip to ................................................................................................................................................... 1110 sip uri .................................................................................................................................................. 1112 smtp any-match .................................................................................................................................. 1114 smtp...
  • Page 16▀ Contents wsp pdu-length ................................................................................................................................... 1191 wsp pdu-type ...................................................................................................................................... 1192 wsp previous-state .............................................................................................................................. 1194 wsp reply code .................................................................................................................................... 1195 wsp...
  • Page 17 Contents ▀ associate............................................................................................................................................. 1264 end ...................................................................................................................................................... 1265 exit ...................................................................................................................................................... 1266 maximum reset-retransmission .......................................................................................................... 1267 self-point-code .................................................................................................................................... 1268 timeout alcap...
  • Page 18▀ Contents ignore-alt-config .................................................................................................................................. 1352 ikev2 tsr............................................................................................................................................... 1353 ims-auth-service ................................................................................................................................. 1354 ip access-group .................................................................................................................................. 1355 ip address alloc-method...................................................................................................................... 1357 ip...
  • Page 19 Contents ▀ qos rate-limit ....................................................................................................................................... 1433 qos-renegotiate ................................................................................................................................... 1436 qos traffic-police ................................................................................................................................. 1437 radius .................................................................................................................................................. 1438 radius group ...........................................................................................................................................
  • Page 20▀ Contents mobility-protocol .................................................................................................................................. 1515 ntsr ...................................................................................................................................................... 1516 overcharge-protection ......................................................................................................................... 1518 pdp-data-inactivity ............................................................................................................................... 1520 pdp-type-ipv4v6-override .................................................................................................................... 1522 pgw-address ....................................................................................................................................... 1523...
  • Page 21 Contents ▀ echo .................................................................................................................................................... 1604 end ...................................................................................................................................................... 1605 exit ...................................................................................................................................................... 1606 slow-timers.......................................................................................................................................... 1607 BGP Address-Family (IPv4/IPv6) Configuration Mode Commands............
  • Page 22▀ Contents exit ...................................................................................................................................................... 1675 mode ................................................................................................................................................... 1676 preferred slot ....................................................................................................................................... 1677 recover ................................................................................................................................................ 1678 shutdown............................................................................................................................................. 1680 snmp trap link-status..............................................................................................................................
  • Page 23 Contents ▀ gtpu schema ....................................................................................................................................... 1751 ha schema .......................................................................................................................................... 1753 header................................................................................................................................................. 1755 hnbgw-hnbap schema ........................................................................................................................ 1757 hnbgw-hnbap-access-closed schema ...................................................................................................
  • Page 24▀ Contents rp schema ........................................................................................................................................... 1851 saegw schema .................................................................................................................................... 1853 sample-interval ................................................................................................................................... 1854 sbc schema ......................................................................................................................................... 1855 sccp schema ..........................................................................................................................................
  • Page 25 Contents ▀ egtp ..................................................................................................................................................... 1945 eir-profile ............................................................................................................................................. 1946 encryption-algorithm-lte ...................................................................................................................... 1947 encryption-algorithm-umts .................................................................................................................. 1948 end ...................................................................................................................................................... 1949 equivalent-plmn .....................................................................................................................................
  • Page 26▀ Contents pdp-activate allow ............................................................................................................................... 2029 pdp-activate restrict ............................................................................................................................ 2030 pdn-type-override ................................................................................................................................ 2032 peer-mme............................................................................................................................................ 2034 peer-msc ............................................................................................................................................. 2036 peer-nri-length .......................................................................................................................................
  • Page 27 Contents ▀ site-id .................................................................................................................................................. 2117 street-address ..................................................................................................................................... 2118 Call-Home Profile Configuration Mode ....................................................... 2119 active .................................................................................................................................................. 2120 destination .............................................................................................................................................
  • Page 28▀ Contents preferred slot ....................................................................................................................................... 2186 pwe3-cesopsn ..................................................................................................................................... 2187 shutdown............................................................................................................................................. 2188 snmp trap link-status........................................................................................................................... 2189 threshold high-activity ......................................................................................................................... 2190 threshold...
  • Page 29 Contents ▀ ca-certificate-name ............................................................................................................................. 2249 end ...................................................................................................................................................... 2250 exit ...................................................................................................................................................... 2251 ha-chassis-mode ................................................................................................................................ 2252 ha-network-mode................................................................................................................................ 2253 rri-mode .............................................................................................................................................. 2254...
  • Page 30▀ Contents camel-service ...................................................................................................................................... 2325 cbs-service .......................................................................................................................................... 2326 cipher-suite ......................................................................................................................................... 2327 class-map............................................................................................................................................ 2328 closedrp-rp handoff ............................................................................................................................. 2330 config-administrator ............................................................................................................................ 2331...
  • Page 31 Contents ▀ exit ...................................................................................................................................................... 2414 external-inline-server .......................................................................................................................... 2415 fa-service ............................................................................................................................................ 2416 firewall max-associations.................................................................................................................... 2418 fng-service .......................................................................................................................................... 2419 ggsn-service ..........................................................................................................................................
  • Page 32▀ Contents ims-sh-service ..................................................................................................................................... 2507 inspector ............................................................................................................................................. 2508 interface .............................................................................................................................................. 2511 ip access-group .................................................................................................................................. 2513 ip access-list ....................................................................................................................................... 2515 ip...
  • Page 33 Contents ▀ lma-service ......................................................................................................................................... 2596 lns-service........................................................................................................................................... 2598 location-service ................................................................................................................................... 2600 logging ................................................................................................................................................ 2602 mag-service ........................................................................................................................................ 2604 map-service ........................................................................................................................................ 2606...
  • Page 34▀ Contents radius algorithm .................................................................................................................................. 2688 radius allow ......................................................................................................................................... 2689 radius attribute .................................................................................................................................... 2690 radius authenticate null-username ..................................................................................................... 2692 radius...
  • Page 35 Contents ▀ threshold ip-pool-release .................................................................................................................... 2773 threshold ip-pool-used ........................................................................................................................ 2775 threshold monitoring ........................................................................................................................... 2777 threshold pdsn-service init-rrq-rcvd-rate............................................................................................. 2779 twan-profile...
  • Page 36▀ Contents trigger type .......................................................................................................................................... 2854 usage-reporting ................................................................................................................................... 2856 Crypto Group Configuration Mode Commands......................................... 2857 end ...................................................................................................................................................... 2858 exit .........................................................................................................................................................
  • Page 37 Contents ▀ payload ............................................................................................................................................... 2932 peer..................................................................................................................................................... 2934 remote-secret-list ................................................................................................................................ 2936 whitelist ............................................................................................................................................... 2937 Crypto Map IKEv2-IPv6 Payload Configuration Mode...
  • Page 38▀ Contents ocsp .................................................................................................................................................... 3010 payload ............................................................................................................................................... 3012 peer network ....................................................................................................................................... 3014 remote-secret-list ................................................................................................................................ 3015 timeout ................................................................................................................................................ 3016 whitelist ..................................................................................................................................................
  • Page 39 Contents ▀ exit ...................................................................................................................................................... 3073 ps-cs-alerting ...................................................................................................................................... 3074 CSCF Charging Configuration Mode Commands ..................................... 3075 end ...................................................................................................................................................... 3076 exclude...
  • Page 40▀ Contents bind ..................................................................................................................................................... 3130 end ...................................................................................................................................................... 3132 exit ...................................................................................................................................................... 3133 npdb-primary-server ........................................................................................................................... 3134 npdb-secondary-server ....................................................................................................................... 3135 timeout ................................................................................................................................................ 3136...
  • Page 41 Contents ▀ CSCF Prefix Table Configuration Mode Commands ................................. 3193 end ...................................................................................................................................................... 3194 exit ...................................................................................................................................................... 3195 number................................................................................................................................................ 3196 CSCF...
  • Page 42▀ Contents caller-preference ................................................................................................................................. 3264 charging .............................................................................................................................................. 3265 cnsa-media-profile .............................................................................................................................. 3266 core-service ........................................................................................................................................ 3268 custom cdf-selection ........................................................................................................................... 3269 custom reason-header-cause...
  • Page 43 Contents ▀ authentication ..................................................................................................................................... 3332 bgcf-proxy ........................................................................................................................................... 3335 diversion-info ...................................................................................................................................... 3336 end ...................................................................................................................................................... 3337 exit ...................................................................................................................................................... 3338 forking ....................................................................................................................................................
  • Page 44▀ Contents end ...................................................................................................................................................... 3394 exit ...................................................................................................................................................... 3395 route .................................................................................................................................................... 3396 CSCF Translation Configuration Mode Commands .................................. 3399 after ........................................................................................................................................................
  • Page 45 Contents ▀ lease-time ........................................................................................................................................... 3461 max-retransmissions .......................................................................................................................... 3462 retransmission-timeout ....................................................................................................................... 3463 T1-threshold ....................................................................................................................................... 3464 T2-threshold ....................................................................................................................................... 3465 DHCPv6 Client...
  • Page 46▀ Contents peer ..................................................................................................................................................... 3524 peer-backoff-timer............................................................................................................................... 3527 reconnect-timeout ............................................................................................................................... 3528 response-timeout ................................................................................................................................ 3529 rlf-template .......................................................................................................................................... 3530 route-entry........................................................................................................................................... 3532 route-failure ............................................................................................................................................
  • Page 47 Contents ▀ end ...................................................................................................................................................... 3592 exit ...................................................................................................................................................... 3593 max-retry............................................................................................................................................. 3594 mode ................................................................................................................................................... 3595 EAP Mode Configuration Mode Commands .................................................
  • Page 48▀ Contents vendor-specific-attr ............................................................................................................................. 3680 Ethernet Interface Configuration Mode Commands ................................. 3683 bfd ....................................................................................................................................................... 3684 crypto-map .......................................................................................................................................... 3686 description........................................................................................................................................... 3687...
  • Page 49 Contents ▀ Exec Mode Commands (A-C) ....................................................................... 3751 aaa test ............................................................................................................................................... 3752 abort.................................................................................................................................................... 3754 active-charging service ....................................................................................................................... 3755 alarm...
  • Page 50▀ Contents clear cli history .................................................................................................................................... 3822 clear cmp cert-name ........................................................................................................................... 3823 clear cmp statistics ............................................................................................................................. 3824 clear config.......................................................................................................................................... 3825...
  • Page 51 Contents ▀ clear l2tp ............................................................................................................................................. 3892 clear lawful-intercept ........................................................................................................................... 3894 clear llc statistics ................................................................................................................................. 3895 clear lma-service statistics.................................................................................................................. 3896...
  • Page 52▀ Contents clear sndcp statistics ........................................................................................................................... 3957 clear snmp trap ................................................................................................................................... 3958 clear srp .............................................................................................................................................. 3959 clear ss7-routing-domain .................................................................................................................... 3960...
  • Page 53 Contents ▀ diameter reset connection .................................................................................................................. 4045 diameter reset route failure................................................................................................................. 4046 directory .............................................................................................................................................. 4048 disable radius ..................................................................................................................................... 4050...
  • Page 54▀ Contents reset diameter ..................................................................................................................................... 4142 reset ims-authorization ....................................................................................................................... 4143 reveal disabled commands ................................................................................................................. 4144 rlogin ................................................................................................................................................... 4145 rmdir .......................................................................................................................................................
  • Page 55 Contents ▀ update module .................................................................................................................................... 4229 update qos policy map........................................................................................................................ 4230 update qos tft ...................................................................................................................................... 4232 upgrade............................................................................................................................................... 4233 upgrade...
  • Page 56▀ Contents show apn............................................................................................................................................. 4352 show apn counters ip-allocation ......................................................................................................... 4353 show apn statistics .............................................................................................................................. 4355 show apn-profile ................................................................................................................................. 4356...
  • Page 57 Contents ▀ show crash ......................................................................................................................................... 4441 show credit-control sessions .............................................................................................................. 4442 show credit-control statistics............................................................................................................... 4443 show crypto blacklist file...
  • Page 58▀ Contents show egtpc peers ................................................................................................................................ 4525 show egtpc sessions ........................................................................................................................... 4527 show egtpc statistics ........................................................................................................................... 4529 show egtp-service ..................................................................................................................................
  • Page 59 Contents ▀ show hnbgw statistics hnbid ............................................................................................................... 4604 show hnbgw-service ........................................................................................................................... 4606 show hsgw-service ............................................................................................................................. 4607 show hss-peer-service........................................................................................................................ 4609...
  • Page 60▀ Contents show linecard ...................................................................................................................................... 4681 show link-aggregation ......................................................................................................................... 4683 show linkmgr ....................................................................................................................................... 4685 show llc statistics ................................................................................................................................ 4686 show...
  • Page 61 Contents ▀ show pcc-af session ........................................................................................................................... 4772 show pcc-policy service ...................................................................................................................... 4774 show pcc-policy session ..................................................................................................................... 4776 show pcc-service...
  • Page 62▀ Contents show sccp statistics ............................................................................................................................ 4848 show sctp-param-template ................................................................................................................. 4850 show service all .................................................................................................................................. 4851 show session counters historical...
  • Page 63 Contents ▀ show threshold ................................................................................................................................... 4990 show timing ......................................................................................................................................... 4991 show upgrade ..................................................................................................................................... 4992 show url-blacklisting database............................................................................................................ 4993 show...
  • Page 64▀ Contents firewall icmp-fsm ................................................................................................................................. 5066 firewall ip-reassembly-failure .............................................................................................................. 5067 firewall malformed-packets ................................................................................................................. 5068 firewall max-ip-packet-size ................................................................................................................. 5069 firewall mime-flood...
  • Page 65 Contents ▀ FNG Service Configuration Mode Commands........................................... 5141 aaa aggregation .................................................................................................................................. 5142 aaa authentication .............................................................................................................................. 5144 bind ..................................................................................................................................................... 5145...
  • Page 66▀ Contents retransmission-timeout ....................................................................................................................... 5216 retransmission-timeout-ms ................................................................................................................. 5218 setup-timeout ...................................................................................................................................... 5220 sgsn address ...................................................................................................................................... 5221 sgsn define-multiple-address-group ................................................................................................... 5223 sgsn...
  • Page 67 Contents ▀ congestion-control threshold port-specific .......................................................................................... 5307 congestion-control threshold port-rx-utilization................................................................................... 5309 congestion-control threshold port-tx-utilization ................................................................................... 5311 congestion-control threshold service-control-cpu-utilization...
  • Page 68▀ Contents logging disable .................................................................................................................................... 5389 logging display .................................................................................................................................... 5390 logging filter......................................................................................................................................... 5391 logging monitor ................................................................................................................................... 5400 logging runtime ......................................................................................................................................
  • Page 69 Contents ▀ snmp authentication-failure-trap ......................................................................................................... 5478 snmp community ................................................................................................................................ 5479 snmp discard-snmpv3-pdu ................................................................................................................. 5481 snmp engine-id ................................................................................................................................... 5482 snmp...
  • Page 70▀ Contents threshold call-setup ............................................................................................................................. 5568 threshold call-setup-failure.................................................................................................................. 5570 threshold card-temperature-near-power-off-limit ................................................................................ 5572 threshold cdr-file-space ...................................................................................................................... 5573 threshold contfilt-block ...........................................................................................................................
  • Page 71 Contents ▀ threshold per-service-samog-sessions ............................................................................................... 5673 threshold per-service-pdsn-sessions .................................................................................................. 5675 threshold per-service-sgsn-pdp-sessions ........................................................................................... 5677 threshold per-service-sgsn-sessions .................................................................................................. 5679 threshold...
  • Page 72▀ Contents threshold poll cpu-orbs-warn interval .................................................................................................. 5751 threshold poll cpu-session-throughput interval ................................................................................... 5753 threshold poll cpu-utilization interval ................................................................................................... 5755...
  • Page 73 Contents ▀ threshold poll pdsn-init-rrq-rcvd-rate interval ...................................................................................... 5812 threshold poll pdsn-svc-init-rrq-rcvd-rate interval ............................................................................... 5813 threshold poll per-service-asngw-sessions interval ...............................................................................
  • Page 74▀ Contents threshold poll total-sgsn-sessions interval .......................................................................................... 5880 threshold poll total-sgw-sessions interval ........................................................................................... 5881 threshold poll total-subscriber interval ................................................................................................ 5883...
  • Page 75 Contents ▀ network-sharing .................................................................................................................................. 5984 nri ........................................................................................................................................................ 5986 paging-policy ...................................................................................................................................... 5989 peer-nsei ............................................................................................................................................. 5991 plmn .................................................................................................................................................... 5993 rai-skip-validation ...................................................................................................................................
  • Page 76▀ Contents nature-of-address ............................................................................................................................... 6053 numbering-plan ................................................................................................................................... 6054 translation-type ................................................................................................................................... 6055 GTPP Server Group Configuration Mode Commands .............................. 6057 end...
  • Page 77 Contents ▀ sequence-number............................................................................................................................... 6140 source-port ......................................................................................................................................... 6141 udp-checksum .................................................................................................................................... 6143 HA Proxy DNS Configuration Mode Commands ....................................... 6145 description...
  • Page 78▀ Contents directory .............................................................................................................................................. 6218 end ...................................................................................................................................................... 6219 exit ...................................................................................................................................................... 6220 file ....................................................................................................................................................... 6221 HeNB-GW Access Service Configuration Mode Commands...
  • Page 79 Contents ▀ retransmission-timeout ....................................................................................................................... 6284 rsvp ..................................................................................................................................................... 6285 setup-timeout ...................................................................................................................................... 6286 spi remote-address ............................................................................................................................. 6287 ue-initiated-qos ................................................................................................................................... 6289 unauthorized-flows...
  • Page 80▀ Contents common-plmn ..................................................................................................................................... 6358 end ...................................................................................................................................................... 6359 exit ...................................................................................................................................................... 6360 handin ................................................................................................................................................. 6361 hnb override-vsa location-based-service ............................................................................................ 6363 hnb-access-mode...
  • Page 81 Contents ▀ associate ps-network .......................................................................................................................... 6435 authorised-macro-lai ........................................................................................................................... 6436 end ...................................................................................................................................................... 6438 exit ...................................................................................................................................................... 6439 rnc-id ................................................................................................................................................... 6440 HSS...
  • Page 82▀ Contents qos-update-timeout ............................................................................................................................. 6501 signaling-flag ....................................................................................................................................... 6502 signaling-flow ...................................................................................................................................... 6504 traffic-policy ......................................................................................................................................... 6506 IMS Sh Service Configuration Mode Commands...
  • Page 83 Contents ▀ respond-to-non-existing-session ........................................................................................................ 6579 sess-replacement ............................................................................................................................... 6580 setup-timeout ...................................................................................................................................... 6582 w-apn .................................................................................................................................................. 6583 IPSG RADIUS Snoop Configuration Mode...
  • Page 84▀ Contents redirect css service (for uplink, by TCP/UDP packets) ....................................................................... 6698 redirect nexthop (by IP address masking) .......................................................................................... 6702...
  • Page 85 Contents ▀ srns-context-response-timeout ........................................................................................................... 6778 tigoc-timeout ....................................................................................................................................... 6779 tintc-timeout ........................................................................................................................................ 6780 LAC Service Configuration Mode Commands ........................................... 6781 allow.......................................................................................................................................................
  • Page 86▀ Contents mtp3-test-pattern ................................................................................................................................ 6837 priority ................................................................................................................................................. 6838 signaling-link-code .............................................................................................................................. 6839 sscf-nni-n1 .......................................................................................................................................... 6840 sscop-max-cc ...................................................................................................................................... 6841 sscop-max-pd ..................................................................................................................................... 6842...
  • Page 87 Contents ▀ proxy-lcp-authentication ..................................................................................................................... 6905 retransmission-timeout-first ................................................................................................................ 6906 retransmission-timeout-max ............................................................................................................... 6907 setup-timeout ...................................................................................................................................... 6908 single-port-mode ................................................................................................................................. 6909 trap...................................................................................................................................................... 6910...
  • Page 88▀ Contents LTE Custom TAI List Configuration Mode Commands ............................ 6975 end ...................................................................................................................................................... 6976 exit ...................................................................................................................................................... 6977 tai ........................................................................................................................................................ 6978...
  • Page 89 Contents ▀ precedence ......................................................................................................................................... 7034 LTE Paging Profile Configuration Mode Commands ................................ 7037 end ...................................................................................................................................................... 7038 exit ...................................................................................................................................................... 7039...
  • Page 90▀ Contents zone-code ........................................................................................................................................... 7107 MAG Service Configuration Mode Commands .......................................... 7109 bind ..................................................................................................................................................... 7110 encapsulation ...................................................................................................................................... 7112 end .........................................................................................................................................................
  • Page 91 Contents ▀ plmnid ................................................................................................................................................. 7173 MME MSC Pool Area Configuration Mode ................................................. 7175 end ...................................................................................................................................................... 7176 exit ...................................................................................................................................................... 7177...
  • Page 92▀ Contents network-sharing .................................................................................................................................. 7266 nri ........................................................................................................................................................ 7268 peer-mme............................................................................................................................................ 7269 peer-sgsn ............................................................................................................................................ 7271 pgw-address ....................................................................................................................................... 7273 plmn-id ................................................................................................................................................ 7275 policy...
  • Page 93 Contents ▀ MRME Service Configuration Mode Commands ....................................... 7343 associate............................................................................................................................................. 7344 attribute ............................................................................................................................................... 7345 bind ..................................................................................................................................................... 7346 disconnect........................................................................................................................................... 7348...
  • Page 94▀ Contents description........................................................................................................................................... 7403 end ...................................................................................................................................................... 7404 exit ...................................................................................................................................................... 7405 imei ..................................................................................................................................................... 7406 ORBEM Configuration Mode Commands ................................................... 7409 activate...
  • Page 95 Contents ▀ end ...................................................................................................................................................... 7481 exit ...................................................................................................................................................... 7482 passive-interface ................................................................................................................................ 7483 redistribute .......................................................................................................................................... 7484 router-id .............................................................................................................................................. 7486 timers spf...
  • Page 96▀ Contents usage-monitor ..................................................................................................................................... 7556 PCC-AF-Service Configuration Mode Commands .................................... 7559 associate pcc-service ......................................................................................................................... 7560 diameter dictionary ............................................................................................................................. 7561 diameter...
  • Page 97 Contents ▀ precedence ......................................................................................................................................... 7648 qos-profile ........................................................................................................................................... 7649 rating-group ........................................................................................................................................ 7650 reporting-level ..................................................................................................................................... 7651 service-identifier ................................................................................................................................. 7652 PCC-Event-Notification-Interface-Endpoint Configuration...
  • Page 98▀ Contents multiple-pcef-per-subscriber ............................................................................................................... 7720 profile .................................................................................................................................................. 7721 qos-profile ........................................................................................................................................... 7723 spr-failure ............................................................................................................................................ 7725 ssc-usage-update-policy ..................................................................................................................... 7726 timedef ................................................................................................................................................ 7728...
  • Page 99 Contents ▀ max-tunnels-per-ue ............................................................................................................................ 7802 plmn id ................................................................................................................................................ 7803 setup-timeout ...................................................................................................................................... 7804 PDIF Service Configuration Mode Commands .......................................... 7805...
  • Page 100▀ Contents pcf-session-id-change restart-ppp ...................................................................................................... 7869 pdsn type0-tft attempt-inner-match ..................................................................................................... 7870 peer-pcf ............................................................................................................................................... 7871 pma-capability-indicator ...................................................................................................................... 7872 policy ................................................................................................................................................... 7873...
  • Page 101 Contents ▀ P-GW Service Configuration Mode Commands ........................................ 7943 associate............................................................................................................................................. 7944 authorize-with-hss .............................................................................................................................. 7946 dns-client ............................................................................................................................................ 7948 egtp ........................................................................................................................................................
  • Page 102▀ Contents shutdown............................................................................................................................................. 8029 PVC Interface Configuration Mode Commands......................................... 8031 crypto-map .......................................................................................................................................... 8032 description........................................................................................................................................... 8033 end ...................................................................................................................................................... 8034 exit .........................................................................................................................................................
  • Page 103 Contents ▀ rtt-samples .......................................................................................................................................... 8101 rtt-variance .......................................................................................................................................... 8102 sampling-interval ................................................................................................................................ 8103 RANAP Cause Code Group Configuration Mode ...................................... 8105...
  • Page 104▀ Contents release-compliance ............................................................................................................................. 8168 reset-resource ..................................................................................................................................... 8170 RoHC Profile Common Options Configuration Mode Commands .......... 8171 delay-release-hc-context-timer ........................................................................................................... 8172...
  • Page 105 Contents ▀ optimistic-mode-ack-limit .................................................................................................................... 8224 piggyback-wait-time ............................................................................................................................ 8225 preferred-feedback-mode ................................................................................................................... 8226 rtp-sn-p ............................................................................................................................................... 8228 rtp-sn-p-override ................................................................................................................................. 8229 sliding-window-ts ...................................................................................................................................
  • Page 106▀ Contents exit ...................................................................................................................................................... 8285 ip ......................................................................................................................................................... 8286 SAEGW Service Configuration Mode Commands .................................... 8289 associate ............................................................................................................................................. 8290 end .........................................................................................................................................................
  • Page 107 Contents ▀ Service Redundancy Protocol Configuration Mode Commands............. 8347 advertise-routes-in-standby-state ....................................................................................................... 8348 audit .................................................................................................................................................... 8350 bfd-mon-ignore-dead-interval ............................................................................................................. 8352 bind...
  • Page 108▀ Contents congestion-action-profile..................................................................................................................... 8420 end ...................................................................................................................................................... 8421 exit ...................................................................................................................................................... 8422 SGSN Global Configuration Mode Commands.......................................... 8423 aggregate-ipc-msg .............................................................................................................................. 8424 apn-resolve-dns-query...
  • Page 109 Contents ▀ exchange-mode .................................................................................................................................. 8484 exit ...................................................................................................................................................... 8485 psp-mode ............................................................................................................................................ 8486 routing-context .................................................................................................................................... 8487 sctp-alpha ........................................................................................................................................... 8489 sctp-beta ................................................................................................................................................
  • Page 110▀ Contents sm ....................................................................................................................................................... 8562 SGTP Service Configuration Mode Commands ........................................ 8565 direct-tunnel-disabled-ggsn ................................................................................................................ 8566 disable-remote-restart-counter-verification ......................................................................................... 8568 end .........................................................................................................................................................
  • Page 111 Contents ▀ t-3x02 .................................................................................................................................................. 8641 SMS Service Configuration Mode Commands .......................................... 8643 cp-data ................................................................................................................................................ 8644 end ...................................................................................................................................................... 8645 exit...
  • Page 112▀ Contents cscf private-user-id ............................................................................................................................. 8709 cscf session-template ......................................................................................................................... 8710 data-tunneling ignore df-bit ................................................................................................................. 8711 dcca origin host ................................................................................................................................... 8712...
  • Page 113 Contents ▀ max-pdn-connections ......................................................................................................................... 8778 mediation-device ................................................................................................................................ 8779 mobile-ip ............................................................................................................................................. 8781 mobile-ip ha ........................................................................................................................................ 8784 mobile-ip reg-lifetime-override ............................................................................................................ 8785...
  • Page 114▀ Contents on-network-error ................................................................................................................................. 8858 on-unknown-user ................................................................................................................................ 8859 priv-lvl.................................................................................................................................................. 8861 rem_addr client-ip ............................................................................................................................... 8863 server .................................................................................................................................................. 8864 user-id ................................................................................................................................................. 8867...
  • Page 115 Contents ▀ ip vrf .................................................................................................................................................... 8921 ipv6 address ....................................................................................................................................... 8922 tunnel-mode ........................................................................................................................................ 8923 TWAN Profile Configuration Mode Commands ............................................
  • Page 116▀ Contents responder-mode-duration ................................................................................................................... 8994 ▄ Command Line Interface Reference, StarOS Release 17 cxvi
  • Page 117: About this GuideAbout this Guide This preface describes the Command Line Interface Reference and its document conventions. This reference describes how to...
  • Page 118 About this Guide ▀ Conventions Used Conventions Used The following tables describe the conventions used throughout this documentation. Icon...
  • Page 119About this Guide CLI Command Sections ▀ CLI Command Sections The following table describes the individual sections in the command...
  • Page 120 About this Guide ▀ Supported Documents and Resources Supported Documents and Resources Related Common Documentation The following common documents...
  • Page 121About this Guide Supported Documents and Resources ▀  MURAL User Guide  MVG Administration Guide  NAT Administration Guide...
  • Page 122 About this Guide ▀ Contacting Customer Support Contacting Customer Support Use the information in this section to contact customer...
  • Page 123: Chapter 1 Command Line Interface OverviewChapter 1 Command Line Interface Overview This chapter describes the numerous features in the command line interface (CLI). It includes...
  • Page 124 Command Line Interface Overview ▀ CLI Structure CLI Structure CLI commands are strings of commands or keywords and user-specified...
  • Page 125Command Line Interface Overview CLI Command Modes ▀ CLI Command Modes There are two primary CLI command modes:  Exec...
  • Page 126 Command Line Interface Overview ▀ CLI Administrative Users CLI Administrative Users This section contains information on the administrative user...
  • Page 127Command Line Interface Overview CLI Administrative Users ▀ The default value is 1 (CLI). RADIUS Mapping System RADIUS server configuration...
  • Page 128 Command Line Interface Overview ▀ CLI Administrative Users The NAS is defined as a client-side requesting component associated with...
  • Page 129Command Line Interface Overview CLI Administrative Users ▀ Table 3. User Privilege to User Type Mapping User Type as Defined...
  • Page 130 Command Line Interface Overview ▀ CLI Administrative Users  exit  help  logs checkpoint  no logging active...
  • Page 131Command Line Interface Overview CLI Administrative Users ▀  monitor subscriber  newcall  no card  no debug ...
  • Page 132 Command Line Interface Overview ▀ CLI Administrative Users Security Administrator Mode Commands Security administrators can access all system commands....
  • Page 133Command Line Interface Overview CLI Contexts ▀ CLI Contexts A context is a group of configuration parameters that apply to...
  • Page 134 Command Line Interface Overview ▀ Understanding the CLI Command Prompt Understanding the CLI Command Prompt The CLI provides an...
  • Page 135Command Line Interface Overview CLI Command Syntax ▀ CLI Command Syntax This section describes the components of the CLI command...
  • Page 136 Command Line Interface Overview ▀ Entering and Viewing CLI Commands Entering and Viewing CLI Commands This section describes various...
  • Page 137Command Line Interface Overview Entering and Viewing CLI Commands ▀ Using CLI Auto-Pagination When you enter commands whose expected results...
  • Page 138 Command Line Interface Overview ▀ Entering and Viewing CLI Commands After aborting the above action, you can again revisit...
  • Page 139Command Line Interface Overview Entering and Viewing CLI Commands ▀ A regular expression is a pattern that describes a set...
  • Page 140 Command Line Interface Overview ▀ Obtaining CLI Help Obtaining CLI Help The CLI provides context-sensitive help for every command...
  • Page 141Command Line Interface Overview Exiting the CLI and CLI Command Modes ▀ Exiting the CLI and CLI Command Modes A...
  • Page 142 Command Line Interface Overview ▀ Accessing the CLI Accessing the CLI Access the CLI through the following methods: ...
  • Page 143Command Line Interface Overview Accessing the CLI ▀ 3. If no configuration file is present (that is, this is the...
  • Page 144 Command Line Interface Overview ▀ Platform Related CLI Issues Platform Related CLI Issues StarOS runs on ASR 5x00 and...
  • Page 145Command Line Interface Overview IP Address Notation ▀ IP Address Notation When configuring a port interface via the CLI you...
  • Page 146 Command Line Interface Overview ▀ IP Address Notation Important: On the ASR 5000, routes with IPv6 prefix lengths less...
  • Page 147Command Line Interface Overview Alphanumeric Strings ▀ Alphanumeric Strings Some CLI commands require the entry of a string of characters...
  • Page 148 Command Line Interface Overview ▀ Alphanumeric Strings ▄ Command Line Interface Reference, StarOS Release 17 148
  • Page 149: Chapter 2 AAA Server Group Configuration Mode CommandsChapter 2 AAA Server Group Configuration Mode Commands The AAA Server Group Configuration Mode is used to create and manage...
  • Page 150 AAA Server Group Configuration Mode Commands ▀ description description Allows you to enter descriptive text for this configuration. Product...
  • Page 151AAA Server Group Configuration Mode Commands diameter accounting ▀ diameter accounting This command configures Diameter accounting parameters. Product All Privilege...
  • Page 152 AAA Server Group Configuration Mode Commands ▀ diameter accounting hd-mode: Sends records to the Diameter server, if all Diameter...
  • Page 153AAA Server Group Configuration Mode Commands diameter accounting ▀ max-transmissions max_transmissions Specifies the maximum number of transmission attempts for a...
  • Page 154 AAA Server Group Configuration Mode Commands ▀ diameter authentication diameter authentication This command configures Diameter authentication parameters. Product All...
  • Page 155AAA Server Group Configuration Mode Commands diameter authentication ▀ max-transmissions: Sets the configured maximum transmission attempts for Diameter authentication in...
  • Page 156 AAA Server Group Configuration Mode Commands ▀ diameter authentication redirect-host-avp { just-primary | primary-then-secondary } Specifies whether to use...
  • Page 157AAA Server Group Configuration Mode Commands diameter authentication failure-handling ▀ diameter authentication failure-handling This command configures the failure handling for...
  • Page 158 AAA Server Group Configuration Mode Commands ▀ diameter authentication failure-handling  retry-and-terminate: First retries, if it fails then terminates...
  • Page 159AAA Server Group Configuration Mode Commands diameter dictionary ▀ diameter dictionary This command is deprecated and is replaced by the...
  • Page 160 AAA Server Group Configuration Mode Commands ▀ end end Exits the current configuration mode and returns to the Exec...
  • Page 161AAA Server Group Configuration Mode Commands exit ▀ exit Exits the current mode and returns to the parent configuration mode....
  • Page 162 AAA Server Group Configuration Mode Commands ▀ radius radius This command configures basic RADIUS options. Product All Privilege Security...
  • Page 163AAA Server Group Configuration Mode Commands radius ▀ Dictionary Description 3gpp2 This dictionary consists not only of all of the...
  • Page 164 AAA Server Group Configuration Mode Commands ▀ radius keepalive: Enables the AAA server alive-dead detect mechanism based on sending...
  • Page 165AAA Server Group Configuration Mode Commands radius ▀ strip-domain { authentication-only | accounting-only } Specifies that the domain must be...
  • Page 166 AAA Server Group Configuration Mode Commands ▀ radius accounting radius accounting This command configures the current context’s RADIUS accounting...
  • Page 167AAA Server Group Configuration Mode Commands radius accounting ▀ Default: 10 minutes Important: This parameter should be set to allow...
  • Page 168 AAA Server Group Configuration Mode Commands ▀ radius accounting This CLI is independent of the APN or subscriber profile...
  • Page 169AAA Server Group Configuration Mode Commands radius accounting ▀ radius accounting timeout 16 Command Line Interface Reference, StarOS Release 17...
  • Page 170 AAA Server Group Configuration Mode Commands ▀ radius accounting apn-to-be-included radius accounting apn-to-be-included This command specifies the APN name...
  • Page 171AAA Server Group Configuration Mode Commands radius accounting algorithm ▀ radius accounting algorithm This command specifies the fail-over/load-balancing algorithm to...
  • Page 172 AAA Server Group Configuration Mode Commands ▀ radius accounting algorithm based IMSI addresses. That is, IMSI based round robin...
  • Page 173AAA Server Group Configuration Mode Commands radius accounting billing-version ▀ radius accounting billing-version This command configures billing-system version of RADIUS...
  • Page 174 AAA Server Group Configuration Mode Commands ▀ radius accounting gtp trigger-policy radius accounting gtp trigger-policy This command configures the...
  • Page 175AAA Server Group Configuration Mode Commands radius accounting ha policy ▀ radius accounting ha policy This command configures the RADIUS...
  • Page 176 AAA Server Group Configuration Mode Commands ▀ radius accounting interim radius accounting interim This command configures the volume of...
  • Page 177AAA Server Group Configuration Mode Commands radius accounting interim ▀ The following command triggers RADIUS interim accounting when the total...
  • Page 178 AAA Server Group Configuration Mode Commands ▀ radius accounting ip remote-address radius accounting ip remote-address This command configures IP...
  • Page 179AAA Server Group Configuration Mode Commands radius accounting keepalive ▀ radius accounting keepalive This command configures the keepalive authentication parameters...
  • Page 180 AAA Server Group Configuration Mode Commands ▀ radius accounting keepalive interval seconds Configures the time interval between the two...
  • Page 181AAA Server Group Configuration Mode Commands radius accounting pdif trigger-policy ▀ radius accounting pdif trigger-policy This command configures the policy...
  • Page 182 AAA Server Group Configuration Mode Commands ▀ radius accounting rp radius accounting rp This command configures the RADIUS accounting...
  • Page 183AAA Server Group Configuration Mode Commands radius accounting rp ▀ trigger-event { active-handoff | active-start-param-change | active-stop } active-start-param-change: Enabled...
  • Page 184 AAA Server Group Configuration Mode Commands ▀ radius accounting rp  active-stop: Enables an R-P event (and therefore a...
  • Page 185AAA Server Group Configuration Mode Commands radius accounting server ▀ radius accounting server For accounting, this command configures the RADIUS...
  • Page 186 AAA Server Group Configuration Mode Commands ▀ radius accounting server Important: The same RADIUS server IP address and port...
  • Page 187AAA Server Group Configuration Mode Commands radius accounting server ▀ priority priority Specifies the relative priority of this accounting server....
  • Page 188 AAA Server Group Configuration Mode Commands ▀ radius algorithm radius algorithm This command configures the RADIUS authentication server selection...
  • Page 189AAA Server Group Configuration Mode Commands radius allow ▀ radius allow This command configures the system behavior for allowing subscriber...
  • Page 190 AAA Server Group Configuration Mode Commands ▀ radius attribute radius attribute This command configures the system’s RADIUS identification parameters....
  • Page 191AAA Server Group Configuration Mode Commands radius attribute ▀  3gpp-nsapi  3gpp-pdp-type  3gpp-rat-type  3gpp-select-mode  3gpp-session-stopindicator ...
  • Page 192 AAA Server Group Configuration Mode Commands ▀ radius attribute  3gpp-ggsn-mcc-mnc  3gpp-gprs-qos-negotiated-profile  3gpp-imeisv  3gpp-imsi-mcc-mnc  3gpp-ms-timezone...
  • Page 193AAA Server Group Configuration Mode Commands radius attribute ▀ nexthop-forwarding-address nexthop_address Configures next hop IP address for this NAS IP...
  • Page 194 AAA Server Group Configuration Mode Commands ▀ radius attribute The system uses a revertive algorithm when transitioning active NAS...
  • Page 195AAA Server Group Configuration Mode Commands radius authenticate ▀ radius authenticate This command configures RADIUS authentication related parameters. Product All...
  • Page 196 AAA Server Group Configuration Mode Commands ▀ radius authenticate no radius authenticate null-username The following command re-enables sending of...
  • Page 197AAA Server Group Configuration Mode Commands radius authenticator-validation ▀ radius authenticator-validation This command enables/disables the MD5 authentication of RADIUS user....
  • Page 198 AAA Server Group Configuration Mode Commands ▀ radius charging radius charging This command configures basic RADIUS options for Active...
  • Page 199AAA Server Group Configuration Mode Commands radius charging ▀ max-outstanding max_messages Specifies the maximum number of outstanding messages a single...
  • Page 200 AAA Server Group Configuration Mode Commands ▀ radius charging accounting algorithm radius charging accounting algorithm This command specifies the...
  • Page 201AAA Server Group Configuration Mode Commands radius charging accounting server ▀ radius charging accounting server This command configures RADIUS charging...
  • Page 202 AAA Server Group Configuration Mode Commands ▀ radius charging accounting server oldports Sets the UDP communication port to the...
  • Page 203AAA Server Group Configuration Mode Commands radius charging algorithm ▀ radius charging algorithm This command specifies the RADIUS authentication server...
  • Page 204 AAA Server Group Configuration Mode Commands ▀ radius charging server radius charging server This command configures the RADIUS charging...
  • Page 205AAA Server Group Configuration Mode Commands radius charging server ▀ oldports Sets the UDP communication port to the old default...
  • Page 206 AAA Server Group Configuration Mode Commands ▀ radius ip vrf radius ip vrf This command associates the specific AAA...
  • Page 207AAA Server Group Configuration Mode Commands radius ip vrf ▀ different RADIUS servers using the same, overlapping NAS-IP address, if...
  • Page 208 AAA Server Group Configuration Mode Commands ▀ radius keepalive radius keepalive This command configures the RADIUS keepalive authentication parameters....
  • Page 209AAA Server Group Configuration Mode Commands radius keepalive ▀ password Specifies the password to be used for authentication. password must...
  • Page 210 AAA Server Group Configuration Mode Commands ▀ radius mediation-device radius mediation-device See the radius accounting server command. ▄ Command...
  • Page 211AAA Server Group Configuration Mode Commands radius probe-interval ▀ radius probe-interval This command configures the time interval between two RADIUS...
  • Page 212 AAA Server Group Configuration Mode Commands ▀ radius probe-max-retries radius probe-max-retries This command configures the number of retries for...
  • Page 213AAA Server Group Configuration Mode Commands radius probe-timeout ▀ radius probe-timeout This command configures the timeout duration for Interchassis Session...
  • Page 214 AAA Server Group Configuration Mode Commands ▀ radius server radius server This command configures RADIUS authentication server(s) in the...
  • Page 215AAA Server Group Configuration Mode Commands radius server ▀ [ encrypted ] key value Specifies the shared secret key used...
  • Page 216 AAA Server Group Configuration Mode Commands ▀ radius server probe-username user_name The user name sent to the RADIUS server...
  • Page 217AAA Server Group Configuration Mode Commands radius trigger ▀ radius trigger This command enables specific RADIUS triggers. Product GGSN P-GW...
  • Page 218 AAA Server Group Configuration Mode Commands ▀ radius trigger uli-change Specifies to enable RADIUS trigger for User Location Information...
  • Page 219: Chapter 3 AAL2 Node Configuration Mode CommandsChapter 3 AAL2 Node Configuration Mode Commands The AAL2 Node Configuration Mode is used to configure the ATM Adaptation Layer...
  • Page 220 AAL2 Node Configuration Mode Commands ▀ aal2-path-id aal2-path-id This command set the AAL2 path identifier with AAL2 node and...
  • Page 221AAL2 Node Configuration Mode Commands aal2-path-id ▀ Example Following command sets the AAL2 path identifier 2 in an AAL2 node...
  • Page 222 AAL2 Node Configuration Mode Commands ▀ end end Exits the current mode and returns to the Exec Mode. Product...
  • Page 223AAL2 Node Configuration Mode Commands exit ▀ exit Exits the current mode and returns to the previous mode. Product All...
  • Page 224 AAL2 Node Configuration Mode Commands ▀ point-code point-code This command configure the point code of adjacent AAL2 node in...
  • Page 225AAL2 Node Configuration Mode Commands point-code ▀ Command Line Interface Reference, StarOS Release 17 ▄ 225
  • Page 226
  • Page 227: Chapter 4 Accounting Policy Configuration Mode CommandsChapter 4 Accounting Policy Configuration Mode Commands The Accounting Policy Configuration Mode is used to define the accounting method, mode,...
  • Page 228 Accounting Policy Configuration Mode Commands ▀ accounting-event-trigger accounting-event-trigger Configures the response to specific event triggers for this policy. Multiple...
  • Page 229Accounting Policy Configuration Mode Commands accounting-event-trigger ▀ location-change Specifies that the action is initiated upon indication of a location change....
  • Page 230 Accounting Policy Configuration Mode Commands ▀ accounting-keys accounting-keys Aggregates the accounting information, using the configurable keys (QCI) along with...
  • Page 231Accounting Policy Configuration Mode Commands accounting-level ▀ accounting-level Configures the type of accounting performed by this profile. Product HSGW P-GW...
  • Page 232 Accounting Policy Configuration Mode Commands ▀ accounting-level  PDN identifier  User Equipment information if available (ESN/MEID)  Address...
  • Page 233Accounting Policy Configuration Mode Commands accounting-mode ▀ accounting-mode Configures the accounting mode for this profile. Product HSGW P-GW S-GW SAEGW...
  • Page 234 Accounting Policy Configuration Mode Commands ▀ apn-name-to-be-included apn-name-to-be-included This command configures whether the virtual or real Access Point Name...
  • Page 235Accounting Policy Configuration Mode Commands attribute ▀ attribute This command configures the attributes to be reported in Rf accounting. Product...
  • Page 236 Accounting Policy Configuration Mode Commands ▀ cc cc Configures a charging characteristics (CC) profile, within the accounting profile configuration,...
  • Page 237Accounting Policy Configuration Mode Commands cc ▀ buckets num Default: 4 Specifies the number of container changes in the S-GW...
  • Page 238 Accounting Policy Configuration Mode Commands ▀ cc time2 min hrs...time4 minutes hours: Specifies the second, third and fourth time-of-day...
  • Page 239Accounting Policy Configuration Mode Commands end ▀ end Exits the current configuration mode and returns to the Exec mode. Product...
  • Page 240 Accounting Policy Configuration Mode Commands ▀ exit exit Exits the current mode and returns to the parent configuration mode....
  • Page 241Accounting Policy Configuration Mode Commands max-containers ▀ max-containers Control the number of containers in an ACR message. Product GGSN HSGW...
  • Page 242 Accounting Policy Configuration Mode Commands ▀ operator-string operator-string Configures a text string to be included with accounting messages sent...
  • Page 243Accounting Policy Configuration Mode Commands service-context-id ▀ service-context-id Configures the value to be sent in the Service-Context-Id AVP, which defines...
  • Page 244 Accounting Policy Configuration Mode Commands ▀ session session This command controls the behavior of whether to send or suppress...
  • Page 245Accounting Policy Configuration Mode Commands session ▀ Example The following command suppresses sending of ACR-Interim message when the UE is...
  • Page 246 Accounting Policy Configuration Mode Commands ▀ trigger-type trigger-type This command enables/disables the event triggers for Rf-Gy interaction. Product GGSN...
  • Page 247Accounting Policy Configuration Mode Commands trigger-type ▀ gy-sdf-volume-limit { cache | immediate } Enables the SDF volume-limit trigger for Rf-Gy...
  • Page 248
  • Page 249: Chapter 5 ACL Configuration Mode CommandsChapter 5 ACL Configuration Mode Commands The Access Control List Configuration Mode is used to create and manage IP-based, user...
  • Page 250 ACL Configuration Mode Commands ▀ deny/permit (by source IP address masking) deny/permit (by source IP address masking) Filters subscriber...
  • Page 251ACL Configuration Mode Commands deny/permit (by source IP address masking) ▀  deny: Indicates the rule, when matched, drops the...
  • Page 252 ACL Configuration Mode Commands ▀ deny/permit (by source IP address masking) before permit 1.2.3.0 0.0.0.31 The following command sets...
  • Page 253ACL Configuration Mode Commands deny/permit (any) ▀ deny/permit (any) Filters subscriber sessions based on any packet received. This command is...
  • Page 254 ACL Configuration Mode Commands ▀ deny/permit (any) deny | permit Specifies the rule is either block (deny) or an...
  • Page 255ACL Configuration Mode Commands deny/permit (by host IP address) ▀ deny/permit (by host IP address) Filters subscriber sessions based on...
  • Page 256 ACL Configuration Mode Commands ▀ deny/permit (by host IP address)  deny: Indicates the rule, when matched, drops the...
  • Page 257ACL Configuration Mode Commands deny/permit (by source ICMP packets) ▀ deny/permit (by source ICMP packets) Filters subscriber sessions based on...
  • Page 258 ACL Configuration Mode Commands ▀ deny/permit (by source ICMP packets) Important: If the options specified do not exactly match...
  • Page 259ACL Configuration Mode Commands deny/permit (by source ICMP packets) ▀ source_host_address The IP address of the source host to filter...
  • Page 260 ACL Configuration Mode Commands ▀ deny/permit (by source ICMP packets) deny log icmp 10.2.3.0 0.0.0.31 host 10.2.4.16 168 11...
  • Page 261ACL Configuration Mode Commands deny/permit (by IP packets) ▀ deny/permit (by IP packets) Filters subscriber sessions based on the internet...
  • Page 262 ACL Configuration Mode Commands ▀ deny/permit (by IP packets) Important: If the options specified do not exactly match an...
  • Page 263ACL Configuration Mode Commands deny/permit (by IP packets) ▀ dest_host_address The IP address of the destination host to filter against...
  • Page 264 ACL Configuration Mode Commands ▀ deny/permit (by IP packets) The following sets the insertion point before the first rule...
  • Page 265ACL Configuration Mode Commands deny/permit (by TCP/UDP packets) ▀ deny/permit (by TCP/UDP packets) Filters subscriber sessions based on the transmission...
  • Page 266 ACL Configuration Mode Commands ▀ deny/permit (by TCP/UDP packets) before Indicates all rules defined subsequent to this command are...
  • Page 267ACL Configuration Mode Commands deny/permit (by TCP/UDP packets) ▀ Important: The mask must contain a contiguous set of one-bits from...
  • Page 268 ACL Configuration Mode Commands ▀ deny/permit (by TCP/UDP packets)  One-bits in this parameter mean that the corresponding bits...
  • Page 269ACL Configuration Mode Commands deny/permit (by TCP/UDP packets) ▀ The following sets the insertion point before the first rule defined...
  • Page 270 ACL Configuration Mode Commands ▀ description description Allows you to enter descriptive text for this configuration. Product All Privilege...
  • Page 271ACL Configuration Mode Commands end ▀ end Exits the current configuration mode and returns to the Exec mode. Product All...
  • Page 272 ACL Configuration Mode Commands ▀ exit exit Exits the current mode and returns to the parent configuration mode. Product...
  • Page 273ACL Configuration Mode Commands readdress server ▀ readdress server Alters the destination address and port number in TCP or UDP...
  • Page 274 ACL Configuration Mode Commands ▀ readdress server before Indicates all rules defined subsequent to this command are to be...
  • Page 275ACL Configuration Mode Commands readdress server ▀ any Specifies that the rule applies to all packets. host Specifies that the...
  • Page 276 ACL Configuration Mode Commands ▀ readdress server Important: The mask must contain a contiguous set of one-bits from the...
  • Page 277ACL Configuration Mode Commands readdress server ▀ before readdress server 192.168.10.4 udp any any The following command sets the insertion...
  • Page 278 ACL Configuration Mode Commands ▀ redirect context (by IP address masking) redirect context (by IP address masking) Redirects subscriber...
  • Page 279ACL Configuration Mode Commands redirect context (by IP address masking) ▀ context context_id The context identification number of the context...
  • Page 280 ACL Configuration Mode Commands ▀ redirect context (by IP address masking) before redirect context 23 198.162.22.0 0.0.0.31 The following...
  • Page 281ACL Configuration Mode Commands redirect context (any) ▀ redirect context (any) Redirects subscriber sessions based on any packet received. This...
  • Page 282 ACL Configuration Mode Commands ▀ redirect context (any) context context_id The context identification number of the context to which...
  • Page 283ACL Configuration Mode Commands redirect context (by host IP address) ▀ redirect context (by host IP address) Redirects subscriber sessions...
  • Page 284 ACL Configuration Mode Commands ▀ redirect context (by host IP address) context context_id The context identification number of the...
  • Page 285ACL Configuration Mode Commands redirect context (by source ICMP packets) ▀ redirect context (by source ICMP packets) Redirects subscriber sessions...
  • Page 286 ACL Configuration Mode Commands ▀ redirect context (by source ICMP packets) Important: If the options specified do not exactly...
  • Page 287ACL Configuration Mode Commands redirect context (by source ICMP packets) ▀ dest_address The IP address(es) to which the packet is...
  • Page 288 ACL Configuration Mode Commands ▀ redirect context (by source ICMP packets) before redirect context 23 icmp host 192.168.100.25 The...
  • Page 289ACL Configuration Mode Commands redirect context (by IP packets) ▀ redirect context (by IP packets) Redirects subscriber sessions based on...
  • Page 290 ACL Configuration Mode Commands ▀ redirect context (by IP packets) Important: If the options specified do not exactly match...
  • Page 291ACL Configuration Mode Commands redirect context (by IP packets) ▀ dest_address The IP address(es) to which the packet is to...
  • Page 292 ACL Configuration Mode Commands ▀ redirect context (by IP packets) The following command sets the insertion point after the...
  • Page 293ACL Configuration Mode Commands redirect context (by TCP/UDP packets) ▀ redirect context (by TCP/UDP packets) Redirects subscriber sessions based on...
  • Page 294 ACL Configuration Mode Commands ▀ redirect context (by TCP/UDP packets) before Indicates all rules defined subsequent to this command...
  • Page 295ACL Configuration Mode Commands redirect context (by TCP/UDP packets) ▀ host Specifies that the rule applies to a specific host...
  • Page 296 ACL Configuration Mode Commands ▀ redirect context (by TCP/UDP packets) eq dest_port Specifies a single, specific destination TCP port...
  • Page 297ACL Configuration Mode Commands redirect css delivery-sequence ▀ redirect css delivery-sequence This is a restricted command. In 9.0 and later...
  • Page 298 ACL Configuration Mode Commands ▀ redirect css service (any) redirect css service (any) Redirects subscriber sessions based on any...
  • Page 299ACL Configuration Mode Commands redirect css service (any) ▀ css service service_name The name of the active charging service to...
  • Page 300 ACL Configuration Mode Commands ▀ redirect css service (by host IP address) redirect css service (by host IP address)...
  • Page 301ACL Configuration Mode Commands redirect css service (by host IP address) ▀ css service service_name The name of the active...
  • Page 302 ACL Configuration Mode Commands ▀ redirect css service (by ICMP packets) redirect css service (by ICMP packets) Redirects subscriber...
  • Page 303ACL Configuration Mode Commands redirect css service (by ICMP packets) ▀ Important: If the options specified do not exactly match...
  • Page 304 ACL Configuration Mode Commands ▀ redirect css service (by ICMP packets) dest_host_address The IP address of the destination host...
  • Page 305ACL Configuration Mode Commands redirect css service (by ICMP packets) ▀ redirect css service chgsvc1 icmp host 192.168.200.11 The following...
  • Page 306 ACL Configuration Mode Commands ▀ redirect css service (by IP packets) redirect css service (by IP packets) Redirects subscriber...
  • Page 307ACL Configuration Mode Commands redirect css service (by IP packets) ▀ Important: If the options specified do not exactly match...
  • Page 308 ACL Configuration Mode Commands ▀ redirect css service (by IP packets) dest_host_address The IP address of the destination host...
  • Page 309ACL Configuration Mode Commands redirect css service (by IP packets) ▀ after redirect css service chgsvc1 ip host 192.168.100.25 any...
  • Page 310 ACL Configuration Mode Commands ▀ redirect css service (by source IP address masking) redirect css service (by source IP...
  • Page 311ACL Configuration Mode Commands redirect css service (by source IP address masking) ▀ css service service_name The name of the...
  • Page 312 ACL Configuration Mode Commands ▀ redirect css service (by TCP/UDP packets) redirect css service (by TCP/UDP packets) Redirects subscriber...
  • Page 313ACL Configuration Mode Commands redirect css service (by TCP/UDP packets) ▀ Important: If the options specified do not exactly match...
  • Page 314 ACL Configuration Mode Commands ▀ redirect css service (by TCP/UDP packets) Important: The mask must contain a contiguous set...
  • Page 315ACL Configuration Mode Commands redirect css service (by TCP/UDP packets) ▀ dest_wildcard This option is used in conjunction with the...
  • Page 316 ACL Configuration Mode Commands ▀ redirect css service (by TCP/UDP packets) The following command defines a rule definition that...
  • Page 317ACL Configuration Mode Commands redirect css service (for downlink, any) ▀ redirect css service (for downlink, any) Redirects subscriber sessions...
  • Page 318 ACL Configuration Mode Commands ▀ redirect css service (for downlink, any) css service service_name The name of the active...
  • Page 319ACL Configuration Mode Commands redirect css service (for downlink, by host IP address) ▀ redirect css service (for downlink, by...
  • Page 320 ACL Configuration Mode Commands ▀ redirect css service (for downlink, by host IP address) css service service_name The name...
  • Page 321ACL Configuration Mode Commands redirect css service (for downlink, by ICMP packets) ▀ redirect css service (for downlink, by ICMP...
  • Page 322 ACL Configuration Mode Commands ▀ redirect css service (for downlink, by ICMP packets) Important: If the options specified do...
  • Page 323ACL Configuration Mode Commands redirect css service (for downlink, by ICMP packets) ▀ source_host_address The IP address of the source...
  • Page 324 ACL Configuration Mode Commands ▀ redirect css service (for downlink, by ICMP packets) Example The following command defines a...
  • Page 325ACL Configuration Mode Commands redirect css service (for downlink, by IP packets) ▀ redirect css service (for downlink, by IP...
  • Page 326 ACL Configuration Mode Commands ▀ redirect css service (for downlink, by IP packets) Important: If the options specified do...
  • Page 327ACL Configuration Mode Commands redirect css service (for downlink, by IP packets) ▀ source_host_address The IP address of the source...
  • Page 328 ACL Configuration Mode Commands ▀ redirect css service (for downlink, by IP packets) before redirect css service chgsvc1 downlink...
  • Page 329ACL Configuration Mode Commands redirect css service (for downlink, by source IP address masking) ▀ redirect css service (for downlink,...
  • Page 330 ACL Configuration Mode Commands ▀ redirect css service (for downlink, by source IP address masking) no Removes the rule...
  • Page 331ACL Configuration Mode Commands redirect css service (for downlink, by source IP address masking) ▀ redirect css service chgsvc1 downlink...
  • Page 332 ACL Configuration Mode Commands ▀ redirect css service (for downlink, by TCP/UDP packets) redirect css service (for downlink, by...
  • Page 333ACL Configuration Mode Commands redirect css service (for downlink, by TCP/UDP packets) ▀ Important: If the options specified do not...
  • Page 334 ACL Configuration Mode Commands ▀ redirect css service (for downlink, by TCP/UDP packets)  One-bits in this parameter mean...
  • Page 335ACL Configuration Mode Commands redirect css service (for downlink, by TCP/UDP packets) ▀ dest_wildcard This option is used in conjunction...
  • Page 336 ACL Configuration Mode Commands ▀ redirect css service (for downlink, by TCP/UDP packets) The following command defines a rule...
  • Page 337ACL Configuration Mode Commands redirect css service (for uplink, any) ▀ redirect css service (for uplink, any) Redirects subscriber sessions...
  • Page 338 ACL Configuration Mode Commands ▀ redirect css service (for uplink, any) css service service_name The name of the active...
  • Page 339ACL Configuration Mode Commands redirect css service (for uplink, by host IP address) ▀ redirect css service (for uplink, by...
  • Page 340 ACL Configuration Mode Commands ▀ redirect css service (for uplink, by host IP address) no Removes the rule definition...
  • Page 341ACL Configuration Mode Commands redirect css service (for uplink, by host IP address) ▀ The following deletes the first rule...
  • Page 342 ACL Configuration Mode Commands ▀ redirect css service (for uplink, by ICMP packets) redirect css service (for uplink, by...
  • Page 343ACL Configuration Mode Commands redirect css service (for uplink, by ICMP packets) ▀ Important: If the options specified do not...
  • Page 344 ACL Configuration Mode Commands ▀ redirect css service (for uplink, by ICMP packets) source_host_address The IP address of the...
  • Page 345ACL Configuration Mode Commands redirect css service (for uplink, by ICMP packets) ▀ Example The following command defines a rule...
  • Page 346 ACL Configuration Mode Commands ▀ redirect css service (for uplink, by IP packets) redirect css service (for uplink, by...
  • Page 347ACL Configuration Mode Commands redirect css service (for uplink, by IP packets) ▀ Important: If the options specified do not...
  • Page 348 ACL Configuration Mode Commands ▀ redirect css service (for uplink, by IP packets) source_host_address The IP address of the...
  • Page 349ACL Configuration Mode Commands redirect css service (for uplink, by IP packets) ▀ no redirect css service chgsvc1 uplink ip...
  • Page 350 ACL Configuration Mode Commands ▀ redirect css service (for uplink, by source IP address masking) redirect css service (for...
  • Page 351ACL Configuration Mode Commands redirect css service (for uplink, by source IP address masking) ▀ uplink Apply this rule definition...
  • Page 352 ACL Configuration Mode Commands ▀ redirect css service (for uplink, by TCP/UDP packets) redirect css service (for uplink, by...
  • Page 353ACL Configuration Mode Commands redirect css service (for uplink, by TCP/UDP packets) ▀ before Indicates all rule definitions subsequent to...
  • Page 354 ACL Configuration Mode Commands ▀ redirect css service (for uplink, by TCP/UDP packets) host Specifies that the rule definition...
  • Page 355ACL Configuration Mode Commands redirect css service (for uplink, by TCP/UDP packets) ▀ eq dest_port Specifies a single, specific destination...
  • Page 356 ACL Configuration Mode Commands ▀ redirect nexthop (by IP address masking) redirect nexthop (by IP address masking) Redirects subscriber...
  • Page 357ACL Configuration Mode Commands redirect nexthop (by IP address masking) ▀ no Removes the rule which exactly matches the options...
  • Page 358 ACL Configuration Mode Commands ▀ redirect nexthop (by IP address masking) Important: Also note that “redirect” rules are ignored...
  • Page 359ACL Configuration Mode Commands redirect nexthop (any) ▀ redirect nexthop (any) Redirects subscriber sessions based on any packet received. This...
  • Page 360 ACL Configuration Mode Commands ▀ redirect nexthop (any) no Removes the rule which exactly matches the options specified. nexthop...
  • Page 361ACL Configuration Mode Commands redirect nexthop (any) ▀ after redirect nexthop 192.168.10.4 context 23 any The following deletes the first...
  • Page 362 ACL Configuration Mode Commands ▀ redirect nexthop (by host IP address) redirect nexthop (by host IP address) Redirects subscriber...
  • Page 363ACL Configuration Mode Commands redirect nexthop (by host IP address) ▀ no Removes the rule which exactly matches the options...
  • Page 364 ACL Configuration Mode Commands ▀ redirect nexthop (by host IP address) after redirect nexthop 192.168.10.4 context 23 host 192.168.200.11...
  • Page 365ACL Configuration Mode Commands redirect nexthop (by source ICMP packets) ▀ redirect nexthop (by source ICMP packets) Redirects subscriber sessions...
  • Page 366 ACL Configuration Mode Commands ▀ redirect nexthop (by source ICMP packets) Important: If the options specified do not exactly...
  • Page 367ACL Configuration Mode Commands redirect nexthop (by source ICMP packets) ▀ source_host_address The IP address of the source host to...
  • Page 368 ACL Configuration Mode Commands ▀ redirect nexthop (by source ICMP packets) Example The following command defines a rule that...
  • Page 369ACL Configuration Mode Commands redirect nexthop (by IP packets) ▀ redirect nexthop (by IP packets) Redirects subscriber sessions based on...
  • Page 370 ACL Configuration Mode Commands ▀ redirect nexthop (by IP packets) Important: If the options specified do not exactly match...
  • Page 371ACL Configuration Mode Commands redirect nexthop (by IP packets) ▀ source_host_address The IP address of the source host to filter...
  • Page 372 ACL Configuration Mode Commands ▀ redirect nexthop (by IP packets) The following command defines a rule that redirects packets...
  • Page 373ACL Configuration Mode Commands redirect nexthop (by TCP/UDP packets) ▀ redirect nexthop (by TCP/UDP packets) Redirects subscriber sessions based on...
  • Page 374 ACL Configuration Mode Commands ▀ redirect nexthop (by TCP/UDP packets) before Indicates all rules defined subsequent to this command...
  • Page 375ACL Configuration Mode Commands redirect nexthop (by TCP/UDP packets) ▀ Important: The mask must contain a contiguous set of one-bits...
  • Page 376 ACL Configuration Mode Commands ▀ redirect nexthop (by TCP/UDP packets)  One-bits in this parameter mean that the corresponding...
  • Page 377ACL Configuration Mode Commands redirect nexthop (by TCP/UDP packets) ▀ no redirect nexthop 192.168.10.4 context 23 udp any Command Line...
  • Page 378
  • Page 379: Chapter 6 ACS Bandwidth Policy Configuration Mode CommandsChapter 6 ACS Bandwidth Policy Configuration Mode Commands The ACS Bandwidth Policy Configuration Mode is used to create and manage...
  • Page 380 ACS Bandwidth Policy Configuration Mode Commands ▀ end end Exits the current configuration mode and returns to the Exec...
  • Page 381ACS Bandwidth Policy Configuration Mode Commands exit ▀ exit Exits the current mode and returns to the parent configuration mode....
  • Page 382 ACS Bandwidth Policy Configuration Mode Commands ▀ flow limit-for-bandwidth flow limit-for-bandwidth This command allows you to configure the flow...
  • Page 383ACS Bandwidth Policy Configuration Mode Commands group-id ▀ group-id This command allows you to configure the group ID for the...
  • Page 384 ACS Bandwidth Policy Configuration Mode Commands ▀ group-id violate-action { discard | lower-ip-precedence } Specifies the action to be...
  • Page 385: Chapter 7 ACS Charging Action Configuration Mode CommandsChapter 7 ACS Charging Action Configuration Mode Commands The ACS Charging Action Configuration Mode is used to configure Active Charging...
  • Page 386 ACS Charging Action Configuration Mode Commands ▀ allocation-retention-priority allocation-retention-priority This command allows you to configure the Allocation Retention Priority...
  • Page 387ACS Charging Action Configuration Mode Commands allocation-retention-priority ▀ situation, a lower ARP flow may be dropped to free up capacity....
  • Page 388 ACS Charging Action Configuration Mode Commands ▀ billing-action billing-action This command allows you to configure the billing action for...
  • Page 389ACS Charging Action Configuration Mode Commands billing-action ▀ If this option is configured, the system generates an EDR immediately when...
  • Page 390 ACS Charging Action Configuration Mode Commands ▀ billing-action rf Enables Rf accounting. Rf accounting is applicable only for dynamic...
  • Page 391ACS Charging Action Configuration Mode Commands cca charging credit ▀ cca charging credit This command allows you to enable/disable Credit...
  • Page 392 ACS Charging Action Configuration Mode Commands ▀ cca charging credit Usage Use this command to configure RADIUS/Diameter Prepaid Credit...
  • Page 393ACS Charging Action Configuration Mode Commands charge-units ▀ charge-units This command allows you to configure the charge units for RADIUS/DCCA...
  • Page 394 ACS Charging Action Configuration Mode Commands ▀ charge-volume charge-volume This command allows you to configure how the volume amount...
  • Page 395ACS Charging Action Configuration Mode Commands charge-volume ▀  rtcp: Charge volume for RTCP  rtp: Charge volume for RTP...
  • Page 396 ACS Charging Action Configuration Mode Commands ▀ charge-volume Volume Description Volume amount downlink bytes Downlink RTP bytes Important: Whenever...
  • Page 397ACS Charging Action Configuration Mode Commands content-filtering processing server-group ▀ content-filtering processing server-group This command allows you to enable/disable Category-based...
  • Page 398 ACS Charging Action Configuration Mode Commands ▀ content-id content-id This command allows you to specify the content ID to...
  • Page 399ACS Charging Action Configuration Mode Commands deactivate-predefined-rule ▀ deactivate-predefined-rule This command allows you to configure the predefined rule to ensure...
  • Page 400 ACS Charging Action Configuration Mode Commands ▀ end end Exits the current configuration mode and returns to the Exec...
  • Page 401ACS Charging Action Configuration Mode Commands exit ▀ exit Exits the current mode and returns to the parent configuration mode....
  • Page 402 ACS Charging Action Configuration Mode Commands ▀ flow action flow action This command allows you to specify the action...
  • Page 403ACS Charging Action Configuration Mode Commands flow action ▀ discard [ downlink | uplink ] Specifies to discard the specified...
  • Page 404 ACS Charging Action Configuration Mode Commands ▀ flow action Specifies the round-robin approach to select the server list from...
  • Page 405ACS Charging Action Configuration Mode Commands flow action ▀  #BEARER.ACCT-SESSION-ID#  #BEARER.CORRELATION-ID#  #BEARER.RULEBASE#  #BEARER.SERVED-BSA-ADDR#  #BEARER.SERVICE-NAME# ...
  • Page 406 ACS Charging Action Configuration Mode Commands ▀ flow action Note that encryption is supported only for the following fields:...
  • Page 407ACS Charging Action Configuration Mode Commands flow action ▀ terminate-session Specifies to terminate the session. When a rule pointing to...
  • Page 408 ACS Charging Action Configuration Mode Commands ▀ flow action Most of the header fields are copied directly from the...
  • Page 409ACS Charging Action Configuration Mode Commands flow idle-timeout ▀ flow idle-timeout This command allows you to configure the maximum duration...
  • Page 410 ACS Charging Action Configuration Mode Commands ▀ flow limit-for-bandwidth flow limit-for-bandwidth For Session Control functionality this command allows you...
  • Page 411ACS Charging Action Configuration Mode Commands flow limit-for-bandwidth ▀ Important: It is recommended that this parameter be configured to at...
  • Page 412 ACS Charging Action Configuration Mode Commands ▀ flow limit-for-bandwidth Usage Use this command to limit the bandwidth a subscriber...
  • Page 413ACS Charging Action Configuration Mode Commands flow limit-for-flow-type ▀ flow limit-for-flow-type This command allows you to specify the maximum number...
  • Page 414 ACS Charging Action Configuration Mode Commands ▀ flow limit-for-flow-type If the limit specified by the flow limit-across-applications command in...
  • Page 415ACS Charging Action Configuration Mode Commands ip tos ▀ ip tos This command allows you to configure the IP Type...
  • Page 416 ACS Charging Action Configuration Mode Commands ▀ ip tos downlink Specifies the ToS only for downlink packets. uplink Specifies...
  • Page 417ACS Charging Action Configuration Mode Commands ip vlan ▀ ip vlan This command allows you to configure the VLAN identifier...
  • Page 418 ACS Charging Action Configuration Mode Commands ▀ ip vlan The following command sets the IP VLAN range back to...
  • Page 419ACS Charging Action Configuration Mode Commands nexthop-forwarding-address ▀ nexthop-forwarding-address This command allows you to configure the nexthop forwarding address. Product...
  • Page 420 ACS Charging Action Configuration Mode Commands ▀ pco-custom1 pco-custom1 This command configures the Protocol Configuration Options (PCO) value that...
  • Page 421ACS Charging Action Configuration Mode Commands product-offer-id-avp ▀ product-offer-id-avp This command enables sending the “Product-Offer-ID” AVP with traffic identifier for...
  • Page 422 ACS Charging Action Configuration Mode Commands ▀ qos-class-identifier qos-class-identifier This command allows you to configure the QoS Class Identifier...
  • Page 423ACS Charging Action Configuration Mode Commands qos-renegotiate ▀ qos-renegotiate This command allows you to configure the QoS traffic class for...
  • Page 424 ACS Charging Action Configuration Mode Commands ▀ qos-renegotiate Usage Use this command to configure the QoS traffic class for...
  • Page 425ACS Charging Action Configuration Mode Commands retransmissions-counted ▀ retransmissions-counted This command allows you to specify whether to count (for billing...
  • Page 426 ACS Charging Action Configuration Mode Commands ▀ service-detection service-detection The service-detection session-update command enables the support for users’ QoS...
  • Page 427ACS Charging Action Configuration Mode Commands service-identifier ▀ service-identifier This command allows you to configure the service identifier to use...
  • Page 428 ACS Charging Action Configuration Mode Commands ▀ stripurl token stripurl token This command allows you to configure the token...
  • Page 429ACS Charging Action Configuration Mode Commands tft packet-filter ▀ tft packet-filter This command allows you to specify the packet filter...
  • Page 430 ACS Charging Action Configuration Mode Commands ▀ tft-notify-ue tft-notify-ue This command allows you to to control whether TFT updates...
  • Page 431ACS Charging Action Configuration Mode Commands tos ▀ tos This command allows you to configure the Type of Service (ToS)...
  • Page 432 ACS Charging Action Configuration Mode Commands ▀ tos uplink Specifies the ToS only for uplink packets. Usage Use this...
  • Page 433ACS Charging Action Configuration Mode Commands video bitrate ▀ video bitrate This command allows you to specify the default target...
  • Page 434 ACS Charging Action Configuration Mode Commands ▀ video cae-readdressing video cae-readdressing This command allows you to enable CAE (Content...
  • Page 435ACS Charging Action Configuration Mode Commands video detailed-statistics ▀ video detailed-statistics This command allows you to enable the collection of...
  • Page 436 ACS Charging Action Configuration Mode Commands ▀ video optimization-preprocessing all video optimization-preprocessing all This command allows you to enable...
  • Page 437ACS Charging Action Configuration Mode Commands video optimization-preprocessing cae-readdressing ▀ video optimization-preprocessing cae-readdressing This command allows you to enable CAE...
  • Page 438 ACS Charging Action Configuration Mode Commands ▀ video pacing by-policing video pacing by-policing This command allows you to enable...
  • Page 439ACS Charging Action Configuration Mode Commands video pacing by-policing ▀ -noconfirm Specifies that the command must execute without prompting for...
  • Page 440 ACS Charging Action Configuration Mode Commands ▀ xheader-insert xheader-insert This command allows you to specify the extension-header (x-header) format...
  • Page 441ACS Charging Action Configuration Mode Commands xheader-insert ▀ Note that if the value of the key is changed on the...
  • Page 442
  • Page 443: Chapter 8 ACS Configuration Mode CommandsChapter 8 ACS Configuration Mode Commands The ACS Configuration Mode is used to manage active charging service (ACS)/enhanced charging service...
  • Page 444 ACS Configuration Mode Commands ▀ accelerate-flow accelerate-flow This command allows you to create/configure/delete Flow Aware Packet Acceleration (FAPA) feature....
  • Page 445ACS Configuration Mode Commands access-ruledef ▀ access-ruledef This command allows you to create/configure/delete access rule definitions (ruledefs). Important: This command...
  • Page 446 ACS Configuration Mode Commands ▀ access-ruledef Important: An access ruledef can be referenced by multiple Stateful Firewall rulebases. Important:...
  • Page 447ACS Configuration Mode Commands bandwidth-policy ▀ bandwidth-policy This command allows you to create/configure/delete bandwidth policies. Product ACS Privilege Security Administrator,...
  • Page 448 ACS Configuration Mode Commands ▀ bandwidth-policy bandwidth-policy test73 ▄ Command Line Interface Reference, StarOS Release 17 448
  • Page 449ACS Configuration Mode Commands buffering-limit ▀ buffering-limit This command allows you to configure packet buffering limits. Product ACS Privilege Security...
  • Page 450 ACS Configuration Mode Commands ▀ charging-action charging-action This command allows you to create/configure/delete ACS charging actions. Important: A maximum...
  • Page 451ACS Configuration Mode Commands charging-action ▀ Also see the ACS Charging Action Configuration Mode Commands chapter. Example The following command...
  • Page 452 ACS Configuration Mode Commands ▀ check-point accounting check-point accounting This command configures micro checkpoint syncup timer for ICSR and...
  • Page 453ACS Configuration Mode Commands check-point accounting ▀ This feature provides the operator with the flexibility to provision timer for accurate...
  • Page 454 ACS Configuration Mode Commands ▀ content-filtering category match-method content-filtering category match-method This command allows you to specify the match...
  • Page 455ACS Configuration Mode Commands content-filtering category policy-id ▀ content-filtering category policy-id This command allows you to create/configure/delete Content Filtering Category...
  • Page 456 ACS Configuration Mode Commands ▀ content-filtering category policy-id -noconfirm Specifies that the command must execute without prompting for confirmation....
  • Page 457ACS Configuration Mode Commands credit-control ▀ credit-control This command allows you to enable/disable Prepaid Credit Control Configuration Mode. Product All...
  • Page 458 ACS Configuration Mode Commands ▀ credit-control [context_name]hostname(config-dcca)# Also see the Credit Control Configuration Mode Commands chapter. Example The following...
  • Page 459ACS Configuration Mode Commands diameter credit-control ▀ diameter credit-control Description This command has been deprecated, and is replaced by the...
  • Page 460 ACS Configuration Mode Commands ▀ edr-format edr-format This command allows you to create/configure/delete ACS Event Data Record (EDR) formats....
  • Page 461ACS Configuration Mode Commands edr-format ▀ The following command creates an EDR format named edr_format1, and enters the EDR Format...
  • Page 462 ACS Configuration Mode Commands ▀ edr-ipproto-port-map edr-ipproto-port-map This command enables IP protocol and server port mapping for Event Data...
  • Page 463ACS Configuration Mode Commands edr-udr-flow-control ▀ edr-udr-flow-control This command allows you to enable/disable flow control between Session Managers (SessMgrs) and...
  • Page 464 ACS Configuration Mode Commands ▀ end end Exits the current configuration mode and returns to the Exec mode. Product...
  • Page 465ACS Configuration Mode Commands exit ▀ exit Exits the current mode and returns to the parent configuration mode. Product All...
  • Page 466 ACS Configuration Mode Commands ▀ fair-usage deact-margin fair-usage deact-margin This command allows you to configure the deactivate margin for...
  • Page 467ACS Configuration Mode Commands fair-usage deact-margin ▀ fair-usage deact-margin 10 Command Line Interface Reference, StarOS Release 17 ▄ 467
  • Page 468 ACS Configuration Mode Commands ▀ fair-usage tcp-proxy fair-usage tcp-proxy This command allows you to configure the maximum number of...
  • Page 469ACS Configuration Mode Commands fair-usage threshold-percent ▀ fair-usage threshold-percent This command allows you to configure the usage threshold to start...
  • Page 470 ACS Configuration Mode Commands ▀ fair-usage threshold-percent The following command enables the Fair Usage feature, and configures the session...
  • Page 471ACS Configuration Mode Commands firewall dos-protection flooding ▀ firewall dos-protection flooding This command is configured to protect servers from mobile...
  • Page 472 ACS Configuration Mode Commands ▀ firewall dos-protection flooding packet limit packet_limit Specifies the maximum number of packets allowed during...
  • Page 473ACS Configuration Mode Commands firewall dos-protection ip-sweep ▀ firewall dos-protection ip-sweep This command is configured to detect Source IP-based flooding...
  • Page 474 ACS Configuration Mode Commands ▀ firewall dos-protection ip-sweep packet limit packet_limit Specifies the maximum number of packets allowed during...
  • Page 475ACS Configuration Mode Commands firewall flow-recovery ▀ firewall flow-recovery This command allows you to configure the Stateful Firewall’s Flow Recovery...
  • Page 476 ACS Configuration Mode Commands ▀ firewall flow-recovery Important: NAT flows will not be recovered. Example The following command configures...
  • Page 477ACS Configuration Mode Commands firewall max-ip-packet-size ▀ firewall max-ip-packet-size Description In StarOS 8.1 and later releases, for Rulebase-based Stateful Firewall...
  • Page 478 ACS Configuration Mode Commands ▀ firewall mime-flood firewall mime-flood Description In StarOS 8.1 and later releases, for Rulebase-based Stateful...
  • Page 479ACS Configuration Mode Commands firewall nat-alg ▀ firewall nat-alg This command enables/disables Network Address Translation (NAT) Application Level Gateways (ALGs)....
  • Page 480 ACS Configuration Mode Commands ▀ firewall nat-alg ipv4-and-ipv6 | ipv4-only | ipv6-only Specifies to enable/disable NAT44/NAT64 ALG.  ipv4-and-ipv6:...
  • Page 481ACS Configuration Mode Commands firewall no-ruledef-matches ▀ firewall no-ruledef-matches Description In StarOS 8.1 and later releases, this command is available...
  • Page 482 ACS Configuration Mode Commands ▀ firewall port-scan firewall port-scan This command allows you to configure Stateful Firewall’s Port Scan...
  • Page 483ACS Configuration Mode Commands firewall port-scan ▀  tcp: Specifies response timeout for TCP. response_timeout must be an integer from...
  • Page 484 ACS Configuration Mode Commands ▀ firewall protect-servers firewall protect-servers This command is configured to protect ISP servers from mobile...
  • Page 485ACS Configuration Mode Commands firewall protect-servers ▀ The following command is configured to protect all servers within a Firewall-and-NAT policy...
  • Page 486 ACS Configuration Mode Commands ▀ firewall ruledef firewall ruledef This command allows you to create/configure/delete Stateful Firewall ruledefs. Important:...
  • Page 487ACS Configuration Mode Commands firewall ruledef ▀ Important: The Stateful Firewall ruledefs are different from the ACS ruledefs. Also see...
  • Page 488 ACS Configuration Mode Commands ▀ firewall tcp-syn-flood-intercept firewall tcp-syn-flood-intercept Description In StarOS 8.1 and later releases, for Rulebase-based Stateful...
  • Page 489ACS Configuration Mode Commands firewall track-list ▀ firewall track-list This command allows you to configure the maximum number of server...
  • Page 490 ACS Configuration Mode Commands ▀ fw-and-nat action fw-and-nat action This command allows you to create/configure/delete Firewall-and-NAT actions. Important: This...
  • Page 491ACS Configuration Mode Commands fw-and-nat action ▀ fw-and-nat action test1 Command Line Interface Reference, StarOS Release 17 ▄ 491
  • Page 492 ACS Configuration Mode Commands ▀ fw-and-nat policy fw-and-nat policy This command allows you to create/configure/delete Firewall-and-NAT policies. Important: This...
  • Page 493ACS Configuration Mode Commands fw-and-nat policy ▀ Also see the Firewall-and-NAT Policy Configuration Mode Commands chapter. Example The following command...
  • Page 494 ACS Configuration Mode Commands ▀ group-of-objects group-of-objects This command allows you to create/configure/delete an ACS group-of-objects. Important: This command...
  • Page 495ACS Configuration Mode Commands group-of-objects ▀ string Specifies the data type as string. When creating a group, specifying the data...
  • Page 496 ACS Configuration Mode Commands ▀ group-of-prefixed-urls group-of-prefixed-urls This command allows you to create/configure/delete an ACS group-of-prefixed-URLs. Important: This command...
  • Page 497ACS Configuration Mode Commands group-of-prefixed-urls ▀ Example The following command creates group-of-prefixed-urls named test5, and enters the ACS Group-of- Prefixed-URLs...
  • Page 498 ACS Configuration Mode Commands ▀ group-of-ruledefs group-of-ruledefs This command allows you to create/configure/delete an ACS group-of-ruledefs. Important: In 14.1...
  • Page 499ACS Configuration Mode Commands group-of-ruledefs ▀ The following command creates a group-of-ruledefs named group1, and enters the ACS Group-of-Ruledefs Configuration...
  • Page 500 ACS Configuration Mode Commands ▀ h323 time-to-live h323 time-to-live This command allows you to configure the time period for...
  • Page 501ACS Configuration Mode Commands h323 timeout ▀ h323 timeout This command allows you to configure the timeout intervals for various...
  • Page 502 ACS Configuration Mode Commands ▀ h323 timeout unregistration unregistration_timeout Configures the timeout value for the unregistration request message sent...
  • Page 503ACS Configuration Mode Commands h323 tpkt ▀ h323 tpkt This command allows you to configure the maximum size of Transport...
  • Page 504 ACS Configuration Mode Commands ▀ h323 version h323 version This command allows you to configure the H.323 version number...
  • Page 505ACS Configuration Mode Commands host-pool ▀ host-pool This command allows you to create/configure/delete host pools. Product All Privilege Security Administrator,...
  • Page 506 ACS Configuration Mode Commands ▀ host-pool Also see the ACS Host Pool Configuration Mode Commands chapter. Example The following...
  • Page 507ACS Configuration Mode Commands idle-timeout ▀ idle-timeout This command allows you to configure the maximum duration a flow can remain...
  • Page 508 ACS Configuration Mode Commands ▀ idle-timeout If the Flow Mapping timer is disabled, then the Mapping timeout will not...
  • Page 509ACS Configuration Mode Commands imsi-pool ▀ imsi-pool This command allows you to create/configure/delete International Mobile Subscriber Identity (IMSI) pools. Product...
  • Page 510 ACS Configuration Mode Commands ▀ imsi-pool Also see the ACS IMSI Pool Configuration Mode Commands chapter. Example The following...
  • Page 511ACS Configuration Mode Commands ip dns-learnt-entries ▀ ip dns-learnt-entries This command allows you to configure how long to keep the...
  • Page 512 ACS Configuration Mode Commands ▀ ip dns-learnt-entries ip dns-learnt-entries timeout 900 ▄ Command Line Interface Reference, StarOS Release 17...
  • Page 513ACS Configuration Mode Commands ip max-fragments ▀ ip max-fragments This command allows you to limit the maximum number of IPv4/IPv6...
  • Page 514 ACS Configuration Mode Commands ▀ label content-id label content-id This command allows you to specify a label (text string)...
  • Page 515ACS Configuration Mode Commands nat allocation-failure ▀ nat allocation-failure This command allows you to configure the action to take when...
  • Page 516 ACS Configuration Mode Commands ▀ nat allocation-in-progress nat allocation-in-progress This command allows you to configure the action to take...
  • Page 517ACS Configuration Mode Commands nat ip downlink reassembly-timeout ▀ nat ip downlink reassembly-timeout This command configures the downlink IP reassembly...
  • Page 518 ACS Configuration Mode Commands ▀ nat tcp-2msl-timeout nat tcp-2msl-timeout This command allows you to configure the TCP 2MSL (Maximum...
  • Page 519ACS Configuration Mode Commands nat unsolicited-pkts ▀ nat unsolicited-pkts This command allows you to configure unsolicited packets. Product ACS NAT...
  • Page 520 ACS Configuration Mode Commands ▀ p2p-detection attribute p2p-detection attribute This command enables or disables the detection of SSL renegotiation...
  • Page 521ACS Configuration Mode Commands p2p-detection attribute ▀ p2p-detection attribute ssl-renegotiation max-entry-per-sessmgr 40000 id- reduce-factor 4 Command Line Interface Reference, StarOS...
  • Page 522 ACS Configuration Mode Commands ▀ p2p-detection behavioral p2p-detection behavioral This command enables or disables behavioral detection for unidentified traffic....
  • Page 523ACS Configuration Mode Commands p2p-detection ecs-analysis ▀ p2p-detection ecs-analysis This command enables or disables ECS analysis for analyzers — FTP,...
  • Page 524 ACS Configuration Mode Commands ▀ p2p-detection ecs-analysis p2p-detection ecs-analysis ftp ▄ Command Line Interface Reference, StarOS Release 17 524...
  • Page 525ACS Configuration Mode Commands p2p-detection protocol ▀ p2p-detection protocol This command enables/disables the detection of all or specified peer-to-peer (P2P)...
  • Page 526 ACS Configuration Mode Commands ▀ p2p-detection protocol no If previously enabled, disables the detection of the specific peer-to-peer protocol....
  • Page 527ACS Configuration Mode Commands p2p-detection protocol ▀ armagettron Specifies to detect Armagetron protocol. avi Specifies to detect AVI protocol. badoo...
  • Page 528 ACS Configuration Mode Commands ▀ p2p-detection protocol citrix Specifies to detect Citrix Independent Computing Architecture (ICA) protocol. clubbox Specifies...
  • Page 529ACS Configuration Mode Commands p2p-detection protocol ▀ Important: The facetime protocol option is available only in 9.0 and in 11.0...
  • Page 530 ACS Configuration Mode Commands ▀ p2p-detection protocol gamekit Specifies to detect GameKit protocol. Important: The gamekit protocol option is...
  • Page 531ACS Configuration Mode Commands p2p-detection protocol ▀ hbogo Specifies to detect HBO Go protocol. heytell Specifies to detect HeyTell protocol....
  • Page 532 ACS Configuration Mode Commands ▀ p2p-detection protocol imessage Specifies to detect iMessage protocol. imgur Specifies to detect Imgur protocol....
  • Page 533ACS Configuration Mode Commands p2p-detection protocol ▀ kik-messenger Specifies to detect Kik Messenger protocol. kontiki Specifies to detect Kontiki delivery...
  • Page 534 ACS Configuration Mode Commands ▀ p2p-detection protocol monkey3 Specifies to detect Monkey3 protocol. mozy Specifies to detect Mozy protocol....
  • Page 535ACS Configuration Mode Commands p2p-detection protocol ▀ off Specifies to detect Off-The-Record protocol. ogg Specifies to detect Ogg multimedia streaming...
  • Page 536 ACS Configuration Mode Commands ▀ p2p-detection protocol pcanywhere Specifies to detect PCAnywhere protocol. pinterest Specifies to detect Pinterest protocol....
  • Page 537ACS Configuration Mode Commands p2p-detection protocol ▀ rdt Specifies to detect Real Data Transport (RDT) protocol. regram Specifies to detect...
  • Page 538 ACS Configuration Mode Commands ▀ p2p-detection protocol skype Specifies to detect Skype protocol. slacker-radio Specifies to detect Slacker Radio...
  • Page 539ACS Configuration Mode Commands p2p-detection protocol ▀ stealthnet Specifies to detect StealthNet RShare network protocol. steam Specifies to detect Steam...
  • Page 540 ACS Configuration Mode Commands ▀ p2p-detection protocol tumblr Specifies to detect Tumblr protocol. tunnelvoice Specifies to detect Tunnel VoIP...
  • Page 541ACS Configuration Mode Commands p2p-detection protocol ▀ vine Specifies to detect Vine protocol. voipdiscount Specifies to detect VoipDiscount protocol. vopium...
  • Page 542 ACS Configuration Mode Commands ▀ p2p-detection protocol windows-store Specifies to detect Windows Phone App Store protocol. winmx Specifies to...
  • Page 543ACS Configuration Mode Commands p2p-detection protocol ▀ zattoo Specifies to detect Zattoo IPTV protocol. + More than one of the...
  • Page 544 ACS Configuration Mode Commands ▀ packet-filter packet-filter This command allows you to create/configure/delete ACS packet filters. Product ACS Privilege...
  • Page 545ACS Configuration Mode Commands passive-mode ▀ passive-mode This command allows you to configure the Active Charging Service to operate in...
  • Page 546 ACS Configuration Mode Commands ▀ pcp-service pcp-service Creates or deletes a Port Control Protocol (PCP) service. Important: This command...
  • Page 547ACS Configuration Mode Commands pcp-service ▀ pcp-service pcp1 Command Line Interface Reference, StarOS Release 17 ▄ 547
  • Page 548 ACS Configuration Mode Commands ▀ policy-control bearer-bw-limit policy-control bearer-bw-limit This command allows you to enable/disable per-bearer MBR policing—bandwidth limiting....
  • Page 549ACS Configuration Mode Commands policy-control bind-default-bearer ▀ policy-control bind-default-bearer For PCEF Bearer Binding in 3G and when BCM mode is...
  • Page 550 ACS Configuration Mode Commands ▀ policy-control bind-default-bearer Important: This CLI is applicable to all the rulebases in the chassis...
  • Page 551ACS Configuration Mode Commands policy-control burst-size ▀ policy-control burst-size This command allows you to configure the burst size for bandwidth...
  • Page 552 ACS Configuration Mode Commands ▀ policy-control charging-action-override policy-control charging-action-override This command has been removed from the ACS Configuration Mode,...
  • Page 553ACS Configuration Mode Commands policy-control charging-rule-base-name ▀ policy-control charging-rule-base-name This command allows you to configure how the Charging-Rule-Base-Name AVP from...
  • Page 554 ACS Configuration Mode Commands ▀ policy-control charging-rule-base-name use-first: If multiple Charging-Rule-Base-Name are received from the PCRF, since a call...
  • Page 555ACS Configuration Mode Commands policy-control dynamic-rule-limit ▀ policy-control dynamic-rule-limit This command allows you to enable/disable per-dynamic-rule MBR policing—bandwidth limiting. Product...
  • Page 556 ACS Configuration Mode Commands ▀ policy-control retransmissions-counted policy-control retransmissions-counted This command allows you to enable/disable charging of retransmitted packets...
  • Page 557ACS Configuration Mode Commands policy-control update-default-bearer ▀ policy-control update-default-bearer For PCEF Bearer Binding in 4G, this command allows you to...
  • Page 558 ACS Configuration Mode Commands ▀ policy-control update-default-bearer Important: This CLI is applicable to all the rulebases in the chassis...
  • Page 559ACS Configuration Mode Commands port-map ▀ port-map This command allows you to create/configure/delete port maps. Product All Privilege Security Administrator,...
  • Page 560 ACS Configuration Mode Commands ▀ port-map The following command creates a port map named portmap1, and enters the ACS...
  • Page 561ACS Configuration Mode Commands qos-group-of-ruledefs ▀ qos-group-of-ruledefs This command allows you to create/configure/delete a qos-group-of-ruledefs. Product ACS Privilege Security Administrator,...
  • Page 562 ACS Configuration Mode Commands ▀ qos-group-of-ruledefs The following command creates a qos-group-of-ruledefs named group1, and enters the ACS QoS-Group-of-...
  • Page 563ACS Configuration Mode Commands radio-congestion ▀ radio-congestion This command allows you to create/configure/delete Radio Congestion policy. Product MVG Privilege Security...
  • Page 564 ACS Configuration Mode Commands ▀ readdress-server-list readdress-server-list This command allows you to create/delete server list for DNS redirection. Important:...
  • Page 565ACS Configuration Mode Commands readdress-server-list ▀ The following command creates a charging action named homeDNSserver and changes to the ACS...
  • Page 566 ACS Configuration Mode Commands ▀ redirect user-agent redirect user-agent This command allows you to specify the user agent for...
  • Page 567ACS Configuration Mode Commands rulebase ▀ rulebase This command allows you to create/configure/delete ACS rulebases. Important: A maximum of 512...
  • Page 568 ACS Configuration Mode Commands ▀ rulebase The following command creates a rulebase named test1, and enters the ACS Rulebase...
  • Page 569ACS Configuration Mode Commands rulebase-list ▀ rulebase-list This command allows you to create and delete ACS rulebase lists. Product ACS...
  • Page 570 ACS Configuration Mode Commands ▀ rulebase-list rulebase-list rblist rulebase1 rulebase3 rulebase5 The following command deletes the rulebase list named...
  • Page 571ACS Configuration Mode Commands ruledef ▀ ruledef This command allows you to create/configure/delete ACS rule definitions. Important: A maximum of...
  • Page 572 ACS Configuration Mode Commands ▀ ruledef A ruledef represents a set of matching conditions across multiple L3 – L7...
  • Page 573ACS Configuration Mode Commands sip advanced ▀ sip advanced This command enables SIP ALG to maintain the same tag parameters...
  • Page 574 ACS Configuration Mode Commands ▀ system-limit l4-flows system-limit l4-flows This command allows you to configure the system-wide Layer 4...
  • Page 575ACS Configuration Mode Commands system-limit l4-flows ▀ processing a successive flow-usage update from active charging service a change in behavior...
  • Page 576 ACS Configuration Mode Commands ▀ tethering-database tethering-database This command allows you to enable/disable the Tethering Detection feature, and load...
  • Page 577ACS Configuration Mode Commands tethering-database ▀ ua-signature ua_signature_db_file_name Specifies the User Agent (UA) Signature database file to load. ua_signature_db_file_name must...
  • Page 578 ACS Configuration Mode Commands ▀ timedef timedef This command allows you to create/configure/delete ACS Time Definitions (timedefs). Important: This...
  • Page 579ACS Configuration Mode Commands timedef ▀ [context_name]hostname(config-acs-timedef)# Also see the ACS Timedef Configuration Mode Commands chapter. Example The following command...
  • Page 580 ACS Configuration Mode Commands ▀ udr-format udr-format This command allows you to create/configure/delete a User Data Record (UDR) format....
  • Page 581ACS Configuration Mode Commands udr-format ▀ udr-format udr_format1 Command Line Interface Reference, StarOS Release 17 ▄ 581
  • Page 582 ACS Configuration Mode Commands ▀ url-blacklisting match-method url-blacklisting match-method This command allows you to specify the match method to...
  • Page 583ACS Configuration Mode Commands xheader-format ▀ xheader-format This command allows you to create/configure/delete ACS extension-header (x-header) format specifications. Product ACS...
  • Page 584 ACS Configuration Mode Commands ▀ xheader-format xheader-format test ▄ Command Line Interface Reference, StarOS Release 17 584
  • Page 585: Chapter 9 ACS Group-of-Objects Configuration Mode CommandsChapter 9 ACS Group-of-Objects Configuration Mode Commands The ACS Group-of-Objects Configuration Mode is used to configure groups of Active Charging...
  • Page 586 ACS Group-of-Objects Configuration Mode Commands ▀ end end Exits the current configuration mode and returns to the Exec mode....
  • Page 587ACS Group-of-Objects Configuration Mode Commands exit ▀ exit Exits the current mode and returns to the parent configuration mode. Product...
  • Page 588 ACS Group-of-Objects Configuration Mode Commands ▀ member-object member-object This command allows you to add or remove objects from the...
  • Page 589: Chapter 10 ACS Group-of-Prefixed-URLs Configuration Mode CommandsChapter 10 ACS Group-of-Prefixed-URLs Configuration Mode Commands The ACS Group-of-Prefixed-URLs Configuration Mode is used to create and configure groups of...
  • Page 590 ACS Group-of-Prefixed-URLs Configuration Mode Commands ▀ end end Exits the current configuration mode and returns to the Exec mode....
  • Page 591ACS Group-of-Prefixed-URLs Configuration Mode Commands exit ▀ exit Exits the current mode and returns to the parent configuration mode. Product...
  • Page 592 ACS Group-of-Prefixed-URLs Configuration Mode Commands ▀ prefixed-url prefixed-url This command allows you to add or remove URLs from the...
  • Page 593: Chapter 11 ACS Group-of-Ruledefs Configuration Mode CommandsChapter 11 ACS Group-of-Ruledefs Configuration Mode Commands The ACS Group-of-Ruledefs Configuration Mode is used to configure groups of rule definitions...
  • Page 594 ACS Group-of-Ruledefs Configuration Mode Commands ▀ add-ruledef add-ruledef This command allows you to add or remove ruledefs from a...
  • Page 595ACS Group-of-Ruledefs Configuration Mode Commands add-ruledef ▀ add-ruledef priority 3 ruledef ruledef23 Command Line Interface Reference, StarOS Release 17 ▄...
  • Page 596 ACS Group-of-Ruledefs Configuration Mode Commands ▀ dynamic-command dynamic-command This command allows you to add or remove dynamic commands from...
  • Page 597ACS Group-of-Ruledefs Configuration Mode Commands end ▀ end Exits the current configuration mode and returns to the Exec mode. Product...
  • Page 598 ACS Group-of-Ruledefs Configuration Mode Commands ▀ exit exit Exits the current mode and returns to the parent configuration mode....
  • Page 599ACS Group-of-Ruledefs Configuration Mode Commands group-of-ruledefs-application ▀ group-of-ruledefs-application This command allows you to specify the purpose of setting up a...
  • Page 600 ACS Group-of-Ruledefs Configuration Mode Commands ▀ group-of-ruledefs-application Usage Use this command to specify the purpose of setting up a...
  • Page 601: Chapter 12 ACS Host Pool Configuration Mode CommandsChapter 12 ACS Host Pool Configuration Mode Commands The ACS Host Pool Configuration Mode is used to define a pool...
  • Page 602 ACS Host Pool Configuration Mode Commands ▀ end end Exits the current configuration mode and returns to the Exec...
  • Page 603ACS Host Pool Configuration Mode Commands exit ▀ exit Exits the current mode and returns to the parent configuration mode....
  • Page 604 ACS Host Pool Configuration Mode Commands ▀ ip ip This command allows you to add/remove an individual or a...
  • Page 605ACS Host Pool Configuration Mode Commands ip ▀ ip range 10.2.3.4 to 10.4.5.6 Command Line Interface Reference, StarOS Release 17...
  • Page 606
  • Page 607: Chapter 13 ACS IMSI Pool Configuration Mode CommandsChapter 13 ACS IMSI Pool Configuration Mode Commands The ACS IMSI Pool Configuration Mode is used to define a pool...
  • Page 608 ACS IMSI Pool Configuration Mode Commands ▀ end end Exits the current configuration mode and returns to the Exec...
  • Page 609ACS IMSI Pool Configuration Mode Commands exit ▀ exit Exits the current mode and returns to the parent configuration mode....
  • Page 610 ACS IMSI Pool Configuration Mode Commands ▀ imsi imsi This command allows you to add/remove an individual or a...
  • Page 611: Chapter 14 ACS Packet Filter Configuration Mode CommandsChapter 14 ACS Packet Filter Configuration Mode Commands The ACS Packet Filter Configuration Mode is used to create and configure...
  • Page 612 ACS Packet Filter Configuration Mode Commands ▀ direction direction This command allows you to specify the direction in which...
  • Page 613ACS Packet Filter Configuration Mode Commands end ▀ end Exits the current configuration mode and returns to the Exec mode....
  • Page 614 ACS Packet Filter Configuration Mode Commands ▀ exit exit Exits the current mode and returns to the parent configuration...
  • Page 615ACS Packet Filter Configuration Mode Commands ip local-port ▀ ip local-port This command allows you to configure the IP 5-tuple...
  • Page 616 ACS Packet Filter Configuration Mode Commands ▀ ip protocol ip protocol This command allows you to configure the IP...
  • Page 617ACS Packet Filter Configuration Mode Commands ip protocol ▀ ip protocol = 300 Command Line Interface Reference, StarOS Release 17...
  • Page 618 ACS Packet Filter Configuration Mode Commands ▀ ip remote-address ip remote-address This command allows you to configure the IP...
  • Page 619ACS Packet Filter Configuration Mode Commands ip remote-address ▀ start_ipv4/ipv6_address/mask and end_ipv4/ipv6_address/mask specify, for the range, the starting and ending...
  • Page 620 ACS Packet Filter Configuration Mode Commands ▀ ip remote-port ip remote-port This command allows you to configure the IP...
  • Page 621ACS Packet Filter Configuration Mode Commands priority ▀ priority This command allows you to configure the current packet filter’s priority....
  • Page 622
  • Page 623: Chapter 15 ACS Port Map Configuration Mode CommandsChapter 15 ACS Port Map Configuration Mode Commands The ACS Port Map Configuration Mode is used to define an application-port...
  • Page 624 ACS Port Map Configuration Mode Commands ▀ end end Exits the current configuration mode and returns to the Exec...
  • Page 625ACS Port Map Configuration Mode Commands exit ▀ exit Exits the current mode and returns to the parent configuration mode....
  • Page 626 ACS Port Map Configuration Mode Commands ▀ port port Adds or removes an individual or a range of TCP/UDP...
  • Page 627: Chapter 16 ACS QoS-Group-of-Ruledefs Configuration Mode CommandsChapter 16 ACS QoS-Group-of-Ruledefs Configuration Mode Commands The ACS QoS-Group-of-Ruledefs Configuration Mode is used to configure groups of rule definitions...
  • Page 628 ACS QoS-Group-of-Ruledefs Configuration Mode Commands ▀ add-group-of-ruledef add-group-of-ruledef This command allows you to add or remove groups-of-ruledefs from a...
  • Page 629ACS QoS-Group-of-Ruledefs Configuration Mode Commands add-ruledef ▀ add-ruledef This command allows you to add or remove ruledefs from a qos-group-of-ruledefs....
  • Page 630 ACS QoS-Group-of-Ruledefs Configuration Mode Commands ▀ end end Exits the current configuration mode and returns to the Exec mode....
  • Page 631ACS QoS-Group-of-Ruledefs Configuration Mode Commands exit ▀ exit Exits the current mode and returns to the parent configuration mode. Product...
  • Page 632
  • Page 633: Chapter 17 ACS Readdress Server List Configuration ModeChapter 17 ACS Readdress Server List Configuration Mode The ACS Readdress Server List Configuration Mode is used to add, configure,...
  • Page 634 ACS Readdress Server List Configuration Mode ▀ consecutive-failures consecutive-failures This command allows you to configure the consecutive number of...
  • Page 635ACS Readdress Server List Configuration Mode end ▀ end Exits the current configuration mode and returns to the Exec mode....
  • Page 636 ACS Readdress Server List Configuration Mode ▀ exit exit Exits the current mode and returns to the parent configuration...
  • Page 637ACS Readdress Server List Configuration Mode reactivation-time ▀ reactivation-time This command allows you to configure the time duration (in seconds)...
  • Page 638 ACS Readdress Server List Configuration Mode ▀ response-timeout response-timeout This command allows you to configure the time duration for...
  • Page 639ACS Readdress Server List Configuration Mode server ▀ server This command allows you to configure the DNS server(s) to which...
  • Page 640 ACS Readdress Server List Configuration Mode ▀ server server 2607:f0d0:1002:51::4/64 The following command removes the DNS server configuration for...
  • Page 641: Chapter 18 ACS Rulebase Configuration Mode CommandsChapter 18 ACS Rulebase Configuration Mode Commands The ACS Rulebase Configuration Mode is used to configure Active Charging Service (ACS)...
  • Page 642 ACS Rulebase Configuration Mode Commands ▀ action priority action priority This command allows you to configure the action priority...
  • Page 643ACS Rulebase Configuration Mode Commands action priority ▀ Default: Enabled Important: When R7 Gx is enabled, “static-and-dynamic” rules behave exactly...
  • Page 644 ACS Rulebase Configuration Mode Commands ▀ action priority charging_action_name must be the name of a charging action, and must...
  • Page 645ACS Rulebase Configuration Mode Commands active-charging rf ▀ active-charging rf This command allows you to enforce default rating group /...
  • Page 646 ACS Rulebase Configuration Mode Commands ▀ active-charging rf service_id must be an integer from 1 through 65535. Usage Use...
  • Page 647ACS Rulebase Configuration Mode Commands bandwidth default-policy ▀ bandwidth default-policy This command allows you to configure the default bandwidth policy...
  • Page 648 ACS Rulebase Configuration Mode Commands ▀ billing-records billing-records This command allows you to configure the type of billing to...
  • Page 649ACS Rulebase Configuration Mode Commands billing-records ▀ udr udr-format udr_format_name Generates UDRs with specified the format on the occurrence of...
  • Page 650 ACS Rulebase Configuration Mode Commands ▀ cca diameter requested-service-unit cca diameter requested-service-unit This command allows you to specify the...
  • Page 651ACS Rulebase Configuration Mode Commands cca diameter requested-service-unit ▀ Usage Use this command to include sub-AVPs based on time, volume,...
  • Page 652 ACS Rulebase Configuration Mode Commands ▀ cca quota cca quota This command allows you to configure various time- and...
  • Page 653ACS Rulebase Configuration Mode Commands cca quota ▀ This allows the immediately following chargeable user traffic to trip a quota...
  • Page 654 ACS Rulebase Configuration Mode Commands ▀ cca quota time-duration algorithm cca quota time-duration algorithm This command allows you to...
  • Page 655ACS Rulebase Configuration Mode Commands cca quota time-duration algorithm ▀ Default: 0 (disabled) The Continuous Time Periods (CTP) mechanism constructs...
  • Page 656 ACS Rulebase Configuration Mode Commands ▀ cca radius accounting interval cca radius accounting interval This command allows you to...
  • Page 657ACS Rulebase Configuration Mode Commands cca radius charging context ▀ cca radius charging context This command allows you to specify...
  • Page 658 ACS Rulebase Configuration Mode Commands ▀ cca radius user-password cca radius user-password This command allows you to configure the...
  • Page 659ACS Rulebase Configuration Mode Commands charging-action-override ▀ charging-action-override This command allows you to enable/disable overriding charging parameters of static rule...
  • Page 660 ACS Rulebase Configuration Mode Commands ▀ charging-action-override charging-action-override custom1 use-rule test ▄ Command Line Interface Reference, StarOS Release 17...
  • Page 661ACS Rulebase Configuration Mode Commands charging-rule-optimization ▀ charging-rule-optimization This command allows you to configure the internal optimization level to use,...
  • Page 662 ACS Rulebase Configuration Mode Commands ▀ charging-rule-optimization Both the high and medium options cause re-organization of the entire memory...
  • Page 663ACS Rulebase Configuration Mode Commands check-point accounting ▀ check-point accounting This command configures micro checkpoint syncup timer for ICSR and...
  • Page 664 ACS Rulebase Configuration Mode Commands ▀ check-point accounting This feature provides the operator with the flexibility to provision timer...
  • Page 665ACS Rulebase Configuration Mode Commands constituent-policies ▀ constituent-policies This command allows you to configure the Bandwidth, Content Based Billing (CBB),...
  • Page 666 ACS Rulebase Configuration Mode Commands ▀ constituent-policies fw-and-nat-policy fw_nat_policy_name Important: This keyword is customer specific, and is only available...
  • Page 667ACS Rulebase Configuration Mode Commands content-filtering category policy-id ▀ content-filtering category policy-id This command allows you to configure the Content...
  • Page 668 ACS Rulebase Configuration Mode Commands ▀ content-filtering category policy-id content-filtering category policy-id 101 ▄ Command Line Interface Reference, StarOS...
  • Page 669ACS Rulebase Configuration Mode Commands content-filtering flow-any-error ▀ content-filtering flow-any-error This command allows you to specify action to take on...
  • Page 670 ACS Rulebase Configuration Mode Commands ▀ content-filtering mode content-filtering mode This command allows you to enable/disable the specified Category-based...
  • Page 671ACS Rulebase Configuration Mode Commands content-filtering mode ▀ cf_server_group must be the name of a CFSG, and must be unique,...
  • Page 672 ACS Rulebase Configuration Mode Commands ▀ description description Allows you to enter descriptive text for this configuration. Product All...
  • Page 673ACS Rulebase Configuration Mode Commands dynamic-rule order ▀ dynamic-rule order This command allows you to specify whether dynamic rules are...
  • Page 674 ACS Rulebase Configuration Mode Commands ▀ edr edr-dcca-fh edr edr-dcca-fh This command configures generation of EDRs when the OCS...
  • Page 675ACS Rulebase Configuration Mode Commands edr edr-dcca-fh ▀ Usage Use this command to configure the trigger to generate EDRs when...
  • Page 676 ACS Rulebase Configuration Mode Commands ▀ edr p2p edr p2p This command configures generation of Event Detail Records (EDR)...
  • Page 677ACS Rulebase Configuration Mode Commands edr p2p ▀ reporting-edr reporting_edr_format_name Specifies to generate reporting EDR for P2P events. reporting_edr_format_name must...
  • Page 678 ACS Rulebase Configuration Mode Commands ▀ edr sn-charge-volume edr sn-charge-volume This command allows you to exclude/include packets/bytes that are...
  • Page 679ACS Rulebase Configuration Mode Commands edr suppress-zero-byte-records ▀ edr suppress-zero-byte-records This command disables/enables the creation of EDRs when there is...
  • Page 680 ACS Rulebase Configuration Mode Commands ▀ edr transaction-complete edr transaction-complete This command enables/disables the generation of an EDR on...
  • Page 681ACS Rulebase Configuration Mode Commands edr transaction-complete ▀ charging-edr charging_edr_format_name Important: This option is available only in 12.2 and later...
  • Page 682 ACS Rulebase Configuration Mode Commands ▀ edr voip-call-end edr voip-call-end This command enables/disables generation of EDRs on the completion...
  • Page 683ACS Rulebase Configuration Mode Commands edr voip-call-end ▀ charging-edr charging_edr_format_name Important: This option is available only in 12.2 and later...
  • Page 684 ACS Rulebase Configuration Mode Commands ▀ egcdr inactivity-meter egcdr inactivity-meter Description This command has been deprecated. It is included...
  • Page 685ACS Rulebase Configuration Mode Commands egcdr cdr-encoding ▀ egcdr cdr-encoding This command allows you to configure the eG-CDR encoding type....
  • Page 686 ACS Rulebase Configuration Mode Commands ▀ egcdr cdr-encoding egcdr cdr-encoding ascii delimiter comma ▄ Command Line Interface Reference, StarOS...
  • Page 687ACS Rulebase Configuration Mode Commands egcdr tariff ▀ egcdr tariff This command allows you to configure the eG-CDR tariff time...
  • Page 688 ACS Rulebase Configuration Mode Commands ▀ egcdr threshold egcdr threshold This command allows you to configure the thresholds for...
  • Page 689ACS Rulebase Configuration Mode Commands egcdr threshold ▀  total bytes: Specifies the limit for the total number of octets...
  • Page 690 ACS Rulebase Configuration Mode Commands ▀ egcdr time-duration algorithm egcdr time-duration algorithm This command allows you to specify the...
  • Page 691ACS Rulebase Configuration Mode Commands egcdr time-duration algorithm ▀ parking-meter seconds Specifies the Parking Meter (PM) period, in seconds. seconds...
  • Page 692 ACS Rulebase Configuration Mode Commands ▀ end end Exits the current configuration mode and returns to the Exec mode....
  • Page 693ACS Rulebase Configuration Mode Commands exit ▀ exit Exits the current mode and returns to the parent configuration mode. Product...
  • Page 694 ACS Rulebase Configuration Mode Commands ▀ extract-host-from-uri extract-host-from-uri This command allows you to configure whether to use the host...
  • Page 695ACS Rulebase Configuration Mode Commands extract-host-from-uri ▀ The following command configures extraction of host from URI for both HTTP and...
  • Page 696 ACS Rulebase Configuration Mode Commands ▀ firewall dos-protection firewall dos-protection This command allows you to configure Stateful Firewall protection...
  • Page 697ACS Rulebase Configuration Mode Commands firewall dos-protection ▀ ftp-bounce Enables protection against FTP Bounce attacks. In an FTP Bounce attack,...
  • Page 698 ACS Rulebase Configuration Mode Commands ▀ firewall dos-protection Usage Use this command to enable Stateful Firewall protection from different...
  • Page 699ACS Rulebase Configuration Mode Commands firewall flooding ▀ firewall flooding This command allows you to configure Stateful Firewall protection from...
  • Page 700 ACS Rulebase Configuration Mode Commands ▀ firewall flooding Usage Use this command to configure the maximum number of ICMP,...
  • Page 701ACS Rulebase Configuration Mode Commands firewall icmp-destination-unreachable-message-threshold ▀ firewall icmp-destination-unreachable-message-threshold This command allows you to configure a threshold on the...
  • Page 702 ACS Rulebase Configuration Mode Commands ▀ firewall icmp-destination-unreachable-message-threshold Example The following command configures a threshold of 10 ICMP error...
  • Page 703ACS Rulebase Configuration Mode Commands firewall max-ip-packet-size ▀ firewall max-ip-packet-size This command allows you to configure the maximum IP packet...
  • Page 704 ACS Rulebase Configuration Mode Commands ▀ firewall max-ip-packet-size The following command allows a maximum packet size of 60000 for...
  • Page 705ACS Rulebase Configuration Mode Commands firewall mime-flood ▀ firewall mime-flood This command allows you to configure Stateful Firewall protection from...
  • Page 706 ACS Rulebase Configuration Mode Commands ▀ firewall mime-flood Example The following command sets the maximum number of headers allowed...
  • Page 707ACS Rulebase Configuration Mode Commands firewall no-ruledef-matches ▀ firewall no-ruledef-matches This command allows you to configure the default action for...
  • Page 708 ACS Rulebase Configuration Mode Commands ▀ firewall no-ruledef-matches Optionally specify:  bypass-nat: Specifies to bypass Network Address Translation (NAT)....
  • Page 709ACS Rulebase Configuration Mode Commands firewall policy ▀ firewall policy This command allows you to enable/disable Stateful Firewall support for...
  • Page 710 ACS Rulebase Configuration Mode Commands ▀ firewall priority firewall priority This command allows you to add and specify the...
  • Page 711ACS Rulebase Configuration Mode Commands firewall priority ▀ deny [ charging-action charging_action_name ] Denies packets if the rule is matched....
  • Page 712 ACS Rulebase Configuration Mode Commands ▀ firewall priority Usage Use this command to add Stateful Firewall ruledefs to the...
  • Page 713ACS Rulebase Configuration Mode Commands firewall tcp-first-packet-non-syn ▀ firewall tcp-first-packet-non-syn This command allows you to configure the action to take...
  • Page 714 ACS Rulebase Configuration Mode Commands ▀ firewall tcp-idle-timeout-action firewall tcp-idle-timeout-action This command allows you to configure the Stateful Firewall...
  • Page 715ACS Rulebase Configuration Mode Commands firewall tcp-reset-message-threshold ▀ firewall tcp-reset-message-threshold This command allows you to configure a threshold on the...
  • Page 716 ACS Rulebase Configuration Mode Commands ▀ firewall tcp-reset-message-threshold firewall tcp-reset-message-threshold 10 then-block-server ▄ Command Line Interface Reference, StarOS Release...
  • Page 717ACS Rulebase Configuration Mode Commands firewall tcp-syn-flood-intercept ▀ firewall tcp-syn-flood-intercept This command allows you to configure the TCP intercept parameters...
  • Page 718 ACS Rulebase Configuration Mode Commands ▀ firewall tcp-syn-flood-intercept Default: none watch-timeout intercept_watch_timeout Specifies the TCP intercept watch timeout, in...
  • Page 719ACS Rulebase Configuration Mode Commands flow any-error ▀ flow any-error This command allows you to specify the charging action to...
  • Page 720 ACS Rulebase Configuration Mode Commands ▀ flow any-error For a packet dropped due to any error condition after data...
  • Page 721ACS Rulebase Configuration Mode Commands flow control-handshaking ▀ flow control-handshaking This command allows you to specify how to charge for...
  • Page 722 ACS Rulebase Configuration Mode Commands ▀ flow control-handshaking charge-separate-from-application Configures the charging action to separate the charging of the...
  • Page 723ACS Rulebase Configuration Mode Commands flow end-condition ▀ flow end-condition This command allows you to configure the end condition of...
  • Page 724 ACS Rulebase Configuration Mode Commands ▀ flow end-condition normal-end-signaling Creates an EDR with the specified EDR format whenever flow...
  • Page 725ACS Rulebase Configuration Mode Commands flow end-condition ▀ reporting-edr reporting_edr_format_name Important: This option is available only in 12.2 and later...
  • Page 726 ACS Rulebase Configuration Mode Commands ▀ flow limit-across-applications flow limit-across-applications This command allows you to limit the total number...
  • Page 727ACS Rulebase Configuration Mode Commands flow limit-across-applications ▀  UDP/ICMP: System waits for the flow timeout before updating the counter...
  • Page 728 ACS Rulebase Configuration Mode Commands ▀ flow rtsp-all-pkts flow rtsp-all-pkts This command allows you to delay charge packets in...
  • Page 729ACS Rulebase Configuration Mode Commands fw-and-nat default-policy ▀ fw-and-nat default-policy This command allows you to configure the default Firewall-and-NAT policy...
  • Page 730 ACS Rulebase Configuration Mode Commands ▀ http header-parse-limit http header-parse-limit This command allows you to configure the HTTP header...
  • Page 731ACS Rulebase Configuration Mode Commands http header-parse-limit ▀ For operators who have Stateful Firewall in-line service enabled, and are okay...
  • Page 732 ACS Rulebase Configuration Mode Commands ▀ ip reassembly-timeout ip reassembly-timeout This command allows you to configure how long to...
  • Page 733ACS Rulebase Configuration Mode Commands ip reset-tos ▀ ip reset-tos This command allows you to reset the IP Type of...
  • Page 734 ACS Rulebase Configuration Mode Commands ▀ nat binding-record nat binding-record This command allows you to configure NAT Binding Record...
  • Page 735ACS Rulebase Configuration Mode Commands nat binding-record ▀ + Indicates that more than one of the previous keywords can be...
  • Page 736 ACS Rulebase Configuration Mode Commands ▀ nat policy nat policy This command allows you to enable/disable Network Address Translation...
  • Page 737ACS Rulebase Configuration Mode Commands nat policy ▀ Important: Including the default NAT realm, a maximum of three NAT realms...
  • Page 738 ACS Rulebase Configuration Mode Commands ▀ nat suppress-aaa-update call-termination nat suppress-aaa-update call-termination This command allows you to suppress sending...
  • Page 739ACS Rulebase Configuration Mode Commands override-control ▀ override-control This command enables or disables Override Control feature. The Diameter capability exchange...
  • Page 740 ACS Rulebase Configuration Mode Commands ▀ override-control Important: In this release, both Inheritance and the Override Control features will...
  • Page 741ACS Rulebase Configuration Mode Commands p2p dynamic-flow-detection ▀ p2p dynamic-flow-detection This command allows you to enable/disable the P2P analyzer to...
  • Page 742 ACS Rulebase Configuration Mode Commands ▀ pcp service pcp service This command allows you to configure the PCP service...
  • Page 743ACS Rulebase Configuration Mode Commands post-processing dynamic ▀ post-processing dynamic This command allows you to specify ruledefs/group-of-ruledefs as dynamic post-processing...
  • Page 744 ACS Rulebase Configuration Mode Commands ▀ post-processing dynamic Usage Use this command to configure specific ruledefs/group-of-ruledefs as dynamic post-processing...
  • Page 745ACS Rulebase Configuration Mode Commands post-processing policy ▀ post-processing policy This command allows you to specify the post-processing policy to...
  • Page 746 ACS Rulebase Configuration Mode Commands ▀ post-processing policy configure active-charging service service1 ruledef http_low http any-match = TRUE cca...
  • Page 747ACS Rulebase Configuration Mode Commands post-processing priority ▀ post-processing priority This command allows you to configure the post-processing priority and...
  • Page 748 ACS Rulebase Configuration Mode Commands ▀ post-processing priority Important: The ruledef specified must be configured for post-processing. See the...
  • Page 749ACS Rulebase Configuration Mode Commands qos-renegotiate timeout ▀ qos-renegotiate timeout This command allows you to configure the timeout setting for...
  • Page 750 ACS Rulebase Configuration Mode Commands ▀ radius threshold radius threshold This command allows you to configure the interval and...
  • Page 751ACS Rulebase Configuration Mode Commands radius threshold ▀ radius threshold interval 600 Command Line Interface Reference, StarOS Release 17 ▄...
  • Page 752 ACS Rulebase Configuration Mode Commands ▀ retransmissions-counted retransmissions-counted This command allows to count retransmissions in all charging modules. Product...
  • Page 753ACS Rulebase Configuration Mode Commands ran bandwidth optimize ▀ ran bandwidth optimize This command is used to enable optimized calculation...
  • Page 754 ACS Rulebase Configuration Mode Commands ▀ ran bandwidth optimize By default, this CLI will be disabled. Any change in...
  • Page 755ACS Rulebase Configuration Mode Commands route priority ▀ route priority This command allows you to configure the routing of packets...
  • Page 756 ACS Rulebase Configuration Mode Commands ▀ route priority  h323: Route to H323 protocol analyzer.  http: Route to...
  • Page 757ACS Rulebase Configuration Mode Commands route priority ▀ Usage Instances of this CLI command control which packets are routed to...
  • Page 758 ACS Rulebase Configuration Mode Commands ▀ route priority Example The following command assigns a route and rule action with...
  • Page 759ACS Rulebase Configuration Mode Commands rtp dynamic-flow-detection ▀ rtp dynamic-flow-detection This command allows you to enable/disable the Real Time Streaming...
  • Page 760 ACS Rulebase Configuration Mode Commands ▀ rtsp initial-bytes-limit rtsp initial-bytes-limit This command allows to set the maximum number of...
  • Page 761ACS Rulebase Configuration Mode Commands ruledef-parsing ▀ ruledef-parsing This command allows you to configure whether to consider or ignore the...
  • Page 762 ACS Rulebase Configuration Mode Commands ▀ tcp 2msl-timeout tcp 2msl-timeout This command allows you to configure how long to...
  • Page 763ACS Rulebase Configuration Mode Commands tcp check-window-size ▀ tcp check-window-size This command allows you to enable/disable TCP window-size checking. Product...
  • Page 764 ACS Rulebase Configuration Mode Commands ▀ tcp mss tcp mss This command allows you to configure the TCP Maximum...
  • Page 765ACS Rulebase Configuration Mode Commands tcp mss ▀ optional header is parsed. If TCP MSS is present in the optional...
  • Page 766 ACS Rulebase Configuration Mode Commands ▀ tcp out-of-order-timeout tcp out-of-order-timeout Description This command has been deprecated, and is replaced...
  • Page 767ACS Rulebase Configuration Mode Commands tcp packets-out-of-order ▀ tcp packets-out-of-order This command allows you to configure processing of TCP packets...
  • Page 768 ACS Rulebase Configuration Mode Commands ▀ tcp packets-out-of-order Important: On the outgoing interface, no in-sequence delivery is guaranteed. This...
  • Page 769ACS Rulebase Configuration Mode Commands tcp proxy-mode ▀ tcp proxy-mode This command allows you to enable/disable TCP Proxy mode for...
  • Page 770 ACS Rulebase Configuration Mode Commands ▀ tcp proxy-mode  nexthop-readdressing: Specifies that subscriber-initiated TCP flows be proxied if Nexthop...
  • Page 771ACS Rulebase Configuration Mode Commands tethering-detection ▀ tethering-detection This command allows you to enable/disable the Tethering Detection feature for the...
  • Page 772 ACS Rulebase Configuration Mode Commands ▀ tethering-detection Example The following command enables the Tethering Detection feature in the rulebase,...
  • Page 773ACS Rulebase Configuration Mode Commands tft-notify-ue-def-bearer ▀ tft-notify-ue-def-bearer This command allows you to control whether TFT updates are sent to...
  • Page 774 ACS Rulebase Configuration Mode Commands ▀ timestamp rounding timestamp rounding This command allows you to enable/disable timestamp rounding in...
  • Page 775ACS Rulebase Configuration Mode Commands timestamp rounding ▀ Usage Use this command to configure the timestamp rounding setting. The specified...
  • Page 776 ACS Rulebase Configuration Mode Commands ▀ transactional-rule-matching transactional-rule-matching This command allows you to enable or disable transactional rule matching...
  • Page 777ACS Rulebase Configuration Mode Commands transactional-rule-matching ▀ alone. The keyword fastpath independently can no longer be used to turn on...
  • Page 778 ACS Rulebase Configuration Mode Commands ▀ transport-layer-checksum transport-layer-checksum This command allows you to enable/disable checksum verification for TCP and...
  • Page 779ACS Rulebase Configuration Mode Commands udr threshold ▀ udr threshold This command allows you to configure the threshold limit to...
  • Page 780 ACS Rulebase Configuration Mode Commands ▀ udr threshold bytes must be an integer from 100000 through 4000000000. Default: Disabled...
  • Page 781ACS Rulebase Configuration Mode Commands udr trigger ▀ udr trigger This command allows you to configure additional triggers for generating...
  • Page 782 ACS Rulebase Configuration Mode Commands ▀ udr trigger At the end of the “Tariff Time” period, the UDR files...
  • Page 783ACS Rulebase Configuration Mode Commands url-blacklisting action ▀ url-blacklisting action This command allows you to enable/disable URL Blacklisting functionality for...
  • Page 784 ACS Rulebase Configuration Mode Commands ▀ url-blacklisting action content-id content_id Usage Use this command to enable/disable URL Blacklisting at...
  • Page 785ACS Rulebase Configuration Mode Commands url-preprocessing ▀ url-preprocessing This command allows you to enable/disable a group-of-prefixed-urls for preprocessing of embedded...
  • Page 786 ACS Rulebase Configuration Mode Commands ▀ video optimization-preprocessing cae-readdressing video optimization-preprocessing cae-readdressing This command allows you to enable/disable CAE...
  • Page 787ACS Rulebase Configuration Mode Commands websocket flow-detection ▀ websocket flow-detection This command allows you to enable or disable websocket flow...
  • Page 788 ACS Rulebase Configuration Mode Commands ▀ wtp out-of-order-timeout wtp out-of-order-timeout Description This command has been deprecated, and is replaced...
  • Page 789ACS Rulebase Configuration Mode Commands wtp packets-out-of-order ▀ wtp packets-out-of-order This command allows you to configure how to process Wireless...
  • Page 790 ACS Rulebase Configuration Mode Commands ▀ wtp packets-out-of-order last. If all packets are not received, the packets will be...
  • Page 791ACS Rulebase Configuration Mode Commands xheader-encryption ▀ xheader-encryption This command allows you to configure X-Header Encryption feature’s parameters. Important: This...
  • Page 792 ACS Rulebase Configuration Mode Commands ▀ xheader-encryption Usage Use this command to configure the X-Header Encryption feature’s certificate and...
  • Page 793: Chapter 19 ACS Ruledef Configuration Mode CommandsChapter 19 ACS Ruledef Configuration Mode Commands The ACS Ruledef Configuration Mode is used to create and manage rule expressions...
  • Page 794 ACS Ruledef Configuration Mode Commands ▀ bearer 3gpp apn bearer 3gpp apn This command allows you to define rule...
  • Page 795ACS Ruledef Configuration Mode Commands bearer 3gpp apn ▀ Usage Use this command to define rule expressions to match an...
  • Page 796 ACS Ruledef Configuration Mode Commands ▀ bearer 3gpp imsi bearer 3gpp imsi This command allows you to define rule...
  • Page 797ACS Ruledef Configuration Mode Commands bearer 3gpp imsi ▀ The following command defines a rule expression to analyze user traffic...
  • Page 798 ACS Ruledef Configuration Mode Commands ▀ bearer 3gpp rat-type bearer 3gpp rat-type This command allows you to define rule...
  • Page 799ACS Ruledef Configuration Mode Commands bearer 3gpp sgsn-address ▀ bearer 3gpp sgsn-address This command allows you to define rule expressions...
  • Page 800 ACS Ruledef Configuration Mode Commands ▀ bearer 3gpp2 bsid bearer 3gpp2 bsid This command allows you to define rule...
  • Page 801ACS Ruledef Configuration Mode Commands bearer 3gpp2 bsid ▀ If the use-group-of-objects keyword is included in the command, string must...
  • Page 802 ACS Ruledef Configuration Mode Commands ▀ bearer 3gpp2 service-option bearer 3gpp2 service-option This command allows you to define rule...
  • Page 803ACS Ruledef Configuration Mode Commands bearer apn ▀ bearer apn This command allows you to define rule expressions to match...
  • Page 804 ACS Ruledef Configuration Mode Commands ▀ bearer apn apn_name must be the name of an APN, and must be...
  • Page 805ACS Ruledef Configuration Mode Commands bearer imsi ▀ bearer imsi This command allows you to define rule expressions to match...
  • Page 806 ACS Ruledef Configuration Mode Commands ▀ bearer imsi Usage Use this command to define rule expressions to match IMSI...
  • Page 807ACS Ruledef Configuration Mode Commands bearer rat-type ▀ bearer rat-type This command allows you to define rule expressions to match...
  • Page 808 ACS Ruledef Configuration Mode Commands ▀ bearer sgsn-address bearer sgsn-address This command allows you to define rule expressions to...
  • Page 809ACS Ruledef Configuration Mode Commands bearer traffic-group ▀ bearer traffic-group This command allows you to define rule expressions to match...
  • Page 810 ACS Ruledef Configuration Mode Commands ▀ bearer traffic-group bearer traffic-group >= 23 ▄ Command Line Interface Reference, StarOS Release...
  • Page 811ACS Ruledef Configuration Mode Commands cca quota-state ▀ cca quota-state Specifies the quota state of a subscriber for prepaid credit...
  • Page 812 ACS Ruledef Configuration Mode Commands ▀ cca quota-state The following command defines a rule expression to match user traffic...
  • Page 813ACS Ruledef Configuration Mode Commands cca redirect-indicator ▀ cca redirect-indicator This command allows you to define rule expressions to match...
  • Page 814 ACS Ruledef Configuration Mode Commands ▀ cca redirect-indicator that is returned by the RADIUS prepaid server for a quota...
  • Page 815ACS Ruledef Configuration Mode Commands copy-packet-to-log ▀ copy-packet-to-log This command allows you to print every packet that hits the current...
  • Page 816 ACS Ruledef Configuration Mode Commands ▀ description description Allows you to enter descriptive text for this configuration. Product All...
  • Page 817ACS Ruledef Configuration Mode Commands dns answer-name ▀ dns answer-name This command allows you to define rule expressions to match...
  • Page 818 ACS Ruledef Configuration Mode Commands ▀ dns answer-name Usage Use this command to define rule expressions to match an...
  • Page 819ACS Ruledef Configuration Mode Commands dns any-match ▀ dns any-match This command allows you to define rule expressions to match...
  • Page 820 ACS Ruledef Configuration Mode Commands ▀ dns previous-state dns previous-state This command allows you to define rule expressions to...
  • Page 821ACS Ruledef Configuration Mode Commands dns query-name ▀ dns query-name This command allows you to define rule expressions to match...
  • Page 822 ACS Ruledef Configuration Mode Commands ▀ dns query-name Usage Use this command to define rule expressions to match query...
  • Page 823ACS Ruledef Configuration Mode Commands dns return-code ▀ dns return-code This command allows you to define rule expressions to match...
  • Page 824 ACS Ruledef Configuration Mode Commands ▀ dns state dns state This command allows you to define rule expressions to...
  • Page 825ACS Ruledef Configuration Mode Commands dns tid ▀ dns tid This command allows you to define rule expressions to match...
  • Page 826 ACS Ruledef Configuration Mode Commands ▀ email email This command allows you to define rule expressions to match generic...
  • Page 827ACS Ruledef Configuration Mode Commands email ▀ operator Specifies how to match. operator must be one of the following except...
  • Page 828 ACS Ruledef Configuration Mode Commands ▀ end end Exits the current configuration mode and returns to the Exec mode....
  • Page 829ACS Ruledef Configuration Mode Commands exit ▀ exit Exits the current mode and returns to the parent configuration mode. Product...
  • Page 830 ACS Ruledef Configuration Mode Commands ▀ file-transfer any-match file-transfer any-match This command allows you to define rule expressions to...
  • Page 831ACS Ruledef Configuration Mode Commands file-transfer chunk-number ▀ file-transfer chunk-number This command allows you to define rule expressions to match...
  • Page 832 ACS Ruledef Configuration Mode Commands ▀ file-transfer current-chunk-length file-transfer current-chunk-length This command allows you to define rule expressions to...
  • Page 833ACS Ruledef Configuration Mode Commands file-transfer declared-chunk-length ▀ file-transfer declared-chunk-length This command allows you to define rule expressions to match...
  • Page 834 ACS Ruledef Configuration Mode Commands ▀ file-transfer declared-file-size file-transfer declared-file-size This command allows you to define rule expressions to...
  • Page 835ACS Ruledef Configuration Mode Commands file-transfer filename ▀ file-transfer filename This command allows you to define rule expressions to match...
  • Page 836 ACS Ruledef Configuration Mode Commands ▀ file-transfer filename Usage Use this command to define rule expressions to match file...
  • Page 837ACS Ruledef Configuration Mode Commands file-transfer previous-state ▀ file-transfer previous-state This command allows you to define rule expressions to match...
  • Page 838 ACS Ruledef Configuration Mode Commands ▀ file-transfer state file-transfer state This command allows you to define rule expressions to...
  • Page 839ACS Ruledef Configuration Mode Commands file-transfer state ▀ Event init request-sent transfer- transfer- ok err HTTP 4xx or HTTP 5xx...
  • Page 840 ACS Ruledef Configuration Mode Commands ▀ file-transfer transferred-file-size file-transfer transferred-file-size This command allows you to define rule expressions to...
  • Page 841ACS Ruledef Configuration Mode Commands ftp any-match ▀ ftp any-match This command allows you to define rule expressions to match...
  • Page 842 ACS Ruledef Configuration Mode Commands ▀ ftp client-ip-address ftp client-ip-address This command allows you to define rule expressions to...
  • Page 843ACS Ruledef Configuration Mode Commands ftp client-port ▀ ftp client-port This command allows you to define rule expressions to match...
  • Page 844 ACS Ruledef Configuration Mode Commands ▀ ftp command args ftp command args This command allows you to define rule...
  • Page 845ACS Ruledef Configuration Mode Commands ftp command args ▀ Example The following command defines a rule expression to match argument...
  • Page 846 ACS Ruledef Configuration Mode Commands ▀ ftp command id ftp command id This command allows you to define rule...
  • Page 847ACS Ruledef Configuration Mode Commands ftp command name ▀ ftp command name This command allows you to define rule expressions...
  • Page 848 ACS Ruledef Configuration Mode Commands ▀ ftp command name  stor: Store command  stru: File structure command ...
  • Page 849ACS Ruledef Configuration Mode Commands ftp connection-type ▀ ftp connection-type This command allows you to define rule expressions to match...
  • Page 850 ACS Ruledef Configuration Mode Commands ▀ ftp data-any-match ftp data-any-match This command allows you to define rule expressions to...
  • Page 851ACS Ruledef Configuration Mode Commands ftp filename ▀ ftp filename This command allows you to define rule expressions to match...
  • Page 852 ACS Ruledef Configuration Mode Commands ▀ ftp filename Usage Use this command to define rule expressions to match an...
  • Page 853ACS Ruledef Configuration Mode Commands ftp pdu-length ▀ ftp pdu-length This command allows you to define rule expressions to match...
  • Page 854 ACS Ruledef Configuration Mode Commands ▀ ftp pdu-type ftp pdu-type This command allows you to define rule expressions to...
  • Page 855ACS Ruledef Configuration Mode Commands ftp previous-state ▀ ftp previous-state This command allows you to define rule expressions to match...
  • Page 856 ACS Ruledef Configuration Mode Commands ▀ ftp reply code ftp reply code This command allows you to define rule...
  • Page 857ACS Ruledef Configuration Mode Commands ftp server-ip-address ▀ ftp server-ip-address This command allows you to define rule expressions to match...
  • Page 858 ACS Ruledef Configuration Mode Commands ▀ ftp server-port ftp server-port This command allows you to define rule expressions to...
  • Page 859ACS Ruledef Configuration Mode Commands ftp session-length ▀ ftp session-length This command allows you to define rule expressions to match...
  • Page 860 ACS Ruledef Configuration Mode Commands ▀ ftp state ftp state This command allows you to define rule expressions to...
  • Page 861ACS Ruledef Configuration Mode Commands ftp url ▀ ftp url This command allows you to define rule expressions to match...
  • Page 862 ACS Ruledef Configuration Mode Commands ▀ ftp url Example The following command defines a rule expression to match the...
  • Page 863ACS Ruledef Configuration Mode Commands ftp user ▀ ftp user This command allows you to define rule expressions to match...
  • Page 864 ACS Ruledef Configuration Mode Commands ▀ ftp user Usage Use this command to define rule expressions to match a...
  • Page 865ACS Ruledef Configuration Mode Commands http any-match ▀ http any-match This command allows you to define rule expressions to match...
  • Page 866 ACS Ruledef Configuration Mode Commands ▀ http attribute-in-data http attribute-in-data This command allows you to define rule expressions to...
  • Page 867ACS Ruledef Configuration Mode Commands http attribute-in-data ▀ Usage Use this command to define rule expressions to match arbitrary attribute...
  • Page 868 ACS Ruledef Configuration Mode Commands ▀ http attribute-in-url http attribute-in-url This command allows you to define rule expressions to...
  • Page 869ACS Ruledef Configuration Mode Commands http attribute-in-url ▀ Usage Use this command to configure rule expression to match an arbitrary...
  • Page 870 ACS Ruledef Configuration Mode Commands ▀ http content disposition http content disposition This command allows you to define rule...
  • Page 871ACS Ruledef Configuration Mode Commands http content disposition ▀ Usage Use this command to define rule expressions to match optional...
  • Page 872 ACS Ruledef Configuration Mode Commands ▀ http content length http content length This command allows you to define rule...
  • Page 873ACS Ruledef Configuration Mode Commands http content range ▀ http content range This command allows you to define rule expressions...
  • Page 874 ACS Ruledef Configuration Mode Commands ▀ http content type http content type This command allows you to define rule...
  • Page 875ACS Ruledef Configuration Mode Commands http content type ▀ Usage Use this command to define rule expressions to match value...
  • Page 876 ACS Ruledef Configuration Mode Commands ▀ http cookie http cookie This command allows you to define rule expressions to...
  • Page 877ACS Ruledef Configuration Mode Commands http cookie ▀ The cookie match ruleline can be combined with other rulelines having different...
  • Page 878 ACS Ruledef Configuration Mode Commands ▀ http domain http domain This command allows you to define rule expressions to...
  • Page 879ACS Ruledef Configuration Mode Commands http domain ▀ From the URL, after http:// (if present) is removed, everything until the...
  • Page 880 ACS Ruledef Configuration Mode Commands ▀ http error http error This command allows you to define rule expressions to...
  • Page 881ACS Ruledef Configuration Mode Commands http error ▀ http error = TRUE Command Line Interface Reference, StarOS Release 17 ▄...
  • Page 882 ACS Ruledef Configuration Mode Commands ▀ http first-request-packet http first-request-packet This command allows you to define rule expressions to...
  • Page 883ACS Ruledef Configuration Mode Commands http header-length ▀ http header-length This command allows you to define rule expressions to match...
  • Page 884 ACS Ruledef Configuration Mode Commands ▀ http host http host This command allows you to define rule expressions to...
  • Page 885 ACS Ruledef Configuration Mode Commands http host ▀ Usage Use this command to define rule expressions to match value in...
  • Page 886 ACS Ruledef Configuration Mode Commands ▀ http host Regex Character Description .\x## Any ASCII character as specified in two-digit...
  • Page 887ACS Ruledef Configuration Mode Commands http payload-length ▀ http payload-length This command allows you to define rule expressions to match...
  • Page 888 ACS Ruledef Configuration Mode Commands ▀ http pdu-length http pdu-length This command allows you to define rule expressions to...
  • Page 889ACS Ruledef Configuration Mode Commands http previous-state ▀ http previous-state This command allows you to define rule expressions to match...
  • Page 890 ACS Ruledef Configuration Mode Commands ▀ http referer http referer This command allows you to define rule expressions to...
  • Page 891 ACS Ruledef Configuration Mode Commands http referer ▀ Usage Use this command to define rule expressions to match value in...
  • Page 892 ACS Ruledef Configuration Mode Commands ▀ http referer Regex Character Description \\ Match the backslash character Bracketed range [0-...
  • Page 893ACS Ruledef Configuration Mode Commands http reply code ▀ http reply code This command allows you to define rule expressions...
  • Page 894 ACS Ruledef Configuration Mode Commands ▀ http reply payload http reply payload This command allows you to define rule...
  • Page 895ACS Ruledef Configuration Mode Commands http request method ▀ http request method This command allows you to define rule expressions...
  • Page 896 ACS Ruledef Configuration Mode Commands ▀ http request method The following command defines a rule expression to match user...
  • Page 897ACS Ruledef Configuration Mode Commands http session-length ▀ http session-length This command allows you to define rule expressions to match...
  • Page 898 ACS Ruledef Configuration Mode Commands ▀ http state http state This command allows you to define rule expressions to...
  • Page 899ACS Ruledef Configuration Mode Commands http transaction-length ▀ http transaction-length This command allows you to define rule expressions to match...
  • Page 900 ACS Ruledef Configuration Mode Commands ▀ http transaction-length Usage Use this command to define rule expressions to match an...
  • Page 901ACS Ruledef Configuration Mode Commands http transfer-encoding ▀ http transfer-encoding This command allows you to define rule expressions to match...
  • Page 902 ACS Ruledef Configuration Mode Commands ▀ http transfer-encoding Usage Use this command to define rule expressions to match the...
  • Page 903ACS Ruledef Configuration Mode Commands http uri ▀ http uri This command allows you to define rule expressions to match...
  • Page 904 ACS Ruledef Configuration Mode Commands ▀ http uri Usage Use this command to define rule expressions to match an...
  • Page 905 ACS Ruledef Configuration Mode Commands http uri ▀ Regex Character Description | Specify OR regular expression operator Important: When...
  • Page 906 ACS Ruledef Configuration Mode Commands ▀ http url http url This command allows you to define rule expressions to...
  • Page 907 ACS Ruledef Configuration Mode Commands http url ▀ Hypertext Transfer Protocol GET / HTTP/1.1\r\n Request Method: GET Request URI: /...
  • Page 908 ACS Ruledef Configuration Mode Commands ▀ http url Regex Character Description \* Match the asterisk character \a Match the...
  • Page 909ACS Ruledef Configuration Mode Commands http user-agent ▀ http user-agent This command allows you to define rule expressions to match...
  • Page 910 ACS Ruledef Configuration Mode Commands ▀ http user-agent Usage Use this command to define rule expressions to match value...
  • Page 911ACS Ruledef Configuration Mode Commands http version ▀ http version This command allows you to define rule expressions to match...
  • Page 912 ACS Ruledef Configuration Mode Commands ▀ http version Usage Use this command to define rule expressions to match HTTP...
  • Page 913ACS Ruledef Configuration Mode Commands http x-header ▀ http x-header This command allows you to define rule expressions to match...
  • Page 914 ACS Ruledef Configuration Mode Commands ▀ http x-header Usage Use this command to define rule expressions to match specified...
  • Page 915ACS Ruledef Configuration Mode Commands icmp any-match ▀ icmp any-match This command allows you to define rule expressions to match...
  • Page 916 ACS Ruledef Configuration Mode Commands ▀ icmp code icmp code This command allows you to define rule expressions to...
  • Page 917ACS Ruledef Configuration Mode Commands icmp type ▀ icmp type This command allows you to define rule expressions to match...
  • Page 918 ACS Ruledef Configuration Mode Commands ▀ icmpv6 any-match icmpv6 any-match This command allows you to define rule expressions to...
  • Page 919ACS Ruledef Configuration Mode Commands icmpv6 code ▀ icmpv6 code This command allows you to define rule expressions to match...
  • Page 920 ACS Ruledef Configuration Mode Commands ▀ icmpv6 type icmpv6 type This command allows you to define rule expressions to...
  • Page 921ACS Ruledef Configuration Mode Commands if-protocol ▀ if-protocol This command allows you to associate different content IDs with the same...
  • Page 922 ACS Ruledef Configuration Mode Commands ▀ if-protocol Usage Use this command to associate different content IDs with the same...
  • Page 923ACS Ruledef Configuration Mode Commands imap any-match ▀ imap any-match This command allows you to define rule expressions to match...
  • Page 924 ACS Ruledef Configuration Mode Commands ▀ imap cc imap cc This command allows you to define rule expressions to...
  • Page 925ACS Ruledef Configuration Mode Commands imap cc ▀ Usage Use this command to define rule expressions to match recipient address...
  • Page 926 ACS Ruledef Configuration Mode Commands ▀ imap command imap command This command allows you to define rule expressions to...
  • Page 927ACS Ruledef Configuration Mode Commands imap command ▀  login  logout  lsub  noop  rename  search...
  • Page 928 ACS Ruledef Configuration Mode Commands ▀ imap content class imap content class This command allows you to define rule...
  • Page 929ACS Ruledef Configuration Mode Commands imap content class ▀ Usage Use this command to define rule expressions to match the...
  • Page 930 ACS Ruledef Configuration Mode Commands ▀ imap content type imap content type This command allows you to define rule...
  • Page 931ACS Ruledef Configuration Mode Commands imap content type ▀ Usage Use this command to define rule expressions to match the...
  • Page 932 ACS Ruledef Configuration Mode Commands ▀ imap date imap date This command allows you to define rule expressions to...
  • Page 933ACS Ruledef Configuration Mode Commands imap date ▀ Usage Use this command to define rule expressions to match the date...
  • Page 934 ACS Ruledef Configuration Mode Commands ▀ imap final-reply imap final-reply This command allows you to define rule expressions to...
  • Page 935ACS Ruledef Configuration Mode Commands imap from ▀ imap from This command allows you to define rule expressions to match...
  • Page 936 ACS Ruledef Configuration Mode Commands ▀ imap from Example The following command defines a rule expression to analyze user...
  • Page 937ACS Ruledef Configuration Mode Commands imap mail-size ▀ imap mail-size This command allows you to define rule expressions to match...
  • Page 938 ACS Ruledef Configuration Mode Commands ▀ imap mailbox-size imap mailbox-size This command allows you to define rule expressions to...
  • Page 939ACS Ruledef Configuration Mode Commands imap message-type ▀ imap message-type This command allows you to define rule expressions to match...
  • Page 940 ACS Ruledef Configuration Mode Commands ▀ imap previous-state imap previous-state This command allows you to define rule expressions to...
  • Page 941ACS Ruledef Configuration Mode Commands imap session-length ▀ imap session-length This command allows you to define rule expressions to match...
  • Page 942 ACS Ruledef Configuration Mode Commands ▀ imap session-previous-state imap session-previous-state This command allows you to define rule expressions to...
  • Page 943ACS Ruledef Configuration Mode Commands imap session-state ▀ imap session-state This command allows you to define rule expressions to match...
  • Page 944 ACS Ruledef Configuration Mode Commands ▀ imap state imap state This command allows you to define rule expressions to...
  • Page 945ACS Ruledef Configuration Mode Commands imap subject ▀ imap subject This command allows you to define rule expressions to match...
  • Page 946 ACS Ruledef Configuration Mode Commands ▀ imap subject Usage Use this command to define rule expressions to match “subject”...
  • Page 947ACS Ruledef Configuration Mode Commands imap to ▀ imap to This command allows you to define rule expressions to match...
  • Page 948 ACS Ruledef Configuration Mode Commands ▀ imap to Example The following command defines a rule expression to analyze user...
  • Page 949ACS Ruledef Configuration Mode Commands ip any-match ▀ ip any-match This command allows you to define rule expressions to match...
  • Page 950 ACS Ruledef Configuration Mode Commands ▀ ip dscp ip dscp This command enables you to configure a ruledef with...
  • Page 951ACS Ruledef Configuration Mode Commands ip downlink ▀ ip downlink This command allows you to define rule expressions to match...
  • Page 952 ACS Ruledef Configuration Mode Commands ▀ ip dst-address ip dst-address This command allows you to define rule expressions to...
  • Page 953ACS Ruledef Configuration Mode Commands ip dst-address ▀ Usage Use this command to define rule expressions to match the IP...
  • Page 954 ACS Ruledef Configuration Mode Commands ▀ ip error ip error This command allows you to define rule expressions to...
  • Page 955ACS Ruledef Configuration Mode Commands ip protocol ▀ ip protocol This command allows you to define rule expressions to match...
  • Page 956 ACS Ruledef Configuration Mode Commands ▀ ip protocol  udp Usage Use this command to define rule expressions to...
  • Page 957ACS Ruledef Configuration Mode Commands ip server-domain-name ▀ ip server-domain-name This command allows you to define rule expressions to match...
  • Page 958 ACS Ruledef Configuration Mode Commands ▀ ip server-ip-address ip server-ip-address This command allows you to define rule expressions to...
  • Page 959ACS Ruledef Configuration Mode Commands ip server-ip-address ▀  !range: Not in the range of  range: In the range...
  • Page 960 ACS Ruledef Configuration Mode Commands ▀ ip src-address ip src-address This command allows you to define rule expressions to...
  • Page 961ACS Ruledef Configuration Mode Commands ip src-address ▀ host-pool host_pool_name: Specifies name of the host pool. host_pool_name must be a...
  • Page 962 ACS Ruledef Configuration Mode Commands ▀ ip subscriber-ip-address ip subscriber-ip-address This command allows you to define rule expressions to...
  • Page 963ACS Ruledef Configuration Mode Commands ip subscriber-ip-address ▀  range: In the range of host-pool host_pool_name: Specifies the name of...
  • Page 964 ACS Ruledef Configuration Mode Commands ▀ ip total-length ip total-length This command allows you to define rule expressions to...
  • Page 965ACS Ruledef Configuration Mode Commands ip uplink ▀ ip uplink This command allows you to define rule expressions to match...
  • Page 966 ACS Ruledef Configuration Mode Commands ▀ ip version ip version This command allows you to define rule expressions to...
  • Page 967ACS Ruledef Configuration Mode Commands mms any-match ▀ mms any-match This command allows you to define rule expressions to match...
  • Page 968 ACS Ruledef Configuration Mode Commands ▀ mms bcc mms bcc This command allows you to define rule expressions to...
  • Page 969ACS Ruledef Configuration Mode Commands mms bcc ▀ Usage Use this command to define rule expressions to match recipient address...
  • Page 970 ACS Ruledef Configuration Mode Commands ▀ mms cc mms cc This command allows you to define rule expressions to...
  • Page 971ACS Ruledef Configuration Mode Commands mms cc ▀ Usage Use this command to define rule expressions to match recipient addresses...
  • Page 972 ACS Ruledef Configuration Mode Commands ▀ mms content location mms content location This command allows you to define rule...
  • Page 973ACS Ruledef Configuration Mode Commands mms content location ▀ Usage Use this command to define rule expressions to match the...
  • Page 974 ACS Ruledef Configuration Mode Commands ▀ mms content type mms content type This command allows you to define rule...
  • Page 975ACS Ruledef Configuration Mode Commands mms content type ▀ Usage Use this command to define rule expressions to match content-type...
  • Page 976 ACS Ruledef Configuration Mode Commands ▀ mms downlink mms downlink This command allows you to define rule expressions to...
  • Page 977ACS Ruledef Configuration Mode Commands mms from ▀ mms from This command allows you to define rule expressions to match...
  • Page 978 ACS Ruledef Configuration Mode Commands ▀ mms from Usage Use this command to define rule expressions to match the...
  • Page 979ACS Ruledef Configuration Mode Commands mms message-id ▀ mms message-id This command allows you to define rule expressions to match...
  • Page 980 ACS Ruledef Configuration Mode Commands ▀ mms message-id Usage Use this command to define rule expressions to match the...
  • Page 981ACS Ruledef Configuration Mode Commands mms pdu-type ▀ mms pdu-type This command allows you to define rule expressions to match...
  • Page 982 ACS Ruledef Configuration Mode Commands ▀ mms pdu-type Usage Use this command to define rule expressions to match the...
  • Page 983ACS Ruledef Configuration Mode Commands mms previous-state ▀ mms previous-state This command allows you to define rule expressions to match...
  • Page 984 ACS Ruledef Configuration Mode Commands ▀ mms previous-state Usage Use this command to define rule expressions to match the...
  • Page 985ACS Ruledef Configuration Mode Commands mms response status ▀ mms response status This command allows you to define rule expressions...
  • Page 986 ACS Ruledef Configuration Mode Commands ▀ mms state mms state This command allows you to define rule expressions to...
  • Page 987ACS Ruledef Configuration Mode Commands mms state ▀  retrieval-success  retrieve-conf-received  send-success Usage Use this command to define...
  • Page 988 ACS Ruledef Configuration Mode Commands ▀ mms status mms status This command allows you to define rule expressions to...
  • Page 989ACS Ruledef Configuration Mode Commands mms subject ▀ mms subject This command allows you to define rule expressions to match...
  • Page 990 ACS Ruledef Configuration Mode Commands ▀ mms subject Usage Use this command to define rule expressions to match “subject”...
  • Page 991ACS Ruledef Configuration Mode Commands mms tid ▀ mms tid This command allows you to define rule expressions to match...
  • Page 992 ACS Ruledef Configuration Mode Commands ▀ mms tid Usage Use this command to define rule expressions to match TID...
  • Page 993ACS Ruledef Configuration Mode Commands mms to ▀ mms to This command allows you to define rule expressions to match...
  • Page 994 ACS Ruledef Configuration Mode Commands ▀ mms to Usage Use this command to define rule expressions to match “to”...
  • Page 995ACS Ruledef Configuration Mode Commands mms uplink ▀ mms uplink This command allows you to define rule expressions to match...
  • Page 996 ACS Ruledef Configuration Mode Commands ▀ mms version mms version This command allows you to define rule expressions to...
  • Page 997ACS Ruledef Configuration Mode Commands multi-line-or all-lines ▀ multi-line-or all-lines This command applies the OR operator to all lines in...
  • Page 998 ACS Ruledef Configuration Mode Commands ▀ p2p any-match p2p any-match This command allows you to define rule expressions to...
  • Page 999ACS Ruledef Configuration Mode Commands p2p behavioral ▀ p2p behavioral This command allows you to define rule expressions to match...
  • Page 1000 ACS Ruledef Configuration Mode Commands ▀ p2p behavioral disabled by default and meant only for statistical purposes (not for...
  • Page 1001ACS Ruledef Configuration Mode Commands p2p protocol ▀ p2p protocol This command allows you to define rule expressions to match...
  • Page 1002 ACS Ruledef Configuration Mode Commands ▀ p2p protocol  avi  badoo  baidumovie  battlefld  bbm ...
  • Page 1003ACS Ruledef Configuration Mode Commands p2p protocol ▀  filetopia  flash  flickr  florensia  foursquare  freenet...
  • Page 1004 ACS Ruledef Configuration Mode Commands ▀ p2p protocol  icloud  idrive  igo  iheartradio  imesh ...
  • Page 1005ACS Ruledef Configuration Mode Commands p2p protocol ▀  msn  msrp  mute  mypeople  myspace  nateontalk...
  • Page 1006 ACS Ruledef Configuration Mode Commands ▀ p2p protocol  qqgame  qqlive  quake  quicktime  radio-paradise ...
  • Page 1007ACS Ruledef Configuration Mode Commands p2p protocol ▀  steam  stun  sudaphone  svtplay  tagged  talkatone...
  • Page 1008 ACS Ruledef Configuration Mode Commands ▀ p2p protocol  waze  webex  wechat  weibo  whatsapp ...
  • Page 1009ACS Ruledef Configuration Mode Commands p2p protocol-group ▀ p2p protocol-group This command allows you to define rule expressions to match...
  • Page 1010 ACS Ruledef Configuration Mode Commands ▀ p2p protocol-group  p2p-anon-filesharing: Peer to Peer application/protocols used for anonymous filesharing. ...
  • Page 1011ACS Ruledef Configuration Mode Commands p2p traffic-type ▀ p2p traffic-type This command allows you to define rule expressions to match...
  • Page 1012 ACS Ruledef Configuration Mode Commands ▀ p2p traffic-type The following command configures the system to detect video traffic: p2p...
  • Page 1013ACS Ruledef Configuration Mode Commands pop3 any-match ▀ pop3 any-match This command allows you to define rule expressions to match...
  • Page 1014 ACS Ruledef Configuration Mode Commands ▀ pop3 command args pop3 command args This command allows you to define rule...
  • Page 1015ACS Ruledef Configuration Mode Commands pop3 command args ▀ Usage Use this command to define rule expressions to match POP3...
  • Page 1016 ACS Ruledef Configuration Mode Commands ▀ pop3 command id pop3 command id This command allows you to define rule...
  • Page 1017ACS Ruledef Configuration Mode Commands pop3 command name ▀ pop3 command name This command allows you to define rule expressions...
  • Page 1018 ACS Ruledef Configuration Mode Commands ▀ pop3 command name Usage Use this command to define rule expressions to match...
  • Page 1019ACS Ruledef Configuration Mode Commands pop3 mail-size ▀ pop3 mail-size This command allows you to define rule expressions to match...
  • Page 1020 ACS Ruledef Configuration Mode Commands ▀ pop3 mail-size Usage Use this command to define rule expressions to match POP3...
  • Page 1021ACS Ruledef Configuration Mode Commands pop3 pdu-length ▀ pop3 pdu-length This command allows you to define rule expressions to match...
  • Page 1022 ACS Ruledef Configuration Mode Commands ▀ pop3 pdu-length Usage Use this command to define rule expressions to match POP3...
  • Page 1023ACS Ruledef Configuration Mode Commands pop3 pdu-type ▀ pop3 pdu-type This command allows you to define rule expressions to match...
  • Page 1024 ACS Ruledef Configuration Mode Commands ▀ pop3 previous-state pop3 previous-state This command allows you to define rule expressions to...
  • Page 1025ACS Ruledef Configuration Mode Commands pop3 reply args ▀ pop3 reply args This command allows you to define rule expressions...
  • Page 1026 ACS Ruledef Configuration Mode Commands ▀ pop3 reply args Usage Use this command to define rule expressions to match...
  • Page 1027ACS Ruledef Configuration Mode Commands pop3 reply id ▀ pop3 reply id This command allows you to define rule expressions...
  • Page 1028 ACS Ruledef Configuration Mode Commands ▀ pop3 reply status pop3 reply status This command allows you to define rule...
  • Page 1029ACS Ruledef Configuration Mode Commands pop3 session-length ▀ pop3 session-length This command allows you to define rule expressions to match...
  • Page 1030 ACS Ruledef Configuration Mode Commands ▀ pop3 session-length Usage Use this command to define rule expressions to match the...
  • Page 1031ACS Ruledef Configuration Mode Commands pop3 state ▀ pop3 state This command allows you to define rule expressions to match...
  • Page 1032 ACS Ruledef Configuration Mode Commands ▀ pop3 user-name pop3 user-name This command allows you to define rule expressions to...
  • Page 1033ACS Ruledef Configuration Mode Commands pop3 user-name ▀ Usage Use this command to define rule expressions to match POP3 user...
  • Page 1034 ACS Ruledef Configuration Mode Commands ▀ pptp any-match pptp any-match This command allows you to defines a rule expression...
  • Page 1035ACS Ruledef Configuration Mode Commands pptp ctrl-msg-type ▀ pptp ctrl-msg-type This command allows you to define rule expressions to match...
  • Page 1036 ACS Ruledef Configuration Mode Commands ▀ pptp ctrl-msg-type Example The following command specifies to match echo-reply message type: pptp...
  • Page 1037ACS Ruledef Configuration Mode Commands pptp gre any-match ▀ pptp gre any-match This command allows you to define rule expressions...
  • Page 1038 ACS Ruledef Configuration Mode Commands ▀ radius any-match radius any-match This command allows you to define rule expressions to...
  • Page 1039ACS Ruledef Configuration Mode Commands radius error ▀ radius error This command allows you to define rule expressions to match...
  • Page 1040 ACS Ruledef Configuration Mode Commands ▀ radius state radius state This command allows you to define rule expressions to...
  • Page 1041ACS Ruledef Configuration Mode Commands rtcp any-match ▀ rtcp any-match This command allows you to define rule expressions to match...
  • Page 1042 ACS Ruledef Configuration Mode Commands ▀ rtcp jitter rtcp jitter This command allows you to define rule expressions to...
  • Page 1043ACS Ruledef Configuration Mode Commands rtcp parent-proto ▀ rtcp parent-proto This command allows you to define rule expressions to match...
  • Page 1044 ACS Ruledef Configuration Mode Commands ▀ rtcp pdu-length rtcp pdu-length This command allows you to define rule expressions to...
  • Page 1045ACS Ruledef Configuration Mode Commands rtcp rtsp-id ▀ rtcp rtsp-id This command allows you to define rule expressions to match...
  • Page 1046 ACS Ruledef Configuration Mode Commands ▀ rtcp rtsp-id Usage Use this command to define rule expressions to match an...
  • Page 1047ACS Ruledef Configuration Mode Commands rtcp session-length ▀ rtcp session-length This command allows you to define rule expressions to match...
  • Page 1048 ACS Ruledef Configuration Mode Commands ▀ rtcp uri rtcp uri This command allows you to define rule expressions to...
  • Page 1049ACS Ruledef Configuration Mode Commands rtcp uri ▀ Example The following command defines a rule expression to match user traffic...
  • Page 1050 ACS Ruledef Configuration Mode Commands ▀ rtp any-match rtp any-match This command allows you to define rule expressions to...
  • Page 1051ACS Ruledef Configuration Mode Commands rtp parent-proto ▀ rtp parent-proto This command allows you to define rule expressions to match...
  • Page 1052 ACS Ruledef Configuration Mode Commands ▀ rtp pdu-length rtp pdu-length This command allows you to define rule expressions to...
  • Page 1053ACS Ruledef Configuration Mode Commands rtp rtsp-id ▀ rtp rtsp-id This command allows you to define rule expressions to match...
  • Page 1054 ACS Ruledef Configuration Mode Commands ▀ rtp rtsp-id Example The following command defines a rule expression to match RTSP...
  • Page 1055ACS Ruledef Configuration Mode Commands rtp session-length ▀ rtp session-length This command allows you to define rule expressions to match...
  • Page 1056 ACS Ruledef Configuration Mode Commands ▀ rtp uri rtp uri This command allows you to define rule expressions to...
  • Page 1057ACS Ruledef Configuration Mode Commands rtp uri ▀ Usage Use this command to define rule expressions to match media URI...
  • Page 1058 ACS Ruledef Configuration Mode Commands ▀ rtsp any-match rtsp any-match This command allows you to define rule expressions to...
  • Page 1059ACS Ruledef Configuration Mode Commands rtsp content length ▀ rtsp content length This command allows you to define rule expressions...
  • Page 1060 ACS Ruledef Configuration Mode Commands ▀ rtsp content type rtsp content type This command allows you to define rule...
  • Page 1061ACS Ruledef Configuration Mode Commands rtsp content type ▀ Usage Use this command to define rule expressions to match “content...
  • Page 1062 ACS Ruledef Configuration Mode Commands ▀ rtsp date rtsp date This command allows you to define rule expressions to...
  • Page 1063ACS Ruledef Configuration Mode Commands rtsp date ▀ Example The following command defines a rule expression to match the date...
  • Page 1064 ACS Ruledef Configuration Mode Commands ▀ rtsp previous-state rtsp previous-state This command allows you to define rule expressions to...
  • Page 1065ACS Ruledef Configuration Mode Commands rtsp reply code ▀ rtsp reply code This command allows you to define rule expressions...
  • Page 1066 ACS Ruledef Configuration Mode Commands ▀ rtsp request method rtsp request method This command allows you to define rule...
  • Page 1067ACS Ruledef Configuration Mode Commands rtsp request method ▀ Usage Use this command to define rule expressions to match the...
  • Page 1068 ACS Ruledef Configuration Mode Commands ▀ rtsp request packet rtsp request packet This command allows you to define rule...
  • Page 1069ACS Ruledef Configuration Mode Commands rtsp rtp-seq ▀ rtsp rtp-seq This command allows you to define rule expressions to match...
  • Page 1070 ACS Ruledef Configuration Mode Commands ▀ rtsp rtp-time rtsp rtp-time This command allows you to define rule expressions to...
  • Page 1071ACS Ruledef Configuration Mode Commands rtsp rtp-uri ▀ rtsp rtp-uri This command allows you to define rule expressions to match...
  • Page 1072 ACS Ruledef Configuration Mode Commands ▀ rtsp rtp-uri Usage Use this command to define rule expressions to match the...
  • Page 1073ACS Ruledef Configuration Mode Commands rtsp session-id ▀ rtsp session-id This command allows you to define rule expressions to match...
  • Page 1074 ACS Ruledef Configuration Mode Commands ▀ rtsp session-id Example The following command defines a rule expression to match the...
  • Page 1075ACS Ruledef Configuration Mode Commands rtsp session-length ▀ rtsp session-length This command allows you to define rule expressions to match...
  • Page 1076 ACS Ruledef Configuration Mode Commands ▀ rtsp state rtsp state This command allows you to define rule expressions to...
  • Page 1077ACS Ruledef Configuration Mode Commands rtsp uri ▀ rtsp uri This command allows you to define rule expressions to match...
  • Page 1078 ACS Ruledef Configuration Mode Commands ▀ rtsp uri Usage Use this command to define rule expressions to match URI...
  • Page 1079 ACS Ruledef Configuration Mode Commands rtsp uri ▀ Regex Character Description | Specify OR regular expression operator Important: When...
  • Page 1080 ACS Ruledef Configuration Mode Commands ▀ rtsp uri sub-part rtsp uri sub-part This command allows you to define rule...
  • Page 1081ACS Ruledef Configuration Mode Commands rtsp uri sub-part ▀  contains: Contains  ends-with: Ends with  starts-with: Starts with...
  • Page 1082 ACS Ruledef Configuration Mode Commands ▀ rtsp user-agent rtsp user-agent This command allows you to define rule expressions to...
  • Page 1083ACS Ruledef Configuration Mode Commands rtsp user-agent ▀ Example The following command defines a rule expression to match test in...
  • Page 1084 ACS Ruledef Configuration Mode Commands ▀ rtsp-stream any-match rtsp-stream any-match This command allows you to define rule expressions to...
  • Page 1085ACS Ruledef Configuration Mode Commands rtsp-stream first-setup-url ▀ rtsp-stream first-setup-url This command allows you to define rule expressions to match...
  • Page 1086 ACS Ruledef Configuration Mode Commands ▀ rtsp-stream first-setup-url Usage Use this command to specify a rule definition to analyze...
  • Page 1087 ACS Ruledef Configuration Mode Commands rtsp-stream first-setup-url ▀ Regex Character Description | Specify OR regular expression operator Important: When...
  • Page 1088 ACS Ruledef Configuration Mode Commands ▀ rule-application rule-application This command allows you to specify the purpose of a ruledef,...
  • Page 1089ACS Ruledef Configuration Mode Commands rule-application ▀ Usage Use this command to specify the rule application for a rule definition....
  • Page 1090 ACS Ruledef Configuration Mode Commands ▀ sdp any-match sdp any-match This command allows you to define rule expressions to...
  • Page 1091ACS Ruledef Configuration Mode Commands sdp connection-ip-address ▀ sdp connection-ip-address This command allows you to define rule expressions to match...
  • Page 1092 ACS Ruledef Configuration Mode Commands ▀ sdp media-audio-port sdp media-audio-port This command allows you to define rule expressions to...
  • Page 1093ACS Ruledef Configuration Mode Commands sdp media-video-port ▀ sdp media-video-port This command allows you to define rule expressions to match...
  • Page 1094 ACS Ruledef Configuration Mode Commands ▀ sdp uplink sdp uplink This command allows you to define rule expressions to...
  • Page 1095ACS Ruledef Configuration Mode Commands secure-http any-match ▀ secure-http any-match This command allows you to define rule expressions to match...
  • Page 1096 ACS Ruledef Configuration Mode Commands ▀ secure-http uplink secure-http uplink This command allows you to define rule expressions to...
  • Page 1097ACS Ruledef Configuration Mode Commands sip any-match ▀ sip any-match This command allows you to define rule expressions to match...
  • Page 1098 ACS Ruledef Configuration Mode Commands ▀ sip call-id sip call-id This command allows you to define rule expressions to...
  • Page 1099ACS Ruledef Configuration Mode Commands sip call-id ▀ Usage Use this command to define rule expressions to match the call...
  • Page 1100 ACS Ruledef Configuration Mode Commands ▀ sip content length sip content length This command allows you to define rule...
  • Page 1101ACS Ruledef Configuration Mode Commands sip content type ▀ sip content type This command allows you to define rule expressions...
  • Page 1102 ACS Ruledef Configuration Mode Commands ▀ sip content type Example The following command defines a rule expression to match...
  • Page 1103ACS Ruledef Configuration Mode Commands sip from ▀ sip from This command allows you to define rule expressions to match...
  • Page 1104 ACS Ruledef Configuration Mode Commands ▀ sip from Example The following command defines a rule expression to match test1...
  • Page 1105ACS Ruledef Configuration Mode Commands sip previous-state ▀ sip previous-state This command allows you to define rule expressions to match...
  • Page 1106 ACS Ruledef Configuration Mode Commands ▀ sip reply code sip reply code This command allows you to define rule...
  • Page 1107ACS Ruledef Configuration Mode Commands sip request method ▀ sip request method This command allows you to define rule expressions...
  • Page 1108 ACS Ruledef Configuration Mode Commands ▀ sip request packet sip request packet This command allows you to define rule...
  • Page 1109ACS Ruledef Configuration Mode Commands sip state ▀ sip state This command allows you to define rule expressions to match...
  • Page 1110 ACS Ruledef Configuration Mode Commands ▀ sip to sip to This command allows you to define rule expressions to...
  • Page 1111ACS Ruledef Configuration Mode Commands sip to ▀ Usage Use this command to define rule expressions to match the “to”...
  • Page 1112 ACS Ruledef Configuration Mode Commands ▀ sip uri sip uri This command allows you to define rule expressions to...
  • Page 1113ACS Ruledef Configuration Mode Commands sip uri ▀  ends-with: Ends with  starts-with: Starts with The string for sub-part...
  • Page 1114 ACS Ruledef Configuration Mode Commands ▀ smtp any-match smtp any-match This command allows you to define rule expressions to...
  • Page 1115ACS Ruledef Configuration Mode Commands smtp command arguments ▀ smtp command arguments This command allows you to define rule expressions...
  • Page 1116 ACS Ruledef Configuration Mode Commands ▀ smtp command arguments Usage Use this command to define rule expressions to match...
  • Page 1117ACS Ruledef Configuration Mode Commands smtp command id ▀ smtp command id This command allows you to define rule expressions...
  • Page 1118 ACS Ruledef Configuration Mode Commands ▀ smtp command name smtp command name This command allows you to define rule...
  • Page 1119ACS Ruledef Configuration Mode Commands smtp command name ▀ Usage Use this command to define rule expressions to match commands...
  • Page 1120 ACS Ruledef Configuration Mode Commands ▀ smtp mail-size smtp mail-size This command allows you to define rule expressions to...
  • Page 1121ACS Ruledef Configuration Mode Commands smtp mail-size ▀ Usage Use this command to define rule expressions to match the size...
  • Page 1122 ACS Ruledef Configuration Mode Commands ▀ smtp pdu-length smtp pdu-length This command allows you to define rule expressions to...
  • Page 1123ACS Ruledef Configuration Mode Commands smtp pdu-length ▀ Usage Use this command to define rule expressions to match PDU length...
  • Page 1124 ACS Ruledef Configuration Mode Commands ▀ smtp previous-state smtp previous-state This command allows you to define rule expressions to...
  • Page 1125ACS Ruledef Configuration Mode Commands smtp recipient ▀ smtp recipient This command allows you to define rule expressions to match...
  • Page 1126 ACS Ruledef Configuration Mode Commands ▀ smtp recipient Usage Use this command to define rule expressions to match the...
  • Page 1127ACS Ruledef Configuration Mode Commands smtp reply arguments ▀ smtp reply arguments This command allows you to define rule expressions...
  • Page 1128 ACS Ruledef Configuration Mode Commands ▀ smtp reply arguments Usage Use this command to define rule expressions to match...
  • Page 1129ACS Ruledef Configuration Mode Commands smtp reply id ▀ smtp reply id This command allows you to define rule expressions...
  • Page 1130 ACS Ruledef Configuration Mode Commands ▀ smtp reply status smtp reply status This command allows you to define rule...
  • Page 1131ACS Ruledef Configuration Mode Commands smtp sender ▀ smtp sender This command allows you to define rule expressions to match...
  • Page 1132 ACS Ruledef Configuration Mode Commands ▀ smtp sender Example The following command defines a rule expression to match sender...
  • Page 1133ACS Ruledef Configuration Mode Commands smtp session-length ▀ smtp session-length This command allows you to define rule expressions to match...
  • Page 1134 ACS Ruledef Configuration Mode Commands ▀ smtp session-length Usage Use this command to define rule expressions to match total...
  • Page 1135ACS Ruledef Configuration Mode Commands smtp state ▀ smtp state This command allows you to define rule expressions to match...
  • Page 1136 ACS Ruledef Configuration Mode Commands ▀ tcp analyzed out-of-order tcp analyzed out-of-order This command allows you to define rule...
  • Page 1137ACS Ruledef Configuration Mode Commands tcp analyzed out-of-order ▀ If this command is enabled the TCP out-of-order packets are marked...
  • Page 1138 ACS Ruledef Configuration Mode Commands ▀ tcp any-match tcp any-match This command allows you to define rule expressions to...
  • Page 1139ACS Ruledef Configuration Mode Commands tcp connection-initiator ▀ tcp connection-initiator This command allows you to define rule expressions to match...
  • Page 1140 ACS Ruledef Configuration Mode Commands ▀ tcp downlink tcp downlink This command allows you to define rule expressions to...
  • Page 1141ACS Ruledef Configuration Mode Commands tcp dst-port ▀ tcp dst-port This command allows you to define rule expressions to match...
  • Page 1142 ACS Ruledef Configuration Mode Commands ▀ tcp dst-port port-map port_map_name Specifies the port map for the port range. port_map_name...
  • Page 1143ACS Ruledef Configuration Mode Commands tcp duplicate ▀ tcp duplicate This command allows you to define rule expressions to match...
  • Page 1144 ACS Ruledef Configuration Mode Commands ▀ tcp either-port tcp either-port This command allows you to define rule expressions to...
  • Page 1145ACS Ruledef Configuration Mode Commands tcp either-port ▀ port-map port_map_name Specifies the port map for the port range. port_map_name must...
  • Page 1146 ACS Ruledef Configuration Mode Commands ▀ tcp error tcp error This command allows you to define rule expressions to...
  • Page 1147ACS Ruledef Configuration Mode Commands tcp flag ▀ tcp flag This command allows you to define rule expressions to match...
  • Page 1148 ACS Ruledef Configuration Mode Commands ▀ tcp flag tcp flag = reset ▄ Command Line Interface Reference, StarOS Release...
  • Page 1149ACS Ruledef Configuration Mode Commands tcp initial-handshake-lost ▀ tcp initial-handshake-lost This command allows you to define rule expressions to match...
  • Page 1150 ACS Ruledef Configuration Mode Commands ▀ tcp payload tcp payload This command allows you to define rule expressions to...
  • Page 1151ACS Ruledef Configuration Mode Commands tcp payload-length ▀ tcp payload-length This command allows you to define rule expressions to match...
  • Page 1152 ACS Ruledef Configuration Mode Commands ▀ tcp previous-state tcp previous-state This command allows you to define rule expressions to...
  • Page 1153ACS Ruledef Configuration Mode Commands tcp previous-state ▀ Usage Use this command to define rule expressions to match a TCP...
  • Page 1154 ACS Ruledef Configuration Mode Commands ▀ tcp proxy-prev-state tcp proxy-prev-state This command allows you to define rule expressions to...
  • Page 1155ACS Ruledef Configuration Mode Commands tcp proxy-prev-state ▀ Usage If there is no TCP proxy configured, this configuration is not...
  • Page 1156 ACS Ruledef Configuration Mode Commands ▀ tcp proxy-state tcp proxy-state This command allows you to define rule expressions to...
  • Page 1157ACS Ruledef Configuration Mode Commands tcp proxy-state ▀ Usage If there is no TCP proxy configured, this configuration is not...
  • Page 1158 ACS Ruledef Configuration Mode Commands ▀ tcp session-length tcp session-length This command allows you to define rule expressions to...
  • Page 1159ACS Ruledef Configuration Mode Commands tcp src-port ▀ tcp src-port This command allows you to define rule expressions to match...
  • Page 1160 ACS Ruledef Configuration Mode Commands ▀ tcp src-port port-map port_map_name Specifies the port map for the port range. port_map_name...
  • Page 1161ACS Ruledef Configuration Mode Commands tcp state ▀ tcp state This command allows you to define rule expressions to match...
  • Page 1162 ACS Ruledef Configuration Mode Commands ▀ tcp state Usage Use this command to define rule expressions to match a...
  • Page 1163ACS Ruledef Configuration Mode Commands tcp uplink ▀ tcp uplink This command allows you to define rule expressions to match...
  • Page 1164 ACS Ruledef Configuration Mode Commands ▀ tethering-detection tethering-detection This command allows you to define rule expressions to match tethered...
  • Page 1165ACS Ruledef Configuration Mode Commands tethering-detection ▀ exit In this case, if for a packet only the rule line tethering-detection...
  • Page 1166 ACS Ruledef Configuration Mode Commands ▀ tftp any-match tftp any-match This command allows you to define rule expressions to...
  • Page 1167ACS Ruledef Configuration Mode Commands tftp data-any-match ▀ tftp data-any-match This command allows you to define rule expressions to match...
  • Page 1168 ACS Ruledef Configuration Mode Commands ▀ tls tls This command allows to configure TLS/SSL Server Name Indication (SNI) and...
  • Page 1169ACS Ruledef Configuration Mode Commands tls ▀ The following command configures the name of the corresponding protocol to facebook: tls...
  • Page 1170 ACS Ruledef Configuration Mode Commands ▀ udp any-match udp any-match This command allows you to define rule expressions to...
  • Page 1171ACS Ruledef Configuration Mode Commands udp downlink ▀ udp downlink This command allows you to define rule expressions to match...
  • Page 1172 ACS Ruledef Configuration Mode Commands ▀ udp dst-port udp dst-port This command allows you to define rule expressions to...
  • Page 1173ACS Ruledef Configuration Mode Commands udp dst-port ▀ port-map port_map_name Specifies the port map for the port range. port_map_name must...
  • Page 1174 ACS Ruledef Configuration Mode Commands ▀ udp either-port udp either-port This command allows you to define rule expressions to...
  • Page 1175ACS Ruledef Configuration Mode Commands udp either-port ▀ port-map port_map_name Specifies the port map for the port range. port_map_name must...
  • Page 1176 ACS Ruledef Configuration Mode Commands ▀ udp payload starts-with udp payload starts-with This command allows you to define rule...
  • Page 1177ACS Ruledef Configuration Mode Commands udp server-port ▀ udp server-port This command allows you to define rule expressions to match...
  • Page 1178 ACS Ruledef Configuration Mode Commands ▀ udp server-port port-map port_map_name Specifies the port map for the port range. port_map_name...
  • Page 1179ACS Ruledef Configuration Mode Commands udp src-port ▀ udp src-port This command allows you to define rule expressions to match...
  • Page 1180 ACS Ruledef Configuration Mode Commands ▀ udp src-port port-map port_map_name Specifies the port map for the port range. port_map_name...
  • Page 1181ACS Ruledef Configuration Mode Commands udp uplink ▀ udp uplink This command allows you to define rule expressions to match...
  • Page 1182 ACS Ruledef Configuration Mode Commands ▀ wsp any-match wsp any-match This command allows you to define rule expressions to...
  • Page 1183ACS Ruledef Configuration Mode Commands wsp content type ▀ wsp content type This command allows you to define rule expressions...
  • Page 1184 ACS Ruledef Configuration Mode Commands ▀ wsp content type Usage Use this command to define rule expressions to match...
  • Page 1185ACS Ruledef Configuration Mode Commands wsp domain ▀ wsp domain This command allows you to define rule expressions to match...
  • Page 1186 ACS Ruledef Configuration Mode Commands ▀ wsp domain From the URL, after http:// (if present) is removed, everything until...
  • Page 1187ACS Ruledef Configuration Mode Commands wsp downlink ▀ wsp downlink This command allows you to define rule expressions to match...
  • Page 1188 ACS Ruledef Configuration Mode Commands ▀ wsp first-request-packet wsp first-request-packet This command allows you to define rule expressions to...
  • Page 1189ACS Ruledef Configuration Mode Commands wsp host ▀ wsp host This command allows you to define rule expressions to match...
  • Page 1190 ACS Ruledef Configuration Mode Commands ▀ wsp host Usage Use this command to define rule expressions to match host...
  • Page 1191ACS Ruledef Configuration Mode Commands wsp pdu-length ▀ wsp pdu-length This command allows you to define rule expressions to match...
  • Page 1192 ACS Ruledef Configuration Mode Commands ▀ wsp pdu-type wsp pdu-type This command allows you to define rule expressions to...
  • Page 1193ACS Ruledef Configuration Mode Commands wsp pdu-type ▀  redirect  reply  resume  suspend  trace Usage Use...
  • Page 1194 ACS Ruledef Configuration Mode Commands ▀ wsp previous-state wsp previous-state This command allows you to define rule expressions to...
  • Page 1195ACS Ruledef Configuration Mode Commands wsp reply code ▀ wsp reply code This command allows you to define rule expressions...
  • Page 1196 ACS Ruledef Configuration Mode Commands ▀ wsp session-length wsp session-length This command allows you to define rule expressions to...
  • Page 1197ACS Ruledef Configuration Mode Commands wsp session-management ▀ wsp session-management This command allows you to define rule expressions to match...
  • Page 1198 ACS Ruledef Configuration Mode Commands ▀ wsp session-management  connected  connecting  init  resuming  suspended Usage...
  • Page 1199ACS Ruledef Configuration Mode Commands wsp state ▀ wsp state This command allows you to define rule expressions to match...
  • Page 1200 ACS Ruledef Configuration Mode Commands ▀ wsp status wsp status This command has been deprecated. See the wsp reply-code...
  • Page 1201ACS Ruledef Configuration Mode Commands wsp tid ▀ wsp tid This command allows you to define rule expressions to match...
  • Page 1202 ACS Ruledef Configuration Mode Commands ▀ wsp total-length wsp total-length This command has been deprecated. See the wsp session-length...
  • Page 1203ACS Ruledef Configuration Mode Commands wsp transfer-encoding ▀ wsp transfer-encoding This command allows you to define rule expressions to match...
  • Page 1204 ACS Ruledef Configuration Mode Commands ▀ wsp transfer-encoding The following command defines a rule expression to match user traffic...
  • Page 1205ACS Ruledef Configuration Mode Commands wsp uplink ▀ wsp uplink This command allows you to define rule expressions to match...
  • Page 1206 ACS Ruledef Configuration Mode Commands ▀ wsp url wsp url This command allows you to define rule expressions to...
  • Page 1207 ACS Ruledef Configuration Mode Commands wsp url ▀ Usage Use this command to define rule expressions to match the complete...
  • Page 1208 ACS Ruledef Configuration Mode Commands ▀ wsp url Regex Character Description | Specify OR regular expression operator Important: When...
  • Page 1209ACS Ruledef Configuration Mode Commands wsp user-agent ▀ wsp user-agent This command allows you to define rule expressions to match...
  • Page 1210 ACS Ruledef Configuration Mode Commands ▀ wsp user-agent Example The following command defines a rule expression to match value...
  • Page 1211ACS Ruledef Configuration Mode Commands wsp x-header ▀ wsp x-header This command allows you to define rule expressions to match...
  • Page 1212 ACS Ruledef Configuration Mode Commands ▀ wsp x-header Usage Use this command to configure any x-header field in WSP...
  • Page 1213ACS Ruledef Configuration Mode Commands wtp any-match ▀ wtp any-match This command allows you to define rule expressions to match...
  • Page 1214 ACS Ruledef Configuration Mode Commands ▀ wtp downlink wtp downlink This command allows you to define rule expressions to...
  • Page 1215ACS Ruledef Configuration Mode Commands wtp gtr ▀ wtp gtr This command allows you to define rule expressions to match...
  • Page 1216 ACS Ruledef Configuration Mode Commands ▀ wtp pdu-length wtp pdu-length This command allows you to define rule expressions to...
  • Page 1217ACS Ruledef Configuration Mode Commands wtp pdu-type ▀ wtp pdu-type This command allows you to define rule expressions to match...
  • Page 1218 ACS Ruledef Configuration Mode Commands ▀ wtp pdu-type wtp pdu-type = result ▄ Command Line Interface Reference, StarOS Release...
  • Page 1219ACS Ruledef Configuration Mode Commands wtp previous-state ▀ wtp previous-state This command allows you to define rule expressions to match...
  • Page 1220 ACS Ruledef Configuration Mode Commands ▀ wtp rid wtp rid This command allows you to define rule expressions to...
  • Page 1221ACS Ruledef Configuration Mode Commands wtp state ▀ wtp state This command allows you to define rule expressions to match...
  • Page 1222 ACS Ruledef Configuration Mode Commands ▀ wtp tid wtp tid This command allows you to define rule expressions to...
  • Page 1223ACS Ruledef Configuration Mode Commands wtp transaction class ▀ wtp transaction class This command allows you to define rule expressions...
  • Page 1224 ACS Ruledef Configuration Mode Commands ▀ wtp ttr wtp ttr This command allows you to define rule expressions to...
  • Page 1225ACS Ruledef Configuration Mode Commands wtp uplink ▀ wtp uplink This command allows you to define rule expressions to match...
  • Page 1226 ACS Ruledef Configuration Mode Commands ▀ www any-match www any-match This command allows you to define rule expressions to...
  • Page 1227ACS Ruledef Configuration Mode Commands www content type ▀ www content type This command allows you to define rule expressions...
  • Page 1228 ACS Ruledef Configuration Mode Commands ▀ www content type Usage Use this command to define rule expressions to match...
  • Page 1229ACS Ruledef Configuration Mode Commands www domain ▀ www domain This command allows you to define rule expressions to match...
  • Page 1230 ACS Ruledef Configuration Mode Commands ▀ www domain From the URL, after http:// (if present) is removed, everything until...
  • Page 1231ACS Ruledef Configuration Mode Commands www downlink ▀ www downlink This command allows you to define rule expressions to match...
  • Page 1232 ACS Ruledef Configuration Mode Commands ▀ www first-request-packet www first-request-packet This command allows you to define rule expressions to...
  • Page 1233ACS Ruledef Configuration Mode Commands www header-length ▀ www header-length This command allows you to define rule expressions to match...
  • Page 1234 ACS Ruledef Configuration Mode Commands ▀ www host www host This command allows you to define rule expressions to...
  • Page 1235ACS Ruledef Configuration Mode Commands www host ▀ Usage Use this command to define rule expressions to match the host...
  • Page 1236 ACS Ruledef Configuration Mode Commands ▀ www payload-length www payload-length This command allows you to define rule expressions to...
  • Page 1237ACS Ruledef Configuration Mode Commands www pdu-length ▀ www pdu-length This command allows you to define rule expressions to match...
  • Page 1238 ACS Ruledef Configuration Mode Commands ▀ www previous-state www previous-state This command allows you to define rule expressions to...
  • Page 1239ACS Ruledef Configuration Mode Commands www reply code ▀ www reply code This command allows you to define rule expressions...
  • Page 1240 ACS Ruledef Configuration Mode Commands ▀ www state www state This command allows you to define rule expressions to...
  • Page 1241ACS Ruledef Configuration Mode Commands www transfer-encoding ▀ www transfer-encoding This command allows you to define rule expressions to match...
  • Page 1242 ACS Ruledef Configuration Mode Commands ▀ www transfer-encoding Usage Use this command to define rule expressions to match the...
  • Page 1243ACS Ruledef Configuration Mode Commands www url ▀ www url This command allows you to define rule expressions to match...
  • Page 1244 ACS Ruledef Configuration Mode Commands ▀ www url Usage Use this command to define rule expressions to match the...
  • Page 1245 ACS Ruledef Configuration Mode Commands www url ▀ Regex Character Description | Specify OR regular expression operator Important: When...
  • Page 1246
  • Page 1247: Chapter 20 ACS Timedef Configuration Mode CommandsChapter 20 ACS Timedef Configuration Mode Commands The ACS Timedef Configuration Mode enables configuring the Time-of-Day Activation/Deactivation feature. Important: This...
  • Page 1248 ACS Timedef Configuration Mode Commands ▀ end end Exits the current configuration mode and returns to the Exec mode....
  • Page 1249ACS Timedef Configuration Mode Commands exit ▀ exit Exits the current mode and returns to the parent configuration mode. Product...
  • Page 1250 ACS Timedef Configuration Mode Commands ▀ start start This command allows you to configure timeslots in the current timedef....
  • Page 1251ACS Timedef Configuration Mode Commands start ▀ In specifying the start/end time:  hh: Specifies the start/end hour, and must...
  • Page 1252
  • Page 1253: Chapter 21 ACS x-Header Format Configuration Mode CommandsChapter 21 ACS x-Header Format Configuration Mode Commands The ACS x-header Format Configuration Mode is used to create and configure...
  • Page 1254 ACS x-Header Format Configuration Mode Commands ▀ end end Exits the current configuration mode and returns to the Exec...
  • Page 1255ACS x-Header Format Configuration Mode Commands exit ▀ exit Exits the current mode and returns to the parent configuration mode....
  • Page 1256 ACS x-Header Format Configuration Mode Commands ▀ insert insert This command allows you to configure the x-header fields to...
  • Page 1257ACS x-Header Format Configuration Mode Commands insert ▀ string-constant xheader_field_value Specifies constant a string value for x-header field to be...
  • Page 1258 ACS x-Header Format Configuration Mode Commands ▀ insert  radius-string: SN-Transparent-Data Attribute received in RADIUS ACCESS ACCEPT message. ...
  • Page 1259: Chapter 22 ALCAP Configuration Mode CommandsChapter 22 ALCAP Configuration Mode Commands The ALCAP Service Configuration Mode is used to create, provide, and manage the Access...
  • Page 1260 ALCAP Configuration Mode Commands ▀ aal2-node aal2-node Thsi command creates/configures AAL2 node configuration to defined AAL2 node properties for...
  • Page 1261ALCAP Configuration Mode Commands aal2-node ▀ aal2-node aal2_node_name -noconfirm Command Line Interface Reference, StarOS Release 17 ▄ 1261
  • Page 1262 ALCAP Configuration Mode Commands ▀ aal2-route aal2-route This command defines a route for each ATM Endpoint Service Address (AESA)...
  • Page 1263ALCAP Configuration Mode Commands aal2-route ▀ The default keyword can be used to configure a default aal2-route which will match...
  • Page 1264 ALCAP Configuration Mode Commands ▀ associate associate This command associates a previously configured SS7 routing domain with this ALCAP...
  • Page 1265ALCAP Configuration Mode Commands end ▀ end Exits the current mode and returns to the Exec Mode. Product All Privilege...
  • Page 1266 ALCAP Configuration Mode Commands ▀ exit exit Exits the current mode and returns to the previous mode. Product All...
  • Page 1267ALCAP Configuration Mode Commands maximum reset-retransmission ▀ maximum reset-retransmission This command sets the maximum number of retries allowed for transmission...
  • Page 1268 ALCAP Configuration Mode Commands ▀ self-point-code self-point-code This command specifies the SS7 point code address for ALCAP service. Product...
  • Page 1269ALCAP Configuration Mode Commands timeout alcap ▀ timeout alcap This command configures the timeout duration for various ALCAP procedure timers...
  • Page 1270 ALCAP Configuration Mode Commands ▀ timeout alcap mod mod_timer_value Specifies the maximum time, in seconds, the system waits for...
  • Page 1271ALCAP Configuration Mode Commands timeout alcap ▀ Usage Use this command to configure the timeout duration for various ALCAP procedures...
  • Page 1272 ALCAP Configuration Mode Commands ▀ timeout stc timeout stc This command configures the timeout duration for STC long (T30)...
  • Page 1273ALCAP Configuration Mode Commands timeout stc ▀ not to reduce traffic too rapidly. Reception of a congestion indication after the...
  • Page 1274
  • Page 1275: Chapter 23 APN Configuration Mode CommandsChapter 23 APN Configuration Mode Commands The Access Point Name (APN) Configuration Mode is used to create and configure APN...
  • Page 1276 APN Configuration Mode Commands ▀ aaa aaa This command configures Authentication, Authorization, and Accounting (AAA) functionality at the Access...
  • Page 1277APN Configuration Mode Commands aaa ▀ Usage Use this command to configure AAA functionality at the APN level. Instead of...
  • Page 1278 APN Configuration Mode Commands ▀ access-link access-link Configures IP fragmentation processing over the Access-link (PPP, GTP etc.). Product GGSN...
  • Page 1279APN Configuration Mode Commands access-link ▀ the above tests) into two payloads (if the DF bit is not set). If...
  • Page 1280 APN Configuration Mode Commands ▀ accounting-mode accounting-mode Configures the protocol to be used for PDP context accounting by this...
  • Page 1281APN Configuration Mode Commands accounting-mode ▀ none Disables accounting for PDP contexts using this APN. When accounting mode is set...
  • Page 1282 APN Configuration Mode Commands ▀ accounting-mode context. As specified by the standards, a CDR is not generated when a...
  • Page 1283APN Configuration Mode Commands active-charging bandwidth-policy ▀ active-charging bandwidth-policy Configures the bandwidth policy to be used for subscribers who use...
  • Page 1284 APN Configuration Mode Commands ▀ active-charging link-monitor tcp active-charging link-monitor tcp Enables the TCP link monitoring feature on the...
  • Page 1285APN Configuration Mode Commands active-charging link-monitor tcp ▀ Usage Use this command to enable TCP link monitoring on the Mobile...
  • Page 1286 APN Configuration Mode Commands ▀ active-charging radio-congestion active-charging radio-congestion Enables the Congestion Management feature on the Mobile Video Gateway....
  • Page 1287APN Configuration Mode Commands active-charging rulebase ▀ active-charging rulebase Specifies the name of the Active Charging Service (ACS) rulebase to...
  • Page 1288 APN Configuration Mode Commands ▀ active-charging rulebase-list active-charging rulebase-list Specifies the name of the ACS rulebase list to be...
  • Page 1289APN Configuration Mode Commands apn-ambr ▀ apn-ambr Configures the Aggregated Maximum Bit Rate (AMBR) for all PDNs using this APN....
  • Page 1290 APN Configuration Mode Commands ▀ apn-ambr Important: In 17.3 and later releases, this option has been deprecated. violate-action {...
  • Page 1291APN Configuration Mode Commands associate accounting-policy ▀ associate accounting-policy Associates the APN with specific pre-configured policies configured in the same...
  • Page 1292 APN Configuration Mode Commands ▀ associate qci-qos-mapping associate qci-qos-mapping Associates a pre-configured QCI-QoS-Mapping table with this APN to support...
  • Page 1293APN Configuration Mode Commands authentication ▀ authentication Configures the APN’s authentication parameters. Product GGSN P-GW PDG/TTG SAEGW Privilege Security Administrator,...
  • Page 1294 APN Configuration Mode Commands ▀ authentication username-strip-apn Default: Disabled. This keyword if enabled, either with msisdn-auth or imsi-auth strips...
  • Page 1295APN Configuration Mode Commands authentication ▀ This option is used in conjunction with allow-noauth. It allows session to get established...
  • Page 1296 APN Configuration Mode Commands ▀ authentication Authentication IP PDP Context Behavior PPP PDP Context Behavior Mechanism allow- Allows the...
  • Page 1297APN Configuration Mode Commands authorize-with-hss ▀ authorize-with-hss This command enables or disables subscriber session authorization per APN via a Home...
  • Page 1298 APN Configuration Mode Commands ▀ authorize-with-hss Important: If the S6b AAA group is configured under both APN and P-GW...
  • Page 1299APN Configuration Mode Commands bearer-control-mode ▀ bearer-control-mode Enables or disables the bearer control mode for network controlled QoS (NCQoS) through...
  • Page 1300 APN Configuration Mode Commands ▀ bearer-control-mode This keyword indicates that the APN configured with “none” option for bearer control...
  • Page 1301APN Configuration Mode Commands cc-home ▀ cc-home Configures the home subscriber charging characteristics (CC) used by the GGSN when those...
  • Page 1302 APN Configuration Mode Commands ▀ cc-home Multiple behavior bits can be configured for a single profile index by ORing...
  • Page 1303APN Configuration Mode Commands cc-profile ▀ cc-profile This command selectively enables or disables the Gy sessions based on the Charging...
  • Page 1304 APN Configuration Mode Commands ▀ cc-profile cc_group_name Specifies name of the credit control group as an alphanumeric string of...
  • Page 1305APN Configuration Mode Commands cc-roaming ▀ cc-roaming Configures the roaming subscriber charging characteristics (CC) used by the GGSN when those...
  • Page 1306 APN Configuration Mode Commands ▀ cc-roaming Multiple behavior bits can be configured for a single profile index by ORing...
  • Page 1307APN Configuration Mode Commands cc-sgsn ▀ cc-sgsn Specifies the source for charging characteristics (CC) - those configured locally or those...
  • Page 1308 APN Configuration Mode Commands ▀ cc-sgsn Before entering no cc-sgsn, it is helpful to determine which CC sources have...
  • Page 1309APN Configuration Mode Commands cc-sgsn ▀ Usage This command specifies whether or not CCs received from the SGSN will be...
  • Page 1310 APN Configuration Mode Commands ▀ cc-visiting cc-visiting Configures the visiting subscriber charging characteristics (CC) used by the GGSN when...
  • Page 1311APN Configuration Mode Commands cc-visiting ▀ Multiple behavior bits can be configured for a single profile index by ORing the...
  • Page 1312 APN Configuration Mode Commands ▀ content-filtering category content-filtering category Enables or disables the specified pre-configured Category Policy Identifier for...
  • Page 1313APN Configuration Mode Commands content-filtering category ▀ The following command enters the Content Filtering Policy Configuration Mode and enables the...
  • Page 1314 APN Configuration Mode Commands ▀ credit-control-client credit-control-client Configures the credit-control client parameters for subscribers who use this APN. Product...
  • Page 1315APN Configuration Mode Commands credit-control-client ▀ Important: This CLI can be changed on the fly. The modified values will be...
  • Page 1316 APN Configuration Mode Commands ▀ credit-control-group credit-control-group Configures the credit control group to be used for subscribers who use...
  • Page 1317APN Configuration Mode Commands credit-control-group ▀ Important: The CLI command “cc-sgsn” within APN configuration mode, should be used cautiously as...
  • Page 1318 APN Configuration Mode Commands ▀ daf-pdp-type daf-pdp-type By configuring this command P-GW/GGSN can set different behavior of assigning PDN...
  • Page 1319APN Configuration Mode Commands daf-pdp-type ▀ Usage By configuring this command P-GW/GGSN can set different behavior of assigning PDN Type...
  • Page 1320 APN Configuration Mode Commands ▀ data-tunnel mtu data-tunnel mtu Configures the Maximum Transmission Unit (MTU) for data sent on...
  • Page 1321APN Configuration Mode Commands data-tunneling ignore df-bit ▀ data-tunneling ignore df-bit Controls the handling of the DF (Don't Fragment) bit...
  • Page 1322 APN Configuration Mode Commands ▀ dcca origin endpoint dcca origin endpoint This command is obsolete. To configure the Diameter...
  • Page 1323APN Configuration Mode Commands dcca peer-select ▀ dcca peer-select Specifies the Diameter credit control primary and secondary host for credit...
  • Page 1324 APN Configuration Mode Commands ▀ dcca peer-select Caution: This configuration completely overrides all instances of diameter peer-select that have...
  • Page 1325APN Configuration Mode Commands description ▀ description Allows you to enter descriptive text for this configuration. Product All Privilege Security...
  • Page 1326 APN Configuration Mode Commands ▀ dhcp context-name dhcp context-name Configures the name of the context on the system in...
  • Page 1327APN Configuration Mode Commands dhcp lease-expiration-policy ▀ dhcp lease-expiration-policy Configures the system’s handling of PDP contexts whose DHCP assigned IP...
  • Page 1328 APN Configuration Mode Commands ▀ dhcp service-name dhcp service-name Configures the name of a specific DHCP service to use...
  • Page 1329APN Configuration Mode Commands dhcpv6 context-name ▀ dhcpv6 context-name Configures the name of the context on the system in which...
  • Page 1330 APN Configuration Mode Commands ▀ dhcpv6 service-name dhcpv6 service-name Specifies which DHCPV6 service to use, if the alloc-type is...
  • Page 1331APN Configuration Mode Commands dns ▀ dns Configures the Domain Name Service (DNS) servers that will be used by the...
  • Page 1332 APN Configuration Mode Commands ▀ dns The DNS can be specified at the APN level in APN configuration as...
  • Page 1333APN Configuration Mode Commands egtp ▀ egtp Enables/disables the Overcharging Protection feature on an APN service. Product P-GW SAEGW Privilege...
  • Page 1334 APN Configuration Mode Commands ▀ egtp egtp overcharge-protection drop-all ▄ Command Line Interface Reference, StarOS Release 17 1334
  • Page 1335APN Configuration Mode Commands egtpc-qci-stats ▀ egtpc-qci-stats Enables/disables an APN candidate list for the apn-expansion bulkstats schema. Product P-GW SAEGW...
  • Page 1336 APN Configuration Mode Commands ▀ egtpc-qci-stats qci5 Configure apn-qci-egtpc statistics for QCI 5. qci6 Configure apn-qci-egtpc statistics for QCI...
  • Page 1337APN Configuration Mode Commands ehrpd-access ▀ ehrpd-access Configures the P-GW to exclude IPv6 traffic from being delivered to UEs, accessing...
  • Page 1338 APN Configuration Mode Commands ▀ emergency-apn emergency-apn Configures this APN as an emergency APN for Voice over LTE (VoLTE)...
  • Page 1339APN Configuration Mode Commands end ▀ end Exits the current configuration mode and returns to the Exec mode. Product All...
  • Page 1340 APN Configuration Mode Commands ▀ exit exit Exits the current mode and returns to the parent configuration mode. Product...
  • Page 1341APN Configuration Mode Commands firewall policy ▀ firewall policy Eenables or disables Stateful Firewall support for the APN. Product All...
  • Page 1342 APN Configuration Mode Commands ▀ firewall policy The following command disables Stateful Firewall support for an APN: no firewall...
  • Page 1343APN Configuration Mode Commands fw-and-nat policy ▀ fw-and-nat policy Specifies the Firewall-and-NAT policy to be used for subscribers who use...
  • Page 1344 APN Configuration Mode Commands ▀ fw-and-nat policy Important: This customer-specific command must be used to configure the Policy-based Firewall-and-NAT...
  • Page 1345APN Configuration Mode Commands gsm-qos negotiate ▀ gsm-qos negotiate Enables negotiation of the QoS Reliability Class attribute based on the...
  • Page 1346 APN Configuration Mode Commands ▀ gsm-qos negotiate Code Value 2 7*10-3 3 10-3 4 10-4 5 10-5 6 10-6...
  • Page 1347APN Configuration Mode Commands gtpp group ▀ gtpp group Enables a configured GTPP server group to an APN for CGF...
  • Page 1348 APN Configuration Mode Commands ▀ gtpp group accounting-context ac_context_name Specifies the name of an accounting context on the system...
  • Page 1349APN Configuration Mode Commands gtpp secondary-group ▀ gtpp secondary-group Enables or associates a preconfigured secondary GTPP server group to an...
  • Page 1350 APN Configuration Mode Commands ▀ gtpp secondary-group When the secondary GTPP group is configured with this command, the GTPP...
  • Page 1351APN Configuration Mode Commands idle-timeout-activity ▀ idle-timeout-activity Configures a session idle-timeout to be reset with uplink packets only, or with...
  • Page 1352 APN Configuration Mode Commands ▀ ignore-alt-config ignore-alt-config Configures preference to APN/AAA-defined behavior/parameters. If the parameters are not defined in...
  • Page 1353APN Configuration Mode Commands ikev2 tsr ▀ ikev2 tsr Configures the Traffic Selector responder (TSr) negotiation behavior during IKEv2 Security...
  • Page 1354 APN Configuration Mode Commands ▀ ims-auth-service ims-auth-service Applies an IMS (IP Multimedia Subsystem) authorization service to a subscriber through...
  • Page 1355APN Configuration Mode Commands ip access-group ▀ ip access-group Configures an IPv4/IPv6 access group for the current APN profile. Product...
  • Page 1356 APN Configuration Mode Commands ▀ ip access-group Run command without fallback-enabled option to disable ACL fallback for a previously...
  • Page 1357APN Configuration Mode Commands ip address alloc-method ▀ ip address alloc-method Configures the method by which this APN will obtain...
  • Page 1358 APN Configuration Mode Commands ▀ ip address alloc-method Important: If this option is used, the name of the IP...
  • Page 1359APN Configuration Mode Commands ip address alloc-method ▀ ip address alloc-method dhcp-proxy The following command configures the APN to reject...
  • Page 1360 APN Configuration Mode Commands ▀ ip address alloc-method Figure 3. IP Address Allocation Process ▄ Command Line Interface Reference,...
  • Page 1361APN Configuration Mode Commands ip address pool ▀ ip address pool Configures the name of an IP address pool configured...
  • Page 1362 APN Configuration Mode Commands ▀ ip address pool The following command configures the system to use a pool named...
  • Page 1363APN Configuration Mode Commands ip address pool-exhaust-action ▀ ip address pool-exhaust-action Configures the behavior to accept/reject a call if the...
  • Page 1364 APN Configuration Mode Commands ▀ ip context-name ip context-name Configures the name of the destination context to use for...
  • Page 1365APN Configuration Mode Commands ip header-compression ▀ ip header-compression Configures IP packet header compression parameters for this APN. Product GGSN...
  • Page 1366 APN Configuration Mode Commands ▀ ip hide-service-address ip hide-service-address Renders the IP address of the GGSN unreachable from mobile...
  • Page 1367APN Configuration Mode Commands ip local-address ▀ ip local-address Configures the local-side IP address of the subscriber's point-to-point connection. Product...
  • Page 1368 APN Configuration Mode Commands ▀ ip multicast discard ip multicast discard Configures the IP multicast discard packet behavior. Product...
  • Page 1369APN Configuration Mode Commands ip qos-dscp ▀ ip qos-dscp Configures the quality of service (QoS) differentiated service code point (DSCP)...
  • Page 1370 APN Configuration Mode Commands ▀ ip qos-dscp Allocation Priority 1 2 3 2 ef ef ef 3 af21 af21...
  • Page 1371APN Configuration Mode Commands ip qos-dscp ▀ + More than one of the above keywords can be entered within a...
  • Page 1372 APN Configuration Mode Commands ▀ ip source-violation ip source-violation Enables or disables packet source validation for the current APN....
  • Page 1373APN Configuration Mode Commands ip source-violation ▀ Source validation requires the source address of received packets to match the IP...
  • Page 1374 APN Configuration Mode Commands ▀ ip user-datagram-tos copy ip user-datagram-tos copy Controls the copying of the IP ToS octet...
  • Page 1375APN Configuration Mode Commands ipv6 access-group ▀ ipv6 access-group Configures the IPv6 access group for the current APN profile which...
  • Page 1376 APN Configuration Mode Commands ▀ ipv6 access-group Usage Use this command to apply a single IPv6 access control list...
  • Page 1377APN Configuration Mode Commands ipv6 address alloc-method ▀ ipv6 address alloc-method Controls the IPv6 address allocation method for a particular...
  • Page 1378 APN Configuration Mode Commands ▀ ipv6 address alloc-method APN. The static address allocation can be enabled by the use...
  • Page 1379APN Configuration Mode Commands ipv6 address prefix-delegation-len ▀ ipv6 address prefix-delegation-len Configures the supported prefix length to 48/52/56 bit length...
  • Page 1380 APN Configuration Mode Commands ▀ ipv6 address pool-exhaust-action ipv6 address pool-exhaust-action Configures the behavior to accept/reject a call if...
  • Page 1381APN Configuration Mode Commands ipv6 dns ▀ ipv6 dns Configures primary and secondary IPv6 Domain Name Service (DNS) servers. Product...
  • Page 1382 APN Configuration Mode Commands ▀ ipv6 dns Important: The same preference would be applicable for the NBNS (NetBIOS Name...
  • Page 1383APN Configuration Mode Commands ipv6 egress-address-filtering ▀ ipv6 egress-address-filtering Enables or disable IIPv6 egress address filtering. This function filters out...
  • Page 1384 APN Configuration Mode Commands ▀ ipv6 initial-router-advt ipv6 initial-router-advt Creates an IPv6 initial router advertisement interval for the current...
  • Page 1385APN Configuration Mode Commands l3-to-l2-tunnel address-policy ▀ l3-to-l2-tunnel address-policy Configures the address allocation/validation policy, when subscriber L3 (IPv4/IPv6) sessions are...
  • Page 1386 APN Configuration Mode Commands ▀ loadbalance-tunnel-peers loadbalance-tunnel-peers Configures how tunnel-peers are selected for this APN. Product GGSN P-GW SAEGW...
  • Page 1387APN Configuration Mode Commands long-duration-action detection ▀ long-duration-action detection Sets the detection of a session that exceeds the long duration...
  • Page 1388 APN Configuration Mode Commands ▀ long-duration-action disconnection long-duration-action disconnection Specifies what action is taken when the long duration timer...
  • Page 1389APN Configuration Mode Commands long-duration-action disconnection ▀ Use the following command to disconnect the session that exceed the long duration...
  • Page 1390 APN Configuration Mode Commands ▀ mbms bmsc-profile mbms bmsc-profile Applies a configured Broadcast-Multicast Service Center (BM-SC) profile to subscribers...
  • Page 1391APN Configuration Mode Commands mbms bmsc-profile ▀ mbms bmsc-profile name bm_sc_1 Command Line Interface Reference, StarOS Release 17 ▄ 1391...
  • Page 1392 APN Configuration Mode Commands ▀ mbms bearer timeout mbms bearer timeout Configures the session timeout values for the Multimedia...
  • Page 1393APN Configuration Mode Commands mbms bearer timeout ▀ Example The following commands enables an absolute time timeout of 60000 seconds...
  • Page 1394 APN Configuration Mode Commands ▀ mbms ue timeout mbms ue timeout Configures the session timeout values for the Multimedia...
  • Page 1395APN Configuration Mode Commands mediation-device ▀ mediation-device Enables the use of a mediation device and specifies the system context to...
  • Page 1396 APN Configuration Mode Commands ▀ mediation-device If “no-early-PDUs” is enabled, the chassis does not send uplink/downlink data from/to a...
  • Page 1397APN Configuration Mode Commands mobile-ip home-agent ▀ mobile-ip home-agent Configures the IP address of the home agent (HA) used by...
  • Page 1398 APN Configuration Mode Commands ▀ mobile-ip min-reg-lifetime-override mobile-ip min-reg-lifetime-override Specifies the minimum registration timer to override the platform-wide default...
  • Page 1399APN Configuration Mode Commands mobile-ip mn-aaa-removal-indication ▀ mobile-ip mn-aaa-removal-indication Configures the system to remove various information elements when relaying Registration...
  • Page 1400 APN Configuration Mode Commands ▀ mobile-ip mn-ha-hash-algorithm mobile-ip mn-ha-hash-algorithm Designates the encryption algorithm to use for Hash-based Message Authentication...
  • Page 1401APN Configuration Mode Commands mobile-ip mn-ha-shared-key ▀ mobile-ip mn-ha-shared-key Configures the subscriber MobileNode-Home Agent (MN-HA) shared key. Product GGSN P-GW...
  • Page 1402 APN Configuration Mode Commands ▀ mobile-ip mn-ha-spi mobile-ip mn-ha-spi Configures the Mobile IP Security Parameter Index (SPI). Product GGSN...
  • Page 1403APN Configuration Mode Commands mobile-ip required ▀ mobile-ip required Enables support for Mobile IP functionality for all PDP contexts facilitated...
  • Page 1404 APN Configuration Mode Commands ▀ mobile-ip reverse-tunnel mobile-ip reverse-tunnel Configures the system to support reverse-tunneling for Mobile IP sessions...
  • Page 1405APN Configuration Mode Commands nai-construction ▀ nai-construction Configures the Network Access Identifier (NAI) construction parameters on a per-APN basis only,...
  • Page 1406 APN Configuration Mode Commands ▀ nai-construction password Configures the authentication user-password for this NAI-constructed user. password is an alphanumeric...
  • Page 1407APN Configuration Mode Commands nbns ▀ nbns Configures and enables use of NetBios Name Service (NBNS) for the APN. Product...
  • Page 1408 APN Configuration Mode Commands ▀ network-behind-mobile network-behind-mobile Allows enabling/disabling the Network Behind Mobile Station (NBMS) for the APN. Product...
  • Page 1409APN Configuration Mode Commands network-behind-mobile ▀ network-behind-mobile max-subnets 16 Command Line Interface Reference, StarOS Release 17 ▄ 1409
  • Page 1410 APN Configuration Mode Commands ▀ nexthop-forwarding-address nexthop-forwarding-address Configures the next hop forwarding address for the APN. Product GGSN P-GW...
  • Page 1411APN Configuration Mode Commands npu qos ▀ npu qos Configures an NPU QoS priority queue for packets facilitated by the...
  • Page 1412 APN Configuration Mode Commands ▀ outbound outbound Configures the APN host username and password. Product GGSN P-GW SAEGW Privilege...
  • Page 1413APN Configuration Mode Commands outbound ▀ determine the password if an outbound username and password are configured for the APN...
  • Page 1414 APN Configuration Mode Commands ▀ p-cscf p-cscf Enables use of locally configured Proxy Call Session Control Function (P-CSCF) addresses...
  • Page 1415APN Configuration Mode Commands p-cscf ▀ priority address_ priority [ ip IPv4_address | ipv6 IPv6_address ] Specifies the priority for...
  • Page 1416 APN Configuration Mode Commands ▀ pco-options pco-options This command controls the sending of customized PCO (Protocol Configuration Options) options...
  • Page 1417APN Configuration Mode Commands pco-options ▀ Usage Use this command to enable or disable sending of customized PCO options in...
  • Page 1418 APN Configuration Mode Commands ▀ pdn-behavior pdn-behavior Configures specific PDN behavior. Product P-GW Privilege Security Administrator, Administrator Mode Exec...
  • Page 1419APN Configuration Mode Commands pdp-type ▀ pdp-type Configures the type of PDP contexts that are supported by this APN. Product...
  • Page 1420 APN Configuration Mode Commands ▀ pdp-type Usage IP PDP context types are those in which the MS is communicating...
  • Page 1421APN Configuration Mode Commands permission ▀ permission Enables or disables the ability to use authorized services for the current APN....
  • Page 1422 APN Configuration Mode Commands ▀ policy policy Configures the Mobile IPv6 policy to set the action to be taken...
  • Page 1423APN Configuration Mode Commands policy ▀ Usage This command sets the Mobile IPv6 policy for the action to be taken...
  • Page 1424 APN Configuration Mode Commands ▀ ppp ppp Configures the Point-to-Point Protocol (PPP) options for the current APN. Product GGSN...
  • Page 1425APN Configuration Mode Commands ppp ▀ keepalive seconds Specifies the frequency of sending the Link Control Protocol (LCP) keep alive...
  • Page 1426 APN Configuration Mode Commands ▀ proxy-mip proxy-mip Configures support for Proxy Mobile IP functionality for the APN. Product GGSN...
  • Page 1427APN Configuration Mode Commands proxy-mip ▀ The following command causes the system to support Proxy Mobile IP for all PDP...
  • Page 1428 APN Configuration Mode Commands ▀ qci qci Specifies the QoS Class Index (QCI) value to be used to mark...
  • Page 1429APN Configuration Mode Commands qci ▀  A GGSN call connected to this APN will not be classified as Active...
  • Page 1430 APN Configuration Mode Commands ▀ qos negotiate-limit qos negotiate-limit Cconfigures the QoS profile to provide the peak and committed...
  • Page 1431APN Configuration Mode Commands qos negotiate-limit ▀ Important: System measurements for this value exclude the GTP and outer packet headers....
  • Page 1432 APN Configuration Mode Commands ▀ qos negotiate-limit qos negotiate-limit direction uplink peak-data-rate 128000 ▄ Command Line Interface Reference, StarOS...
  • Page 1433APN Configuration Mode Commands qos rate-limit ▀ qos rate-limit Configures the action on a subscriber traffic flow that violates or...
  • Page 1434 APN Configuration Mode Commands ▀ qos rate-limit bytes must be an integer from 1 through 6000000. Important: It is...
  • Page 1435APN Configuration Mode Commands qos rate-limit ▀ Important: If the exceed/violate action is set to “lower-ip-precedence”, this command may override...
  • Page 1436 APN Configuration Mode Commands ▀ qos-renegotiate qos-renegotiate This keyword is obsolete. ▄ Command Line Interface Reference, StarOS Release 17...
  • Page 1437APN Configuration Mode Commands qos traffic-police ▀ qos traffic-police This command is obsolete. This functionality is now supported through qos...
  • Page 1438 APN Configuration Mode Commands ▀ radius radius This command is obsolete. ▄ Command Line Interface Reference, StarOS Release 17...
  • Page 1439APN Configuration Mode Commands radius group ▀ radius group This command is obsolete. Command Line Interface Reference, StarOS Release 17...
  • Page 1440 APN Configuration Mode Commands ▀ radius returned-framed-ip-address radius returned-framed-ip-address Sets the policy whether or not to reject a call...
  • Page 1441APN Configuration Mode Commands radius returned-username ▀ radius returned-username Configures the username that is returned in accounting messages. If the...
  • Page 1442 APN Configuration Mode Commands ▀ radius returned-username default radius returned-username ▄ Command Line Interface Reference, StarOS Release 17 1442...
  • Page 1443APN Configuration Mode Commands restriction-value ▀ restriction-value Configures the level of restriction to ensure controlled co-existence of the Primary PDP...
  • Page 1444 APN Configuration Mode Commands ▀ restriction-value  If value = 2, then PDP contexts with restriction values of 0,...
  • Page 1445APN Configuration Mode Commands secondary ip pool ▀ secondary ip pool This command specifies a secondary IP pool to be...
  • Page 1446 APN Configuration Mode Commands ▀ selection-mode selection-mode Configures the level of verification that will be used to ensure a...
  • Page 1447APN Configuration Mode Commands selection-mode ▀ Example The following command specifies that the MS’s subscription will not be verified and...
  • Page 1448 APN Configuration Mode Commands ▀ timeout timeout Configures the session timeout values for this APN. Product GGSN P-GW SAEGW...
  • Page 1449APN Configuration Mode Commands timeout ▀ del-cause { none | reactiv-req } When subscribers are deleted due to APN timeouts,...
  • Page 1450 APN Configuration Mode Commands ▀ timeout bearer-inactivity timeout bearer-inactivity This command configures the bearer inactivity timer and the threshold...
  • Page 1451APN Configuration Mode Commands timeout bearer-inactivity ▀ gbr Specifies that the GGSN/GW will check for low activity on a GBR...
  • Page 1452 APN Configuration Mode Commands ▀ timeout bearer-inactivity Important: This option is only valid when Cause IE Enhancement for Delete...
  • Page 1453APN Configuration Mode Commands timeout emergency-inactivity ▀ timeout emergency-inactivity Configures the emergency session inactivity-timeout for this APN. The APN must...
  • Page 1454 APN Configuration Mode Commands ▀ timeout idle timeout idle Configures the idle timeout duration for the long duration timer...
  • Page 1455APN Configuration Mode Commands timeout idle ▀ Usage Use this command to set the idle time duration for subscriber session...
  • Page 1456 APN Configuration Mode Commands ▀ timeout idle micro-checkpoint-periodicity timeout idle micro-checkpoint-periodicity Enables configuration of periodic idle seconds micro checkpoint...
  • Page 1457APN Configuration Mode Commands timeout idle micro-checkpoint-periodicity ▀ Usage Use this command to set the idle time duration and micro-checkpoint-periodicity...
  • Page 1458 APN Configuration Mode Commands ▀ timeout long-duration timeout long-duration Configures the long duration timeout and inactivity duration for subscriber...
  • Page 1459APN Configuration Mode Commands timeout long-duration ▀ timeout long-duration 300 inactivity-time 45 Command Line Interface Reference, StarOS Release 17 ▄...
  • Page 1460 APN Configuration Mode Commands ▀ tunnel address-policy tunnel address-policy This command specifies the address allocation/validation policy for all tunneled...
  • Page 1461APN Configuration Mode Commands tunnel address-policy ▀ Use the following command to reset the IP address validation policy to validate...
  • Page 1462 APN Configuration Mode Commands ▀ tunnel gre tunnel gre Configures Generic Routing Encapsulation (GRE) tunnel parameters between the GGSN...
  • Page 1463APN Configuration Mode Commands tunnel gre ▀ Example The following command configures the system to encapsulate subscriber traffic using GRE...
  • Page 1464 APN Configuration Mode Commands ▀ tunnel ipip tunnel ipip Configures IP-in-IP tunnelling parameters between the GGSN and an external...
  • Page 1465APN Configuration Mode Commands tunnel ipip ▀ tunnel ipip peer-address 192.168.1.225 local-address 192.168.1.100 preference 1 Command Line Interface Reference, StarOS...
  • Page 1466 APN Configuration Mode Commands ▀ tunnel ipsec tunnel ipsec This command configures sessions for the current APN to use...
  • Page 1467APN Configuration Mode Commands tunnel l2tp ▀ tunnel l2tp Configures Layer 2 Tunnelling Protocol (L2TP) parameters between the GGSN and...
  • Page 1468 APN Configuration Mode Commands ▀ tunnel l2tp preference num Default: 1 Specifies the preference of the tunnel if the...
  • Page 1469APN Configuration Mode Commands tunnel l2tp ▀ Usage This command can be used to configure the GGSN to tunnel subscriber...
  • Page 1470 APN Configuration Mode Commands ▀ virtual-apn gdcr virtual-apn gdcr Defines which APN (Gn or virtual) is used in charging...
  • Page 1471APN Configuration Mode Commands virtual-apn preference ▀ virtual-apn preference Defines one or more criteria used to redirect a call received...
  • Page 1472 APN Configuration Mode Commands ▀ virtual-apn preference access-gw-address { ip_address | ip_address/mask } Specifies the Access Gateway (SGSN/SGW/Other) IP...
  • Page 1473APN Configuration Mode Commands virtual-apn preference ▀ msisdn-range from msisdn_start_range to msisdn_to_range Specifies the MSISDN range. msisdn_start_range is the starting...
  • Page 1474 APN Configuration Mode Commands ▀ virtual-apn preference The functionality provided by this command can also be used to restrict...
  • Page 1475APN Configuration Mode Commands virtual-apn preference ▀ virtual-apn preference 3 apn bigco.com access-gateway-address 192.168.62.2 virtual-apn preference 4 apn bigco.co.kr access-gateway-address...
  • Page 1476
  • Page 1477: Chapter 24 APN Profile Configuration ModeChapter 24 APN Profile Configuration Mode The APN Profile configuration mode defines a set of parameters controlling the SGSN or...
  • Page 1478 APN Profile Configuration Mode ▀ accounting context accounting context This command allows you to define the name of the...
  • Page 1479APN Profile Configuration Mode accounting mode ▀ accounting mode This command allows you to define the mode of accounting to...
  • Page 1480 APN Profile Configuration Mode ▀ address-resolution-mode address-resolution-mode Identifies the address resolution mode for this APN profile. Important: From release...
  • Page 1481APN Profile Configuration Mode apn-resolve-dns-query ▀ apn-resolve-dns-query Command enables the SGSN to send Straightforward Name Authority Pointer (SNAPTR) type DNS...
  • Page 1482 APN Profile Configuration Mode ▀ apn-restoration apn-restoration Configures the APN restoration priority value. Product MME SGSN Privilege Security Administrator,...
  • Page 1483APN Profile Configuration Mode apn-type ▀ apn-type Identifies the type of APN as an IMS APN. Product SGSN Privilege Security...
  • Page 1484 APN Profile Configuration Mode ▀ associate accounting-policy associate accounting-policy Associates the APN with specific pre-configured policies configured in the...
  • Page 1485APN Profile Configuration Mode associate qci-qos-mapping ▀ associate qci-qos-mapping Provides operators with a configuration to associate a Qos Class Identifier...
  • Page 1486 APN Profile Configuration Mode ▀ associate quality-of-service-profile associate quality-of-service-profile Associates the specified Quality of Service profile with the APN...
  • Page 1487APN Profile Configuration Mode associate sgw-paging-profile ▀ associate sgw-paging-profile This command allows the association of an SGW Paging Profile with...
  • Page 1488 APN Profile Configuration Mode ▀ active-charging rulebase active-charging rulebase Configure the name of the rulebase that contains the charging...
  • Page 1489APN Profile Configuration Mode cc ▀ cc Configures the charging characteristics (CC) for this APN profile. Product SGSN S-GW SAEGW...
  • Page 1490 APN Profile Configuration Mode ▀ cc  hlr-value-for-scdrs: instructs the system to use charging characteristic settings received from the...
  • Page 1491APN Profile Configuration Mode dedicated-bearers ▀ dedicated-bearers Configures the MME to either accept or reject dedicated GBR and Non-GBR bearers....
  • Page 1492 APN Profile Configuration Mode ▀ description description Defines a descriptive string relevant to the specific APN profile. Product MME...
  • Page 1493APN Profile Configuration Mode direct-tunnel ▀ direct-tunnel Defines the permission for direct tunnel establishment by GGSNs. This command is specific...
  • Page 1494 APN Profile Configuration Mode ▀ dns dns Configure the primary and secondary IP address of the DNS servers. Product...
  • Page 1495APN Profile Configuration Mode dns-extn ▀ dns-extn Takes an offset group of digits from the MSISDN and appends the digits...
  • Page 1496 APN Profile Configuration Mode ▀ dns-extn Usage With this command, the APN in the DNS query string, used for...
  • Page 1497APN Profile Configuration Mode end ▀ end Exits the current configuration mode and returns to the Exec mode. Product All...
  • Page 1498 APN Profile Configuration Mode ▀ exit exit Exits the current mode and returns to the parent configuration mode. Product...
  • Page 1499APN Profile Configuration Mode gn-gtp-version ▀ gn-gtp-version This command enables the operator to prevent the SGSN from attempting GTPv0 Requests...
  • Page 1500 APN Profile Configuration Mode ▀ gn-gtp-version The following command deletes the previous configuration and re-enables the default so the...
  • Page 1501APN Profile Configuration Mode gateway-address ▀ gateway-address Configures the IPv4 or IPv6 address of the GGSN supporting the APN associated...
  • Page 1502 APN Profile Configuration Mode ▀ gateway-address secondary-pool This optional keyword allows the operator to enable multiple GGSN pools by...
  • Page 1503APN Profile Configuration Mode gtp ▀ gtp Enables or disables the GTPC private extension for the Overcharging Protection feature. This...
  • Page 1504 APN Profile Configuration Mode ▀ gtp gtp private-extension loss-of-radio-coverage send-to-ggsn ▄ Command Line Interface Reference, StarOS Release 17 1504...
  • Page 1505APN Profile Configuration Mode idle-mode-acl ▀ idle-mode-acl Configures a group of access control lists (ACLs) that define rules to apply...
  • Page 1506 APN Profile Configuration Mode ▀ ip ip Defines the IP parameters for this APN profile. Product SGSN S-GW SAEGW...
  • Page 1507APN Profile Configuration Mode ip ▀  conversational - Configures the DSCP marking to be used for packets of sessions...
  • Page 1508 APN Profile Configuration Mode ▀ ip  linked-pdp - deactivate all associated pdp contexts (primary and secondary). Default is...
  • Page 1509APN Profile Configuration Mode ip access-group ▀ ip access-group Configure the name of the access control list (ACL) for incoming...
  • Page 1510 APN Profile Configuration Mode ▀ ip address pool ip address pool Configure the name of the IP address pool...
  • Page 1511APN Profile Configuration Mode ip context-name ▀ ip context-name Configure the name of the context where the IP pool configuration...
  • Page 1512 APN Profile Configuration Mode ▀ isr-sequential-paging isr-sequential-paging Enables or disables the Intelligent Paging for ISR feature. Product S-GW SAEGW...
  • Page 1513APN Profile Configuration Mode local-offload ▀ local-offload Enables or disables the SaMOG Local Breakout (LBO) Enhanced feature. Product SaMOG Privilege...
  • Page 1514 APN Profile Configuration Mode ▀ location-reporting location-reporting Configure location change reporting via ULI IE per APN for an S4-SGSN....
  • Page 1515APN Profile Configuration Mode mobility-protocol ▀ mobility-protocol This command allows you to configure the default mobility protocol type to be...
  • Page 1516 APN Profile Configuration Mode ▀ ntsr ntsr This command configures QCI and ARP in the apn-profile for Network Triggered...
  • Page 1517APN Profile Configuration Mode ntsr ▀ ntsr all Command Line Interface Reference, StarOS Release 17 ▄ 1517
  • Page 1518 APN Profile Configuration Mode ▀ overcharge-protection overcharge-protection Enables overcharge protection for APNs controlled by this APN profile. Each overcharging...
  • Page 1519APN Profile Configuration Mode overcharge-protection ▀ Usage Use this command to specify P-GW to pause charging on abnormal-s1-release, DDN failure...
  • Page 1520 APN Profile Configuration Mode ▀ pdp-data-inactivity pdp-data-inactivity Configures the APN profile regarding PDP data inactivity. This command is specific...
  • Page 1521APN Profile Configuration Mode pdp-data-inactivity ▀ Usage Use this command to define how the SGSN will handle a situation where...
  • Page 1522 APN Profile Configuration Mode ▀ pdp-type-ipv4v6-override pdp-type-ipv4v6-override Configure the PDP type to use, per APN, if dual PDP type...
  • Page 1523APN Profile Configuration Mode pgw-address ▀ pgw-address Configures the IPv4 or IPv6 address of the P-GW supporting the APN associated...
  • Page 1524 APN Profile Configuration Mode ▀ pgw-address On the S4-SGSN, use this command to configure a local P-GW address for...
  • Page 1525APN Profile Configuration Mode qos allow-upgrade ▀ qos allow-upgrade Configure this command to allow upgrade of QoS from GGSN. The...
  • Page 1526 APN Profile Configuration Mode ▀ qos allow-upgrade Use the following command to configure QoS upgrade support in a UMTS...
  • Page 1527APN Profile Configuration Mode qos apn-ambr ▀ qos apn-ambr Configures the APN-AMBR (aggregate maximum bit rate) that will be stored...
  • Page 1528 APN Profile Configuration Mode ▀ qos class qos class Configures local values for the traffic class (TC) parameters for...
  • Page 1529APN Profile Configuration Mode qos class ▀ All qualifying options are explained below. conversational Selects the ‘real-time’ conversational traffic class...
  • Page 1530 APN Profile Configuration Mode ▀ qos class streaming Selects the streaming traffic class of service, which handles one-way, real-time...
  • Page 1531APN Profile Configuration Mode qos class ▀ QoS Parameter Predefined Value SDU delivery order No Delivery of Erroneous SDUs No...
  • Page 1532 APN Profile Configuration Mode ▀ qos class QoS Parameter Predefined Value SDU Error Ratio 7 (1 * 10 ^...
  • Page 1533APN Profile Configuration Mode qos class ▀  4: represents 4*10^-3  7: represents 10^-5  9: represents 6*10^-8 ...
  • Page 1534 APN Profile Configuration Mode ▀ qos class Repeat the command as often as needed with different options to define...
  • Page 1535APN Profile Configuration Mode qos dedicated-bearer ▀ qos dedicated-bearer Configures the quality of service maximum bit rate (MBR) parameters for...
  • Page 1536 APN Profile Configuration Mode ▀ qos default-bearer qos default-bearer Configures the quality of service parameters for the default bearer....
  • Page 1537APN Profile Configuration Mode qos default-bearer ▀ qos default-bearer arp 2 preemption-capability may Command Line Interface Reference, StarOS Release 17...
  • Page 1538 APN Profile Configuration Mode ▀ qos pgw-upgrade qos pgw-upgrade Configures the action to be taken when the MME receives...
  • Page 1539APN Profile Configuration Mode qos pgw-upgrade ▀ In the case of an Attach Reject or PDN Connectivity Reject, the ESM...
  • Page 1540 APN Profile Configuration Mode ▀ qos prefer-as-cap qos prefer-as-cap Specifies operational preferences for QoS parameters, specifically QoS bit rates....
  • Page 1541APN Profile Configuration Mode qos prefer-as-cap ▀ hlr-subscription Instructs the SGSN to take the QoS bit rates from the HLR...
  • Page 1542 APN Profile Configuration Mode ▀ qos rate-limit direction qos rate-limit direction Configures the actions governing the subscriber traffic flow,...
  • Page 1543APN Profile Configuration Mode qos rate-limit direction ▀  duration seconds: Must be an integer from 1 to 30; default...
  • Page 1544 APN Profile Configuration Mode ▀ qos rate-limit direction committed-auto-readjust duration seconds: Must be an integer from 1 to 30....
  • Page 1545APN Profile Configuration Mode qos rate-limit direction ▀ Downlink Traffic: Disabled Uplink Traffic: Disabled Peak Data Rate (in bps): 16000000...
  • Page 1546 APN Profile Configuration Mode ▀ ranap allocation-retention-priority-ie ranap allocation-retention-priority-ie Configures the allocation/retention priority (ARP) IE for this APN profile....
  • Page 1547APN Profile Configuration Mode ranap allocation-retention-priority-ie ▀  streaming: streaming class of service Default values will be included in the...
  • Page 1548 APN Profile Configuration Mode ▀ ranap allocation-retention-priority-ie Subscribed Traffic Class RANAP Priority RANAP Preemption RANAP Preemption RANAP Queuing ARP...
  • Page 1549APN Profile Configuration Mode restrict access-type ▀ restrict access-type Configures the activation restrictions of PDP context on the basis of...
  • Page 1550 APN Profile Configuration Mode ▀ restrict access-type Usage Use this command to configure the restriction rules in an APN...
  • Page 1551APN Profile Configuration Mode sm t3396 ▀ sm t3396 The sm command includes a new keyword to set the SM...
  • Page 1552 APN Profile Configuration Mode ▀ sm t3396 Example Use a command similar to the following to define a T3396...
  • Page 1553APN Profile Configuration Mode timeout bearer-inactivity ▀ timeout bearer-inactivity Supports a bearer inactivity timeout for GBR and non-GBR S-GW bearer...
  • Page 1554 APN Profile Configuration Mode ▀ timeout bearer-inactivity uplinkbytes Specifies that an uplink data volume threshold will be used. bytes...
  • Page 1555APN Profile Configuration Mode twan ▀ twan Configures the APN profile with the default gateway address and mask to be...
  • Page 1556 APN Profile Configuration Mode ▀ virtual-mac virtual-mac Configures the virtual MAC address for this APN profile to use as...
  • Page 1557: Chapter 25 APN Remap Table Configuration ModeChapter 25 APN Remap Table Configuration Mode APN Remap Table Configuration mode provides the commands to configure parameters for multiple...
  • Page 1558 APN Remap Table Configuration Mode ▀ apn-remap apn-remap Creates an entry in the APN remap table and provides the...
  • Page 1559APN Remap Table Configuration Mode apn-remap ▀ apn_op_id is a string of 1 to 18 characters including digits, letters, and...
  • Page 1560 APN Remap Table Configuration Mode ▀ apn-remap apn-remap network-identifier * value-for-ni-wc newnet.com A one-to-one APN OI remap entry is...
  • Page 1561APN Remap Table Configuration Mode apn-selection-default ▀ apn-selection-default Enables and configures or disables the Default APN feature for use when...
  • Page 1562 APN Remap Table Configuration Mode ▀ apn-selection-default network-identifier apn_net_id Specifies the network identifier will be used as the default...
  • Page 1563APN Remap Table Configuration Mode apn-selection-default ▀ Important: For SGSN ONLY - Beginning with Release 16, customers already using an...
  • Page 1564 APN Remap Table Configuration Mode ▀ apn-selection-default The following command enables the default APN feature for APN HomeNet1 in...
  • Page 1565APN Remap Table Configuration Mode blank-apn ▀ blank-apn Enables the Blank APN feature and defines the APN that will be...
  • Page 1566 APN Remap Table Configuration Mode ▀ cc cc This command maps an APN override based on charging characteristics. Product...
  • Page 1567APN Remap Table Configuration Mode cc ▀ Usage Use this command to enable APN remapping only when the charging characteristic...
  • Page 1568 APN Remap Table Configuration Mode ▀ description description Defines a string that describes this APN remap table. Product MME...
  • Page 1569APN Remap Table Configuration Mode end ▀ end Exits the current configuration mode and returns to the Exec mode. Product...
  • Page 1570 APN Remap Table Configuration Mode ▀ exit exit Exits the current mode and returns to the parent configuration mode....
  • Page 1571APN Remap Table Configuration Mode wildcard-apn ▀ wildcard-apn Enables or disables the Wildcard APN feature and define the default APN...
  • Page 1572 APN Remap Table Configuration Mode ▀ wildcard-apn  the UE requested a PDP type of IPv4v6  the UE...
  • Page 1573: Chapter 26 ARP-RP Mapping Profile Configuration ModeChapter 26 ARP-RP Mapping Profile Configuration Mode The commands in this mode configure the various parameters of the ARP-RP Mapping...
  • Page 1574 ARP-RP Mapping Profile Configuration Mode ▀ arp arp This command modifies the ARP (allocation retention priority) to RP (radio...
  • Page 1575ARP-RP Mapping Profile Configuration Mode end ▀ end Exits the current configuration mode and returns to the Exec mode. Product...
  • Page 1576 ARP-RP Mapping Profile Configuration Mode ▀ exit exit Exits the current mode and returns to the parent configuration mode....
  • Page 1577: Chapter 27 ATM Port Configuration Mode CommandsChapter 27 ATM Port Configuration Mode Commands The Asynchronous Transfer Mode (ATM) port configuration mode provides the commands to create,...
  • Page 1578 ATM Port Configuration Mode Commands ▀ clock-source clock-source This command sets the source of the port’s transmit clock. Product...
  • Page 1579ATM Port Configuration Mode Commands description ▀ description Defines descriptive text that provides useful information about the port. Product SGSN...
  • Page 1580 ATM Port Configuration Mode Commands ▀ end end Exits the current configuration mode and returns to the Exec mode....
  • Page 1581ATM Port Configuration Mode Commands exit ▀ exit Exits the current mode and returns to the parent configuration mode. Product...
  • Page 1582 ATM Port Configuration Mode Commands ▀ line-timing line-timing This command enables the SPIO to recover transmit timing source via...
  • Page 1583ATM Port Configuration Mode Commands loopback ▀ loopback Enables/disables loopback and configures the type of loopback mode used for diagnostic...
  • Page 1584 ATM Port Configuration Mode Commands ▀ preferred slot preferred slot This command identifies which card in a chassis assumes...
  • Page 1585ATM Port Configuration Mode Commands pvc ▀ pvc This command creates a Permanent Virtual Connection (PVC), including the definition of...
  • Page 1586 ATM Port Configuration Mode Commands ▀ pvc cps-payload-size cps_payload_value This keyword configures the Common Part Sublayer (CPS) payload in...
  • Page 1587ATM Port Configuration Mode Commands shutdown ▀ shutdown Terminates all processes supporting the port or blocks the shutting down of...
  • Page 1588 ATM Port Configuration Mode Commands ▀ snmp trap link-status snmp trap link-status Enables/disables the generation and sending of an...
  • Page 1589ATM Port Configuration Mode Commands threshold high-activity ▀ threshold high-activity Configures the port’s high and low activity thresholds. Product SGSN...
  • Page 1590 ATM Port Configuration Mode Commands ▀ threshold high-activity If a trigger condition occurs within the polling interval, the alert...
  • Page 1591ATM Port Configuration Mode Commands threshold monitoring ▀ threshold monitoring Enables thresholding for port-level values. Product HNB-GW SGSN Privilege Security...
  • Page 1592 ATM Port Configuration Mode Commands ▀ threshold monitoring Table 19. Thresholding Reporting Mechanisms by Model Model SNMP Traps Logs...
  • Page 1593ATM Port Configuration Mode Commands threshold rx-utilization ▀ threshold rx-utilization Configures thresholds for receive-port utilization. Product HNB-GW SGSN Privilege Security...
  • Page 1594 ATM Port Configuration Mode Commands ▀ threshold rx-utilization Usage Receive port utilization thresholds generate alerts or alarms based on...
  • Page 1595ATM Port Configuration Mode Commands threshold tx-utilization ▀ threshold tx-utilization Configures thresholds for transmit port utilization. Product HNB-GW SGSN Privilege...
  • Page 1596 ATM Port Configuration Mode Commands ▀ threshold tx-utilization Important: Ports configured for half-duplex do not differentiate between data received...
  • Page 1597ATM Port Configuration Mode Commands toh-sdsf ▀ toh-sdsf Enable/disable line SDSF BER thresholds and configure the line transport overhead (TOH)...
  • Page 1598 ATM Port Configuration Mode Commands ▀ toh-sdsf The SD is kept at a value of 100 erroredBits/sec less than...
  • Page 1599: Chapter 28 BFD Configuration Mode CommandsChapter 28 BFD Configuration Mode Commands The BFD Configuration Mode manages the protocol settings for Bidirectional Forwarding Detection (BFD). BFD...
  • Page 1600 BFD Configuration Mode Commands ▀ bfd multihop-peer bfd multihop-peer Configures parameters for any multihop-BFD sessions with the same destination...
  • Page 1601BFD Configuration Mode Commands bfd multihop-peer ▀ peers, the BFD sessions to the destination address will not come UP. If...
  • Page 1602 BFD Configuration Mode Commands ▀ bfd nbr-group-name bfd nbr-group-name Configures BFD neighbor groups. Product All Privilege Security Administrator, Administrator...
  • Page 1603BFD Configuration Mode Commands bfd nbr-group-name ▀ bfd nbr-group-name bgpgroup132 active-if-name bgpif02 Command Line Interface Reference, StarOS Release 17 ▄...
  • Page 1604 BFD Configuration Mode Commands ▀ echo echo Enables or disables BFD echo mode functionality. The Echo function tests the...
  • Page 1605BFD Configuration Mode Commands end ▀ end Exits the current configuration mode and returns to the Exec mode. Product All...
  • Page 1606 BFD Configuration Mode Commands ▀ exit exit Exits the current mode and returns to the parent configuration mode. Product...
  • Page 1607BFD Configuration Mode Commands slow-timers ▀ slow-timers Specifies the asynchronous mode control packet interval when Echo mode is enabled. In...
  • Page 1608
  • Page 1609: Chapter 29 BGP Address-Family (IPv4/IPv6) Configuration Mode CommandsChapter 29 BGP Address-Family (IPv4/IPv6) Configuration Mode Commands The Border Gateway Protocol (BGP) Address-Family (IPv4/IPv6) Configuration Mode is used to...
  • Page 1610 BGP Address-Family (IPv4/IPv6) Configuration Mode Commands ▀ end end Exits the current configuration mode and returns to the Exec...
  • Page 1611BGP Address-Family (IPv4/IPv6) Configuration Mode Commands exit ▀ exit Exits the current mode and returns to the parent configuration mode....
  • Page 1612 BGP Address-Family (IPv4/IPv6) Configuration Mode Commands ▀ maximum-paths maximum-paths Controls the maximum number of parallel external BGP (eBGP) or...
  • Page 1613BGP Address-Family (IPv4/IPv6) Configuration Mode Commands maximum-paths ▀ no maximum-paths ebgp Command Line Interface Reference, StarOS Release 17 ▄ 1613...
  • Page 1614 BGP Address-Family (IPv4/IPv6) Configuration Mode Commands ▀ neighbor neighbor Configures the IPv4/IPv6 Address Family for BGP routers that interconnect...
  • Page 1615BGP Address-Family (IPv4/IPv6) Configuration Mode Commands neighbor ▀ default-originate [ route-map map_name ] Specifies the default originate routes to this...
  • Page 1616 BGP Address-Family (IPv4/IPv6) Configuration Mode Commands ▀ neighbor remove-private-AS Removes the private AS number from outbound updates. Default: Do...
  • Page 1617BGP Address-Family (IPv4/IPv6) Configuration Mode Commands neighbor ▀ weight value Sets the default weight for routes from this neighbor as...
  • Page 1618 BGP Address-Family (IPv4/IPv6) Configuration Mode Commands ▀ network network Configures and specifies a network to announce via BGP. Product...
  • Page 1619BGP Address-Family (IPv4/IPv6) Configuration Mode Commands redistribute ▀ redistribute Redistributes routes into BGP from another protocol as BGP neighbors. Product...
  • Page 1620 BGP Address-Family (IPv4/IPv6) Configuration Mode Commands ▀ redistribute redistribute ospf route-map Map1 The following command removes the redistribution of...
  • Page 1621BGP Address-Family (IPv4/IPv6) Configuration Mode Commands timers bgp ▀ timers bgp Enables or disables an aggressive minimum BGP route advertisement...
  • Page 1622
  • Page 1623: Chapter 30 BGP Address-Family (VPNv4/VPNv6) Configuration Mode CommandsChapter 30 BGP Address-Family (VPNv4/VPNv6) Configuration Mode Commands The Border Gateway Protocol (BGP) Address-Family (VPNv4/VPNv6) Configuration Mode is used to...
  • Page 1624 BGP Address-Family (VPNv4/VPNv6) Configuration Mode Commands ▀ end end Exits the current configuration mode and returns to the Exec...
  • Page 1625BGP Address-Family (VPNv4/VPNv6) Configuration Mode Commands exit ▀ exit Exits the current mode and returns to the parent configuration mode....
  • Page 1626 BGP Address-Family (VPNv4/VPNv6) Configuration Mode Commands ▀ neighbor neighbor Configures the VPNv4 or VPNv6 address family on BGP routers...
  • Page 1627BGP Address-Family (VPNv4/VPNv6) Configuration Mode Commands neighbor ▀ Example The following command enables the exchange of routing information with the...
  • Page 1628 BGP Address-Family (VPNv4/VPNv6) Configuration Mode Commands ▀ timers bgp timers bgp Enables or disables an aggressive minimum BGP route...
  • Page 1629: Chapter 31 BGP Address-Family (VRF) Configuration Mode CommandsChapter 31 BGP Address-Family (VRF) Configuration Mode Commands The Border Gateway Protocol (BGP) Address-Family (VRF) Configuration Mode is used to...
  • Page 1630 BGP Address-Family (VRF) Configuration Mode Commands ▀ end end Exits the current configuration mode and returns to the Exec...
  • Page 1631BGP Address-Family (VRF) Configuration Mode Commands exit ▀ exit Exits the current mode and returns to the parent configuration mode....
  • Page 1632 BGP Address-Family (VRF) Configuration Mode Commands ▀ neighbor neighbor Configures the Virtual Routing and Forwarding (VRF) address family for...
  • Page 1633BGP Address-Family (VRF) Configuration Mode Commands neighbor ▀ distribute-list dist_list {in | out} Filter updates to and from this neighbor...
  • Page 1634 BGP Address-Family (VRF) Configuration Mode Commands ▀ neighbor shutdown Administratively shut down this neighbor. This disables exchanging routes or...
  • Page 1635BGP Address-Family (VRF) Configuration Mode Commands neighbor ▀ neighbor 192.168.100.25 advertisement-interval 180 The following command sets the default weight for...
  • Page 1636 BGP Address-Family (VRF) Configuration Mode Commands ▀ redistribute redistribute Redistributes routes into BGP. This means that any routes from...
  • Page 1637BGP Address-Family (VRF) Configuration Mode Commands redistribute ▀ The following command redistributes OSPF routes after filtering them through the route...
  • Page 1638
  • Page 1639: Chapter 32 BGP Configuration Mode CommandsChapter 32 BGP Configuration Mode Commands The Border Gateway Protocol (BGP) Configuration Mode is used to configure properties for BGP-4...
  • Page 1640 BGP Configuration Mode Commands ▀ accept-zero-as-rd accept-zero-as-rd Configures to accept VPN prefixes with Router Distinguisher(RD) value having Administrator Subfield,...
  • Page 1641BGP Configuration Mode Commands address-family ipv4 ▀ address-family ipv4 Enters the IPv4 Address Family configuration mode. Optionally, it also enables...
  • Page 1642 BGP Configuration Mode Commands ▀ address-family ipv4 Example Use the following command to enter the IPv4 BGP Address-Family configuration...
  • Page 1643BGP Configuration Mode Commands address-family ipv6 ▀ address-family ipv6 Enters the IPv6 Address Family configuration mode. Optionally, it also enables...
  • Page 1644 BGP Configuration Mode Commands ▀ address-family vpnv4 address-family vpnv4 Enters the IPv4 VPN Address Family configuraiton mode. Product All...
  • Page 1645BGP Configuration Mode Commands address-family vpnv6 ▀ address-family vpnv6 Enters the IPv6 VPN Address Family configuraiton mode. Product All Privilege...
  • Page 1646 BGP Configuration Mode Commands ▀ bgp bgp Defines the BGP-specific parameters regarding graceful restarts. Product All Privilege Security Administrator,...
  • Page 1647BGP Configuration Mode Commands description ▀ description Allows you to enter descriptive text for this configuration. Product All Privilege Security...
  • Page 1648 BGP Configuration Mode Commands ▀ distance distance Defines the administrative distance for routes. The administrative distance is the default...
  • Page 1649BGP Configuration Mode Commands distance ▀ Usage Use this command to set the administrative distance for specific routes to values...
  • Page 1650 BGP Configuration Mode Commands ▀ end end Exits the current configuration mode and returns to the Exec mode. Product...
  • Page 1651BGP Configuration Mode Commands enforce-first-as ▀ enforce-first-as Enforces the first Autonomous System (AS) for Exterior Border Gateway Protocol (eBGP) routes....
  • Page 1652 BGP Configuration Mode Commands ▀ exit exit Exits the current mode and returns to the parent configuration mode. Product...
  • Page 1653BGP Configuration Mode Commands ip vrf ▀ ip vrf Adds a preconfigured IP VRF context instance to the BGP ASN...
  • Page 1654 BGP Configuration Mode Commands ▀ maximum-paths maximum-paths Enables forwarding packets over multiple paths and specifies the maximum number of...
  • Page 1655BGP Configuration Mode Commands neighbor ▀ neighbor Configures BGP routers that interconnect to non-broadcast networks. Note that a remote AS...
  • Page 1656 BGP Configuration Mode Commands ▀ neighbor route-map map_name: Specifies the route-map that contains the criteria to originate default routes....
  • Page 1657BGP Configuration Mode Commands neighbor ▀ next-hop-self Disables the next hop calculation for this neighbor. password password Specifies a password...
  • Page 1658 BGP Configuration Mode Commands ▀ neighbor update-source ip_address Binds the specified IP address to the BGP socket that is...
  • Page 1659BGP Configuration Mode Commands network ▀ network Specifies a network to announce via BGP. Product All Privilege Security Administrator, Administrator...
  • Page 1660 BGP Configuration Mode Commands ▀ redistribute redistribute Redistributes routes via BGP from another protocol to BGP neighbors. Product All...
  • Page 1661BGP Configuration Mode Commands redistribute ▀ The following command removes the redistribution of OSPF routes from the router’s configuration: no...
  • Page 1662 BGP Configuration Mode Commands ▀ router-id router-id Overrides the configured router identifier and causes BGP peers to reset. Product...
  • Page 1663BGP Configuration Mode Commands scan-time ▀ scan-time Configures the BGP background scanner interval. BGP monitors the next hop of the...
  • Page 1664 BGP Configuration Mode Commands ▀ timers timers Configures BGP routing timers. Product All Privilege Security Administrator, Administrator Mode Exec...
  • Page 1665: Chapter 33 BGP IP VRF Configuration Mode CommandsChapter 33 BGP IP VRF Configuration Mode Commands The Border Gateway Protocol (BGP) IP VRF (Virtual Routing and Forwarding) Configuration...
  • Page 1666 BGP IP VRF Configuration Mode Commands ▀ end end Exits the current configuration mode and returns to the Exec...
  • Page 1667BGP IP VRF Configuration Mode Commands exit ▀ exit Exits the current mode and returns to the parent configuration mode....
  • Page 1668 BGP IP VRF Configuration Mode Commands ▀ route-distinguisher route-distinguisher Assigns a route distinguisher (RD) for the VRF that helps...
  • Page 1669BGP IP VRF Configuration Mode Commands route-target ▀ route-target Adds an export and/or import list of extended route target communities...
  • Page 1670 BGP IP VRF Configuration Mode Commands ▀ route-target Usage Use this command to create the list of export and/or...
  • Page 1671: Chapter 34 BITS Port Configuration Mode CommandsChapter 34 BITS Port Configuration Mode Commands The Building Integrated Timing Supply (BITS) port configuration mode allows you to configure...
  • Page 1672 BITS Port Configuration Mode Commands ▀ default default Restores the BITS port’s default speed and communication mode. Product SGSN...
  • Page 1673BITS Port Configuration Mode Commands description ▀ description Defines descriptive text that provides useful information about the BITS port. Product...
  • Page 1674 BITS Port Configuration Mode Commands ▀ end end Exits the current configuration mode and returns to the Exec mode....
  • Page 1675BITS Port Configuration Mode Commands exit ▀ exit Exits the current mode and returns to the parent configuration mode. Product...
  • Page 1676 BITS Port Configuration Mode Commands ▀ mode mode Configures the framing mode for the port. Product SGSN Privilege Security...
  • Page 1677BITS Port Configuration Mode Commands preferred slot ▀ preferred slot Identifies which card in a chassis should assume revertive (redundancy...
  • Page 1678 BITS Port Configuration Mode Commands ▀ recover recover Configures line-timing so the SPIO recovers timing from a port on...
  • Page 1679BITS Port Configuration Mode Commands recover ▀ recover line1 19 Command Line Interface Reference, StarOS Release 17 ▄ 1679
  • Page 1680 BITS Port Configuration Mode Commands ▀ shutdown shutdown Terminates all processes supporting the BITS port or blocks the shutting...
  • Page 1681BITS Port Configuration Mode Commands snmp trap link-status ▀ snmp trap link-status Enables/disables the generation and sending of an SNMP...
  • Page 1682
  • Page 1683: Chapter 35 BMSC Profile Configuration Mode CommandsChapter 35 BMSC Profile Configuration Mode Commands The BMSC Profile Configuration Mode is used to configure Broadcast Multicast Service Center...
  • Page 1684 BMSC Profile Configuration Mode Commands ▀ end end Exits the current configuration mode and returns to the Exec mode....
  • Page 1685BMSC Profile Configuration Mode Commands exit ▀ exit Exits the current mode and returns to the parent configuration mode. Product...
  • Page 1686 BMSC Profile Configuration Mode Commands ▀ gmb diameter dictionary gmb diameter dictionary This command specifies the Diameter dictionary for...
  • Page 1687BMSC Profile Configuration Mode Commands gmb diameter endpoint ▀ gmb diameter endpoint This command specifies the Diameter endpoint name for...
  • Page 1688 BMSC Profile Configuration Mode Commands ▀ gmb diameter peer-select gmb diameter peer-select This command specifies the peer ids of...
  • Page 1689BMSC Profile Configuration Mode Commands gmb diameter peer-select ▀ Usage Use this command to select a BMSC Diameter peer and...
  • Page 1690 BMSC Profile Configuration Mode Commands ▀ gmb user-data gmb user-data This command configures the parameters in this BMSC profile...
  • Page 1691BMSC Profile Configuration Mode Commands gmb user-data ▀ Usage Use this command to configure user data mode and other parameters...
  • Page 1692
  • Page 1693: Chapter 36 BSSGP Cause Code Group Configuration ModeChapter 36 BSSGP Cause Code Group Configuration Mode Commands in this mode enable the operator to define multiple cause codes...
  • Page 1694 BSSGP Cause Code Group Configuration Mode ▀ end end Exits the current configuration mode and returns to the Exec...
  • Page 1695BSSGP Cause Code Group Configuration Mode exit ▀ exit Exits the current mode and returns to the parent configuration mode....
  • Page 1696 BSSGP Cause Code Group Configuration Mode ▀ radio-cause radio-cause Enables the operator to specify one or more cause codes...
  • Page 1697BSSGP Cause Code Group Configuration Mode radio-cause ▀ Example Repeat the command with different cause values to create a group:...
  • Page 1698
  • Page 1699: Chapter 37 Bulk Statistics Configuration Mode CommandsChapter 37 Bulk Statistics Configuration Mode Commands The Bulk Statistics Configuration Mode is used to manage the options for the...
  • Page 1700 Bulk Statistics Configuration Mode Commands ▀ Overview Overview Schema Format String Syntax The following defines common syntax block options....
  • Page 1701Bulk Statistics Configuration Mode Commands aal2 schema ▀ aal2 schema Configures the ATM adaptation layer 2 (AAL2) bulk statistics schema...
  • Page 1702 Bulk Statistics Configuration Mode Commands ▀ aal2 schema The following command creates a schema named aal2stats1 that records the...
  • Page 1703Bulk Statistics Configuration Mode Commands alcap schema ▀ alcap schema Configures the Access Link Control Application Part (ALCAP) bulk statistics...
  • Page 1704 Bulk Statistics Configuration Mode Commands ▀ alcap schema The following command creates a schema named alcap1stats1 that records the...
  • Page 1705Bulk Statistics Configuration Mode Commands apn schema ▀ apn schema Configures the Access Point Name (APN) bulk statistics schema. Product...
  • Page 1706 Bulk Statistics Configuration Mode Commands ▀ apn schema apn schema apn1stats1 format “%sess-curr%” ▄ Command Line Interface Reference, StarOS...
  • Page 1707Bulk Statistics Configuration Mode Commands asngw schema ▀ asngw schema Configures Access Service Gateway (ASN-GW) bulk statistics schema. Product ASN-GW...
  • Page 1708 Bulk Statistics Configuration Mode Commands ▀ asngw schema  VPN Context Identifier: vpnid  ASN-GW Service name: servname ...
  • Page 1709Bulk Statistics Configuration Mode Commands bcmcs schema ▀ bcmcs schema Configures Broadcast and Multicast Service (BCMCS) bulk statistics schema. Product...
  • Page 1710 Bulk Statistics Configuration Mode Commands ▀ bcmcs schema bcmcs schema bcmcs1stats1 format “%sess-curr%” ▄ Command Line Interface Reference, StarOS...
  • Page 1711Bulk Statistics Configuration Mode Commands card schema ▀ card schema Configures card bulk statistics schema. These are statistics for circuit...
  • Page 1712 Bulk Statistics Configuration Mode Commands ▀ card schema Example The following command creates a schema named card1stats1 that records...
  • Page 1713Bulk Statistics Configuration Mode Commands context schema ▀ context schema Configures context bulk statistics schema. Product All Privilege Security Administrator,...
  • Page 1714 Bulk Statistics Configuration Mode Commands ▀ context schema  Total packets sent by firewall: sfw-total-txpackets  Total ICMP packets...
  • Page 1715Bulk Statistics Configuration Mode Commands cscf schema ▀ cscf schema Configures Call Session Control Function (CSCF) bulk statistics schema. Product...
  • Page 1716 Bulk Statistics Configuration Mode Commands ▀ cscf schema  Call attempts transmitted: callatttx  Call successes received: callsuccrx ...
  • Page 1717Bulk Statistics Configuration Mode Commands cs-network-ranap schema ▀ cs-network-ranap schema Configures the Radio Access Network Application Part (RANAP) bulk statistics...
  • Page 1718 Bulk Statistics Configuration Mode Commands ▀ cs-network-ranap schema The following command creates a schema named cs_ranap1stats1 that records the...
  • Page 1719Bulk Statistics Configuration Mode Commands cs-network-rtp schema ▀ cs-network-rtp schema Configures the Real-Time Transport Protocol (RTP) bulk statistics schema in...
  • Page 1720 Bulk Statistics Configuration Mode Commands ▀ cs-network-rtp schema The following command creates a schema named cs_rtp1stats1 that records the...
  • Page 1721Bulk Statistics Configuration Mode Commands cs-network-sccp schema ▀ cs-network-sccp schema Configures the Signalling Connection Control Part (SCCP) bulk statistics schema...
  • Page 1722 Bulk Statistics Configuration Mode Commands ▀ cs-network-sccp schema The following command creates a schema named cs_sccp1stats1 that records the...
  • Page 1723Bulk Statistics Configuration Mode Commands dcca schema ▀ dcca schema Configures Diameter Credit Control Application (DCCA) bulk statistics schema. This...
  • Page 1724 Bulk Statistics Configuration Mode Commands ▀ dcca-group schema dcca-group schema This command configures Diameter Credit Control Application (DCCA) group...
  • Page 1725Bulk Statistics Configuration Mode Commands default ▀ default Restores the system default for the option specified. Product All Privilege Security...
  • Page 1726 Bulk Statistics Configuration Mode Commands ▀ default default transfer-interval ▄ Command Line Interface Reference, StarOS Release 17 1726
  • Page 1727Bulk Statistics Configuration Mode Commands diameter-acct schema ▀ diameter-acct schema Configures Diameter Accounting bulk statistics schema. This command is available...
  • Page 1728 Bulk Statistics Configuration Mode Commands ▀ diameter-auth schema diameter-auth schema Configures Diameter Authentication bulk statistics schema. This command is...
  • Page 1729Bulk Statistics Configuration Mode Commands dlci-util schema ▀ dlci-util schema Configures the collection of statistics for the DLCI-Util (DLCI utilization)...
  • Page 1730 Bulk Statistics Configuration Mode Commands ▀ dlci-util schema Multiple schemas can be created to categorize DLCI-Util bulk statistics. All...
  • Page 1731Bulk Statistics Configuration Mode Commands dpca schema ▀ dpca schema Configures Diameter Policy Control Application (DPCA) bulk statistics schema. This...
  • Page 1732 Bulk Statistics Configuration Mode Commands ▀ ecs schema ecs schema Configures Enhanced Charging Service (ECS) bulk statistics schema. Product...
  • Page 1733Bulk Statistics Configuration Mode Commands egtpc schema ▀ egtpc schema Configures the enhanced GTP-C statistics schema for naming conventions of...
  • Page 1734 Bulk Statistics Configuration Mode Commands ▀ egtpc schema Usage Use this command to define schemas for enhanced GTP-C bulk...
  • Page 1735Bulk Statistics Configuration Mode Commands end ▀ end Exits the current configuration mode and returns to the Exec mode. Product...
  • Page 1736 Bulk Statistics Configuration Mode Commands ▀ exit exit Exits the current mode and returns to the parent configuration mode....
  • Page 1737Bulk Statistics Configuration Mode Commands fa schema ▀ fa schema Configures Foreign Agent (FA) bulk statistics schema. Product All Privilege...
  • Page 1738 Bulk Statistics Configuration Mode Commands ▀ fa schema To create a FA-level schema named faservicestats that separates the date,...
  • Page 1739Bulk Statistics Configuration Mode Commands file ▀ file Enters the Bulk Statistics File Configuration Mode which supports the configuration of...
  • Page 1740 Bulk Statistics Configuration Mode Commands ▀ file Manager is configured as a receiver. In this case, the bulk statistics...
  • Page 1741Bulk Statistics Configuration Mode Commands fng schema ▀ fng schema Configures Femto Network Gateway (FNG) bulk statistics schema. Product FNG...
  • Page 1742 Bulk Statistics Configuration Mode Commands ▀ footer footer Configures the footer string placed at the end of the generated...
  • Page 1743Bulk Statistics Configuration Mode Commands footer ▀ Usage Define a unique footer in data files which allows for easy identification...
  • Page 1744 Bulk Statistics Configuration Mode Commands ▀ gather-on-standby gather-on-standby Controls whether or not statistics are gathered when a system is...
  • Page 1745Bulk Statistics Configuration Mode Commands gprs schema ▀ gprs schema Configures the collection of statistics for the GPRS schema. Product...
  • Page 1746 Bulk Statistics Configuration Mode Commands ▀ gprs schema Example Include the bulk statistic variable names to create a GPRS...
  • Page 1747Bulk Statistics Configuration Mode Commands gtpc schema ▀ gtpc schema Configures GPRS Tunneling Protocol-Control (GTPC) message statistics schema. Product GGSN...
  • Page 1748 Bulk Statistics Configuration Mode Commands ▀ gtpc schema create multiple GTPC schemas, re-issue the gtpc schema schema_name command using...
  • Page 1749Bulk Statistics Configuration Mode Commands gtpp schema ▀ gtpp schema Configures GPRS Tunneling Protocol-Prime (GTPP) statistics schema. Product GGSN SGSN...
  • Page 1750 Bulk Statistics Configuration Mode Commands ▀ gtpp schema Usage Use this command to define schemas for GTPP bulk statistics...
  • Page 1751Bulk Statistics Configuration Mode Commands gtpu schema ▀ gtpu schema Configures GTP-U bulk statistics schema. Product GGSN HNB-GW P-GW S-GW...
  • Page 1752 Bulk Statistics Configuration Mode Commands ▀ gtpu schema Usage Use this command to define schemas for GTP-U bulk statistics...
  • Page 1753Bulk Statistics Configuration Mode Commands ha schema ▀ ha schema Configures Home Agent (HA) bulk statistics schema. Product HA Privilege...
  • Page 1754 Bulk Statistics Configuration Mode Commands ▀ ha schema  Number of HA authentication failures: reply-haauthfail  Number of Mobile...
  • Page 1755Bulk Statistics Configuration Mode Commands header ▀ header Configures the header string placed at the beginning of the generated bulk...
  • Page 1756 Bulk Statistics Configuration Mode Commands ▀ header Usage Define a unique header in data files which allows for easy...
  • Page 1757Bulk Statistics Configuration Mode Commands hnbgw-hnbap schema ▀ hnbgw-hnbap schema Configures bulk statistics schema for HNB-Application Part (HNB-AP) message statistics...
  • Page 1758 Bulk Statistics Configuration Mode Commands ▀ hnbgw-hnbap schema The following command creates a schema named hnbap1stats1 that records the...
  • Page 1759Bulk Statistics Configuration Mode Commands hnbgw-hnbap-access-closed schema ▀ hnbgw-hnbap-access-closed schema Configures bulk statistics schema for HNB-Application Part (HNB-AP) message statistics...
  • Page 1760 Bulk Statistics Configuration Mode Commands ▀ hnbgw-hnbap-access-closed schema The following command creates a schema named hnbapclosed1stats1 that records the...
  • Page 1761Bulk Statistics Configuration Mode Commands hnbgw-hnbap-access-hybrid schema ▀ hnbgw-hnbap-access-hybrid schema Configures bulk statistics schema for HNB-Application Part (HNB-AP) message statistics...
  • Page 1762 Bulk Statistics Configuration Mode Commands ▀ hnbgw-hnbap-access-hybrid schema The following command creates a schema named hnbaphyb1stats1 that records the...
  • Page 1763Bulk Statistics Configuration Mode Commands hnbgw-hnbap-access-open schema ▀ hnbgw-hnbap-access-open schema Configures bulk statistics schema for HNB-Application Part (HNB-AP) message statistics...
  • Page 1764 Bulk Statistics Configuration Mode Commands ▀ hnbgw-hnbap-access-open schema The following command creates a schema named hnbapopen1stats1 that records the...
  • Page 1765Bulk Statistics Configuration Mode Commands hnbgw-ranap schema ▀ hnbgw-ranap schema Configures bulk statistics schema for Radio Access Network-Application Part (RANAP)...
  • Page 1766 Bulk Statistics Configuration Mode Commands ▀ hnbgw-ranap schema The following command creates a schema named ranap1stats1 that records the...
  • Page 1767Bulk Statistics Configuration Mode Commands hnbgw-ranap-access-closed schema ▀ hnbgw-ranap-access-closed schema Configures bulk statistics schema for Radio Access Network-Application Part (RANAP)...
  • Page 1768 Bulk Statistics Configuration Mode Commands ▀ hnbgw-ranap-access-closed schema The following command creates a schema named ranapclosed1stats1 that records the...
  • Page 1769Bulk Statistics Configuration Mode Commands hnbgw-ranap-access-hybrid schema ▀ hnbgw-ranap-access-hybrid schema Configures bulk statistics schema for Radio Access Network-Application Part (RANAP)...
  • Page 1770 Bulk Statistics Configuration Mode Commands ▀ hnbgw-ranap-access-hybrid schema The following command creates a schema named ranaphyb1stats1 that records the...
  • Page 1771Bulk Statistics Configuration Mode Commands hnbgw-ranap-access-open schema ▀ hnbgw-ranap-access-open schema Configures bulk statistics schema for Radio Access Network-Application Part (RANAP)...
  • Page 1772 Bulk Statistics Configuration Mode Commands ▀ hnbgw-ranap-access-open schema The following command creates a schema named ranapopen1stats1 that records the...
  • Page 1773Bulk Statistics Configuration Mode Commands hnbgw-rtp schema ▀ hnbgw-rtp schema Configures bulk statistics schema for Real-Time Protocol (RTP) message statistics...
  • Page 1774 Bulk Statistics Configuration Mode Commands ▀ hnbgw-rtp schema The following command creates a schema named rtp1stats1 that records the...
  • Page 1775Bulk Statistics Configuration Mode Commands hnbgw-rtp-access-closed schema ▀ hnbgw-rtp-access-closed schema Configures bulk statistics schema for Real-Time Protocol (RTP) message statistics...
  • Page 1776 Bulk Statistics Configuration Mode Commands ▀ hnbgw-rtp-access-closed schema The following command creates a schema named rtpclosed1stats1 that records the...
  • Page 1777Bulk Statistics Configuration Mode Commands hnbgw-rtp-access-hybrid schema ▀ hnbgw-rtp-access-hybrid schema Configures bulk statistics schema for Real-Time Protocol (RTP) message statistics...
  • Page 1778 Bulk Statistics Configuration Mode Commands ▀ hnbgw-rtp-access-hybrid schema The following command creates a schema named rtphyb1stats1 that records the...
  • Page 1779Bulk Statistics Configuration Mode Commands hnbgw-rtp-access-open schema ▀ hnbgw-rtp-access-open schema Configures bulk statistics schema for Real-Time Protocol (RTP) message statistics...
  • Page 1780 Bulk Statistics Configuration Mode Commands ▀ hnbgw-rtp-access-open schema The following command creates a schema named rtpopen1stats1 that records the...
  • Page 1781Bulk Statistics Configuration Mode Commands hnbgw-rua schema ▀ hnbgw-rua schema Configures bulk statistics schema for RANAP User Adaptation (RUA) protocol...
  • Page 1782 Bulk Statistics Configuration Mode Commands ▀ hnbgw-rua schema The following command creates a schema named rua1stats1 that records the...
  • Page 1783Bulk Statistics Configuration Mode Commands hnbgw-rua-access-closed schema ▀ hnbgw-rua-access-closed schema Configures bulk statistics schema for RANAP User Adaptation (RUA) protocol...
  • Page 1784 Bulk Statistics Configuration Mode Commands ▀ hnbgw-rua-access-closed schema The following command creates a schema named ruaclosed1stats1 that records the...
  • Page 1785Bulk Statistics Configuration Mode Commands hnbgw-rua-access-hybrid schema ▀ hnbgw-rua-access-hybrid schema Configures bulk statistics schema for RANAP User Adaptation (RUA) protocol...
  • Page 1786 Bulk Statistics Configuration Mode Commands ▀ hnbgw-rua-access-hybrid schema The following command creates a schema named ruahyb1stats1 that records the...
  • Page 1787Bulk Statistics Configuration Mode Commands hnbgw-rua-access-open schema ▀ hnbgw-rua-access-open schema Configures bulk statistics schema for RANAP User Adaptation (RUA) protocol...
  • Page 1788 Bulk Statistics Configuration Mode Commands ▀ hnbgw-rua-access-open schema The following command creates a schema named ruaopen1stats1 that records the...
  • Page 1789Bulk Statistics Configuration Mode Commands hnbgw-sctp schema ▀ hnbgw-sctp schema Configures bulk statistics schema for Stream Control Transmission Protocol (SCTP)...
  • Page 1790 Bulk Statistics Configuration Mode Commands ▀ hnbgw-sctp schema The following command creates a schema named sctp1stats1 that records the...
  • Page 1791Bulk Statistics Configuration Mode Commands hsgw schema ▀ hsgw schema Configures HRPD Serving Gateway (HSGW) bulk statistics schema. Product HSGW...
  • Page 1792 Bulk Statistics Configuration Mode Commands ▀ hss schema hss schema Configures Home Subscriber Service (HSS) bulk statistics schema. Product...
  • Page 1793Bulk Statistics Configuration Mode Commands hss schema ▀ To create an hss schema named hss_stats that specifies a schema format...
  • Page 1794 Bulk Statistics Configuration Mode Commands ▀ imsa schema imsa schema Configures IP Multimedia System Authorization (IMSA) bulk statistics schema....
  • Page 1795Bulk Statistics Configuration Mode Commands imsa schema ▀ Usage Use this command to define schemas for IMSA bulk statistics collection...
  • Page 1796 Bulk Statistics Configuration Mode Commands ▀ ippool schema ippool schema Configures IP pool bulk statistics schema. Product All Privilege...
  • Page 1797Bulk Statistics Configuration Mode Commands ippool schema ▀  Number of IP addresses on hold: hold  Number of free...
  • Page 1798 Bulk Statistics Configuration Mode Commands ▀ ipsg schema ipsg schema Configures IP Services Gateway (IPSG) bulk statistics schema. Product...
  • Page 1799Bulk Statistics Configuration Mode Commands ipsg schema ▀  Service name: servname  Total responses sent: total-rsp-sent Use the following...
  • Page 1800 Bulk Statistics Configuration Mode Commands ▀ lac schema lac schema Configures LAC (L2TP Access Concentrator) bulk statistics schema. Product...
  • Page 1801Bulk Statistics Configuration Mode Commands lac schema ▀ lac schema lac1stats1 format “%sess-curactive%-%sess-maxtunnel%” To create a schema named lacresourcestats that...
  • Page 1802 Bulk Statistics Configuration Mode Commands ▀ limit limit Configures the maximum amount of system memory bulk statistics may utilize....
  • Page 1803Bulk Statistics Configuration Mode Commands lma schema ▀ lma schema Configures the Local Mobility Anchor (LMA) statistics schema for the...
  • Page 1804 Bulk Statistics Configuration Mode Commands ▀ lma schema  Binding Update Received: bindupd  Binding Update Received - Denied:...
  • Page 1805Bulk Statistics Configuration Mode Commands lns schema ▀ lns schema Configures LNS (L2TP Network Server) bulk statistics schema. Product LNS...
  • Page 1806 Bulk Statistics Configuration Mode Commands ▀ local-directory local-directory Sets the local directory for storing bulkstats collection files. Product All...
  • Page 1807Bulk Statistics Configuration Mode Commands mag schema ▀ mag schema Configures the Mobile Access Gateway (MAG) statistics schema for naming...
  • Page 1808 Bulk Statistics Configuration Mode Commands ▀ mag schema Example For a MAG-level schema named magservicestats that specifies a schema...
  • Page 1809Bulk Statistics Configuration Mode Commands mipv6ha schema ▀ mipv6ha schema Configures MIPv6 HA (home Agent) bulk statistics schema. Product HA...
  • Page 1810 Bulk Statistics Configuration Mode Commands ▀ mipv6ha schema mipv6ha schema mipv6haservicestats format “%aaa-actauthfail%” ▄ Command Line Interface Reference, StarOS...
  • Page 1811Bulk Statistics Configuration Mode Commands mme schema ▀ mme schema Configures MME (Mobility Management Entity) bulk statistics schema. Product MME...
  • Page 1812 Bulk Statistics Configuration Mode Commands ▀ mme schema mme schema mmeservice_s1ap_cfg_transfersformat “s1ap-trnsdata-cfg-tfr ▄ Command Line Interface Reference, StarOS Release...
  • Page 1813Bulk Statistics Configuration Mode Commands mvs schema ▀ mvs schema Configures MVS (Mobile Videoscape) bulk statistics schema. Product MVG Privilege...
  • Page 1814 Bulk Statistics Configuration Mode Commands ▀ nat-realm schema nat-realm schema Creates and configures Network Address Translation (NAT) realm statistics...
  • Page 1815Bulk Statistics Configuration Mode Commands p2p schema ▀ p2p schema Creates and configures P2P (Peer-to-Peer) statistics schema. Product ADC Privilege...
  • Page 1816 Bulk Statistics Configuration Mode Commands ▀ pcc-af schema pcc-af schema Configures Policy and Charging Control-Application Function (PCC-AF) service bulk...
  • Page 1817Bulk Statistics Configuration Mode Commands pcc-af schema ▀ The following command creates a schema named pcc_af1stats1 that records the total...
  • Page 1818 Bulk Statistics Configuration Mode Commands ▀ pcc-policy schema pcc-policy schema Configures Policy and Charging Control-Policy (PCC-Policy) service bulk statistics...
  • Page 1819Bulk Statistics Configuration Mode Commands pcc-policy schema ▀ The following command creates a schema named pcc_plcy1stats1 that records the total...
  • Page 1820 Bulk Statistics Configuration Mode Commands ▀ pcc-profile schema pcc-profile schema Configures Policy and Charging Control Profile (PCC-Profile) bulk statistics...
  • Page 1821Bulk Statistics Configuration Mode Commands pcc-profile schema ▀ The following command creates a schema named pcc_profile1stats1 that records the total...
  • Page 1822 Bulk Statistics Configuration Mode Commands ▀ pcc-sp-endpt schema pcc-sp-endpt schema Configures the bulkstats schema at the Sp interface endpoint...
  • Page 1823Bulk Statistics Configuration Mode Commands pcc-sp-endpt schema ▀ The following command creates a schema named pcc_sp1stats1 that records the total...
  • Page 1824 Bulk Statistics Configuration Mode Commands ▀ pcc-service schema pcc-service schema Configures Policy and Charging Control-Service (PCC-Service) bulk statistics schema....
  • Page 1825Bulk Statistics Configuration Mode Commands pcc-service schema ▀ pcc-service schema pcc_svc1stats1 format “%vpnname%-%vpnid%-%servname%- %total-gx-processed%-%total-gy-processed%” Command Line Interface Reference, StarOS Release...
  • Page 1826 Bulk Statistics Configuration Mode Commands ▀ pdif schema pdif schema Configures Packet Data Interworking Function (PDIF) bulk statistics schema....
  • Page 1827Bulk Statistics Configuration Mode Commands pdif schema ▀ pdif schema pdifschema1 format %sess-curactip4% Command Line Interface Reference, StarOS Release 17...
  • Page 1828 Bulk Statistics Configuration Mode Commands ▀ pgw schema pgw schema Configures Packet Data Network Gateway (P-GW) bulk statistics schema....
  • Page 1829Bulk Statistics Configuration Mode Commands port schema ▀ port schema Configures port bulk statistics schema. Product All Privilege Security Administrator,...
  • Page 1830 Bulk Statistics Configuration Mode Commands ▀ port schema Example To create a port-level schema named portstats1 that separates the...
  • Page 1831Bulk Statistics Configuration Mode Commands ppp schema ▀ ppp schema Configures Point-to-Point Protocol (PPP) bulk statistics schema. Product All Privilege...
  • Page 1832 Bulk Statistics Configuration Mode Commands ▀ ppp schema  Auth. Attempts: auth-attempt-chapAuth. Successes: auth-success-chap  PAP: (Password Authentication Protocol)...
  • Page 1833Bulk Statistics Configuration Mode Commands ps-network-gtpu schema ▀ ps-network-gtpu schema Configures the GTP-U bulk statistics schema in a Packet Switched...
  • Page 1834 Bulk Statistics Configuration Mode Commands ▀ ps-network-gtpu schema The following command creates a schema named ps_gtpu1stats1 that records the...
  • Page 1835Bulk Statistics Configuration Mode Commands ps-network-ranap schema ▀ ps-network-ranap schema Configures the Radio Access Network Application Part (RANAP) bulk statistics...
  • Page 1836 Bulk Statistics Configuration Mode Commands ▀ ps-network-ranap schema The following command creates a schema named ps_ranap1stats1 that records the...
  • Page 1837Bulk Statistics Configuration Mode Commands ps-network-sccp schema ▀ ps-network-sccp schema Configures the Signalling Connection Control Part (SCCP) bulk statistics schema...
  • Page 1838 Bulk Statistics Configuration Mode Commands ▀ ps-network-sccp schema The following command creates a schema named ps_sccp1stats1 that records the...
  • Page 1839Bulk Statistics Configuration Mode Commands radius schema ▀ radius schema Configures RADIUS bulk statistics schema. Product PDSN GGSN Privilege Security...
  • Page 1840 Bulk Statistics Configuration Mode Commands ▀ radius schema  Server: ipaddr  Authentication Requests Sent: auth-req-sent  Accounting Requests...
  • Page 1841Bulk Statistics Configuration Mode Commands radius-group schema ▀ radius-group schema Configures RADIUS group bulk statistics schema. Product PDSN GGSN Privilege...
  • Page 1842 Bulk Statistics Configuration Mode Commands ▀ radius-group schema  Server: ipaddr  Authentication Requests Sent: auth-req-sent  Accounting Requests...
  • Page 1843Bulk Statistics Configuration Mode Commands receiver ▀ receiver Configures a host system to receive bulkstats information through Trivial File Transfer...
  • Page 1844 Bulk Statistics Configuration Mode Commands ▀ receiver mechanism { { { ftp | sftp } login user_name [ encrypted...
  • Page 1845Bulk Statistics Configuration Mode Commands remotefile ▀ remotefile Configures the naming convention with support for multiple file format to multiple...
  • Page 1846 Bulk Statistics Configuration Mode Commands ▀ remotefile Variable Description Data Type sysuptime The uptime (in seconds) of the system...
  • Page 1847Bulk Statistics Configuration Mode Commands rlf schema ▀ rlf schema Configures the aggregated information for Rate Limiting Function (RLF) context...
  • Page 1848 Bulk Statistics Configuration Mode Commands ▀ rlf schema  Time: time  Number of Authentication Denials: deny-auth Use the...
  • Page 1849Bulk Statistics Configuration Mode Commands rlf-detailed schema ▀ rlf-detailed schema Configures the detailed instance level information for RLF context statistics...
  • Page 1850 Bulk Statistics Configuration Mode Commands ▀ rlf-detailed schema  Date: date  Time: time  Number of Authentication Denials:...
  • Page 1851Bulk Statistics Configuration Mode Commands rp schema ▀ rp schema Configures R-P bulk statistics schema. Product PDSN Privilege Security Administrator,...
  • Page 1852 Bulk Statistics Configuration Mode Commands ▀ rp schema  Time: time  Number of Authentication Denials: deny-auth Use the...
  • Page 1853Bulk Statistics Configuration Mode Commands saegw schema ▀ saegw schema Configures System Architecture Evolution Gateway (SAEGW) bulk statistics schema. Product...
  • Page 1854 Bulk Statistics Configuration Mode Commands ▀ sample-interval sample-interval Configures the time interval between collecting local statistics. Product All Privilege...
  • Page 1855Bulk Statistics Configuration Mode Commands sbc schema ▀ sbc schema Configures the collection of statistics for the SBc schema. Product...
  • Page 1856 Bulk Statistics Configuration Mode Commands ▀ sbc schema Include the bulk statistic variable names to create an SBc schema...
  • Page 1857Bulk Statistics Configuration Mode Commands sccp schema ▀ sccp schema Configures the collection of statistics for the SCCP schema. Product...
  • Page 1858 Bulk Statistics Configuration Mode Commands ▀ sccp schema Example Include the bulk statistic variable names to create an SCCP...
  • Page 1859Bulk Statistics Configuration Mode Commands schema ▀ schema Configures the system-level bulk statistics schema. Product All Privilege Security Administrator, Administrator...
  • Page 1860 Bulk Statistics Configuration Mode Commands ▀ schema schema systemstats1 format “%sess-cursipconn% - %sess-curmipconn%” To create a system-level schema named...
  • Page 1861Bulk Statistics Configuration Mode Commands sgs schema ▀ sgs schema Configures the collection of statistics for the SGs schema. Product...
  • Page 1862 Bulk Statistics Configuration Mode Commands ▀ sgs schema Include the bulk statistic variable names to create an SGs schema...
  • Page 1863Bulk Statistics Configuration Mode Commands sgs-vlr schema ▀ sgs-vlr schema Configures the collection of statistics for the SGs-VLR schema. Product...
  • Page 1864 Bulk Statistics Configuration Mode Commands ▀ sgs-vlr schema Include the bulk statistic variable names to create an SGs-VLR schema...
  • Page 1865Bulk Statistics Configuration Mode Commands sgsn schema ▀ sgsn schema Configures the collection of statistics for the SGSN schema. Product...
  • Page 1866 Bulk Statistics Configuration Mode Commands ▀ sgsn schema Include the bulk statistic variable names to create an SGSN schema...
  • Page 1867Bulk Statistics Configuration Mode Commands sgtp schema ▀ sgtp schema Configures the collection of the SGSN’s GTP-C and GTP-U activity...
  • Page 1868 Bulk Statistics Configuration Mode Commands ▀ sgtp schema Include the bulk statistic variable names to create an SGTP schema...
  • Page 1869Bulk Statistics Configuration Mode Commands sgw schema ▀ sgw schema Configures the collection of the S-GW activity statistics. Product S-GW...
  • Page 1870 Bulk Statistics Configuration Mode Commands ▀ sgw schema Example Include the bulk statistic variable names to create an S-GW...
  • Page 1871Bulk Statistics Configuration Mode Commands show variables ▀ show variables Displays the bulk statistics variable information based on schema names....
  • Page 1872 Bulk Statistics Configuration Mode Commands ▀ show variables  diameter-auth  dlci-util  dpca  ecs  egtpc ...
  • Page 1873Bulk Statistics Configuration Mode Commands show variables ▀  pcc-service  pcc-sp-endpt  pdg  pdif  pgw  phsgw...
  • Page 1874 Bulk Statistics Configuration Mode Commands ▀ sls schema sls schema Configures the collection of statistics for the SLs schema....
  • Page 1875Bulk Statistics Configuration Mode Commands sls schema ▀ Include the bulk statistic variable names to create an SLs schema named...
  • Page 1876 Bulk Statistics Configuration Mode Commands ▀ ss7link schema ss7link schema Configures the collection of the SS7 link activity statistics....
  • Page 1877Bulk Statistics Configuration Mode Commands ss7link schema ▀ Multiple collection schemas can be created to categorize SS7 link bulk statistics....
  • Page 1878 Bulk Statistics Configuration Mode Commands ▀ ss7rd schema ss7rd schema Configures the collection of bulk statistics for SS7 routing...
  • Page 1879Bulk Statistics Configuration Mode Commands ss7rd schema ▀ Multiple collection schemas can be created to categorize SS7 routing domain bulk...
  • Page 1880 Bulk Statistics Configuration Mode Commands ▀ tai schema tai schema Configures TAI (Tracking Area Identifier) bulk statistics schema. Product...
  • Page 1881Bulk Statistics Configuration Mode Commands tai schema ▀ Important: To enable collection of TAI schema bulk statistics, you must issue...
  • Page 1882 Bulk Statistics Configuration Mode Commands ▀ transfer-interval transfer-interval Configures the frequency of transfer of collected statistics to the receiver....
  • Page 1883Bulk Statistics Configuration Mode Commands vlan-npu schema ▀ vlan-npu schema Configures the collection of VLAN-NPU activity statistics. Important: The VLAN-NPU...
  • Page 1884 Bulk Statistics Configuration Mode Commands ▀ vlan-npu schema Multiple VLAN-NPU schemas can be created to categorize VLAN-NPU bulk statistics....
  • Page 1885: Chapter 38 Bulk Statistics File Configuration Mode CommandsChapter 38 Bulk Statistics File Configuration Mode Commands This section describes a bulk statistic “file” under which to group the...
  • Page 1886
  • Page 1887: Chapter 39 Call Control Profile Configuration ModeChapter 39 Call Control Profile Configuration Mode Call Control Profile configuration mode defines call-handling rules which can be combined with...
  • Page 1888 Call Control Profile Configuration Mode ▀ access-restriction-data access-restriction-data Enables the operator to assign a failure code to be included...
  • Page 1889Call Control Profile Configuration Mode access-restriction-data ▀  8 - GPRS services and non-GPRS services not allowed  9 -...
  • Page 1890 Call Control Profile Configuration Mode ▀ accounting context accounting context Defines the name of the accounting context and optionally...
  • Page 1891Call Control Profile Configuration Mode accounting context ▀ Usage This command can be used to associate a predefined GTPP server...
  • Page 1892 Call Control Profile Configuration Mode ▀ accounting mode accounting mode Configures the mode to be used for accounting –...
  • Page 1893Call Control Profile Configuration Mode accounting stop-trigger ▀ accounting stop-trigger Configures the trigger point for accounting stop CDR. Default is...
  • Page 1894 Call Control Profile Configuration Mode ▀ allocate-ptmsi-signature allocate-ptmsi-signature Enables or disables the allocation of a P-TMSI (Packet Temporary Mobile...
  • Page 1895Call Control Profile Configuration Mode apn-restriction ▀ apn-restriction Enables the APN restriction feature and configures the instruction for the SGSN...
  • Page 1896 Call Control Profile Configuration Mode ▀ apn-restriction restriction is always de-activated. Therefore in the case of S4-SGSN, this CLI...
  • Page 1897Call Control Profile Configuration Mode associate ▀ associate Associates various MME -specific lists and databases with this call control profile....
  • Page 1898 Call Control Profile Configuration Mode ▀ associate hss-peer-service service_name Associates a home subscriber server (HSS) peer service with this...
  • Page 1899Call Control Profile Configuration Mode associate ▀ associate ho-restrict-list HOrestrict1 The following command associates this SaMOG call control profile with...
  • Page 1900 Call Control Profile Configuration Mode ▀ attach access-type attach access-type Defines attach-related configuration parameters for this call control profile...
  • Page 1901Call Control Profile Configuration Mode attach access-type ▀ location-area-list instance list_id Instructs the SGSN to apply the command action to...
  • Page 1902 Call Control Profile Configuration Mode ▀ attach access-type  101 - Message not compatible with the protocol state ...
  • Page 1903Call Control Profile Configuration Mode attach access-type ▀  Use the attach allow command to re-enable restrictions after an attach...
  • Page 1904 Call Control Profile Configuration Mode ▀ attach allow attach allow Configures the system to re-enable attaches that were previously...
  • Page 1905Call Control Profile Configuration Mode attach allow ▀ Usage Once the IMSI of an incoming call is known and matched...
  • Page 1906 Call Control Profile Configuration Mode ▀ attach imei-query-type attach imei-query-type Defines device Attach limitations for this call control profile...
  • Page 1907Call Control Profile Configuration Mode attach imei-query-type ▀ Usage Configures system settings related to the UE Attach procedure for the...
  • Page 1908 Call Control Profile Configuration Mode ▀ attach restrict attach restrict Configures the system to restrict attaches based on access...
  • Page 1909Call Control Profile Configuration Mode attach restrict ▀  tracking-area-not-allowed The default cause code is no-suitable-cell-in-tracking-area. Important: The tracking-area-not-allowed cause...
  • Page 1910 Call Control Profile Configuration Mode ▀ attach restrict Usage Once the IMSI of an incoming call is known and...
  • Page 1911Call Control Profile Configuration Mode attach restrict ▀ attach restrict access-type gprs all attach access-type grps all failure-code 22 Command...
  • Page 1912 Call Control Profile Configuration Mode ▀ authenticate all-events authenticate all-events Allows the operator to quickly define authentication procedures, based...
  • Page 1913Call Control Profile Configuration Mode authenticate all-events ▀ Usage By default, authentication is not performed for any subscriber events. Use...
  • Page 1914 Call Control Profile Configuration Mode ▀ authenticate attach authenticate attach Allows the operator to define authentication for Attach procedures....
  • Page 1915Call Control Profile Configuration Mode authenticate attach ▀ attach-type This keyword configures the Attach authentication based on the type of...
  • Page 1916 Call Control Profile Configuration Mode ▀ authenticate context authenticate context This command allows you to specify the authentication group,...
  • Page 1917Call Control Profile Configuration Mode authenticate context ▀ Usage Use this command to specify the authentication group, context, and type...
  • Page 1918 Call Control Profile Configuration Mode ▀ authenticate detach authenticate detach Allows the operator to enable and define authentication for...
  • Page 1919Call Control Profile Configuration Mode authenticate on-first-vector ▀ authenticate on-first-vector Allows the operator to enable the SGSN to begin MS...
  • Page 1920 Call Control Profile Configuration Mode ▀ authenticate rau authenticate rau Enables or disables and fine tunes authentication procedures for...
  • Page 1921Call Control Profile Configuration Mode authenticate rau ▀ frequency frequency Defines 1-in-N selective authentication for RAU events. If the frequency...
  • Page 1922 Call Control Profile Configuration Mode ▀ authenticate service-request authenticate service-request Enables or disables and fine-tunes authentication procedures for Service...
  • Page 1923Call Control Profile Configuration Mode authenticate service-request ▀  signaling Usage By default, authentication is not performed for Service Requests....
  • Page 1924 Call Control Profile Configuration Mode ▀ authenticate sms authenticate sms Enables or disables and fine tunes authentication procedures for...
  • Page 1925Call Control Profile Configuration Mode authenticate sms ▀  mo-sms: mobile-originated SMS  mt-sms: mobile-terminated SMS Usage By default, authentication...
  • Page 1926 Call Control Profile Configuration Mode ▀ authenticate tau authenticate tau Allows the operator to enable/disable and fine-tune authentication for...
  • Page 1927Call Control Profile Configuration Mode authenticate tau ▀ The following command configures TAU authentication to occur when there is 15...
  • Page 1928 Call Control Profile Configuration Mode ▀ cc cc Defines the charging characteristics to be applied for CDR generation when...
  • Page 1929Call Control Profile Configuration Mode cc ▀ Setting the profile index bis selects different charging trigger profiles to be used...
  • Page 1930 Call Control Profile Configuration Mode ▀ check-zone-code check-zone-code Enables or disables the zone code checking mechanism. Product SGSN Privilege...
  • Page 1931Call Control Profile Configuration Mode ciphering-algorithm-gprs ▀ ciphering-algorithm-gprs Defines the order of preference of the ciphering algorithms. Product SGSN Privilege...
  • Page 1932 Call Control Profile Configuration Mode ▀ csfb csfb Configures circuit-switched fallback options. CSFB is the mechanism to move a...
  • Page 1933Call Control Profile Configuration Mode csfb ▀ Usage Use this command to restrict the circuit-switched fallback function to SMS only...
  • Page 1934 Call Control Profile Configuration Mode ▀ description description Allows you to enter a relevant descriptive string. Product MME SAEGW...
  • Page 1935Call Control Profile Configuration Mode diameter-result-code-mapping ▀ diameter-result-code-mapping Maps an EMM (EPS Mobility Management) NAS (Network Access Server) cause code...
  • Page 1936 Call Control Profile Configuration Mode ▀ diameter-result-code-mapping  diameter-unsupported-feature - s6a result code 5011. Default mapped EMM code: “Network...
  • Page 1937Call Control Profile Configuration Mode direct-tunnel ▀ direct-tunnel Allows direct tunneling if direct tunneling is supported by the destination node....
  • Page 1938 Call Control Profile Configuration Mode ▀ dns-ggsn dns-ggsn Defines the context to be used to do DNS lookup for...
  • Page 1939Call Control Profile Configuration Mode dns-mrme ▀ dns-mrme This command is used to configure the DNS client context and DNS...
  • Page 1940 Call Control Profile Configuration Mode ▀ dns-mrme Important: This keyword is available only when the SaMOG Mixed Mode license...
  • Page 1941Call Control Profile Configuration Mode dns-msc ▀ dns-msc Defines the context to be used to do DNS lookup for Mobile...
  • Page 1942 Call Control Profile Configuration Mode ▀ dns-sgsn dns-sgsn Identifies the context to be used to do DNS to find...
  • Page 1943Call Control Profile Configuration Mode dns-pgw ▀ dns-pgw Defines the context to be used to do DNS lookup for P-GWs....
  • Page 1944 Call Control Profile Configuration Mode ▀ dns-sgw dns-sgw Defines the context to be used to do DNS lookup for...
  • Page 1945Call Control Profile Configuration Mode egtp ▀ egtp Configures the type of PLMN sent in either the user location information...
  • Page 1946 Call Control Profile Configuration Mode ▀ eir-profile eir-profile Identifies and associates an EIR profile to be used by the...
  • Page 1947Call Control Profile Configuration Mode encryption-algorithm-lte ▀ encryption-algorithm-lte Defines the priorities for using the encryption algorithms. Product MME Privilege Administrator...
  • Page 1948 Call Control Profile Configuration Mode ▀ encryption-algorithm-umts encryption-algorithm-umts Defines the priorities for using the encryption algorithms. Product SGSN Privilege...
  • Page 1949Call Control Profile Configuration Mode end ▀ end Exits the current configuration mode and returns to the Exec mode. Product...
  • Page 1950 Call Control Profile Configuration Mode ▀ equivalent-plmn equivalent-plmn Configures the definition for an equivalent public land mobile network identifier...
  • Page 1951Call Control Profile Configuration Mode equivalent-plmn ▀ priority priority Enter an integer between 1 and 15 with the highest priority...
  • Page 1952 Call Control Profile Configuration Mode ▀ exit exit Exits the current mode and returns to the parent configuration mode....
  • Page 1953Call Control Profile Configuration Mode gmm Extended-T3312-timeout ▀ gmm Extended-T3312-timeout This command enables the operator to determine how the SGSN...
  • Page 1954 Call Control Profile Configuration Mode ▀ gmm Extended-T3312-timeout Usage An Extended-T3312-timeout configuration in the Call-Control Profile will override an...
  • Page 1955Call Control Profile Configuration Mode gmm information-in-messages ▀ gmm information-in-messages Provides the configuration to include the information in messages for...
  • Page 1956 Call Control Profile Configuration Mode ▀ gmm information-in-messages send-after{ attach | rau } This keyword configures the information in...
  • Page 1957Call Control Profile Configuration Mode gmm rau-accept ▀ gmm rau-accept Provides the configuration to set the Follow-On Proceed (FOP) bit...
  • Page 1958 Call Control Profile Configuration Mode ▀ gmm retrieve-equipment-identity gmm retrieve-equipment-identity Configures the International Mobile Equipment Identity (IMEI) or software...
  • Page 1959Call Control Profile Configuration Mode gmm retrieve-equipment-identity ▀ imeisv [ unciphered ] [ then-imei ] Indicates the equipment identity retrieval...
  • Page 1960 Call Control Profile Configuration Mode ▀ gmm t3346 gmm t3346 The gmm command includes a new keyword to set...
  • Page 1961Call Control Profile Configuration Mode gmm t3346 ▀ gmm t3346 min 2 max 15 Command Line Interface Reference, StarOS Release...
  • Page 1962 Call Control Profile Configuration Mode ▀ gs-service gs-service Associates the context of a Gs service interface with this call...
  • Page 1963Call Control Profile Configuration Mode gtp send ▀ gtp send Configures which information elements (IE) the SGSN sends in GTP...
  • Page 1964 Call Control Profile Configuration Mode ▀ gtp send ms-timezone Instructs the SGSN to include this IE in GTP messages...
  • Page 1965Call Control Profile Configuration Mode gtp send ▀ use-ue-plmn This keyword selects Selected PLMN for supporting UE and Common PLMN...
  • Page 1966 Call Control Profile Configuration Mode ▀ gtpp gtpp Enables secondary GTPP accounting for an S-GW call control profile. By...
  • Page 1967Call Control Profile Configuration Mode gtpu fast-path ▀ gtpu fast-path Enables or disables the network processing unit (NPU) Fast Path...
  • Page 1968 Call Control Profile Configuration Mode ▀ gw-selection gw-selection Configures the parameters controlling the gateway selection process. Product MME SGSN...
  • Page 1969Call Control Profile Configuration Mode gw-selection ▀ Usage Use this command to define the criteria for gateway selection. Selection of...
  • Page 1970 Call Control Profile Configuration Mode ▀ ignore-ul-data-status ignore-ul-data-status This command is used to enable or disable processing of Uplink...
  • Page 1971Call Control Profile Configuration Mode idle-mode-signaling-reduction ▀ idle-mode-signaling-reduction Enables or disables the Idle-Mode-Signaling-Reduction (ISR) feature on the S4-SGSN. Product SGSN...
  • Page 1972 Call Control Profile Configuration Mode ▀ integrity-algorithm-lte integrity-algorithm-lte Specifies the order of preference for using an Integrity Algorithm. Product...
  • Page 1973Call Control Profile Configuration Mode integrity-algorithm-umts ▀ integrity-algorithm-umts Configures the order of preference for the Integrity Algorithm used for 3G....
  • Page 1974 Call Control Profile Configuration Mode ▀ lcs-mo lcs-mo This command enables/disables mobile-originating Location Requests by access-type when Location Services...
  • Page 1975Call Control Profile Configuration Mode lcs-mt ▀ lcs-mt This command enables/disables mobile-terminating Location Requests by access-type when Location Services functionality...
  • Page 1976 Call Control Profile Configuration Mode ▀ lcs-ni lcs-ni This command enables/disables network-initiated Location Requests by access-type when Location Services...
  • Page 1977Call Control Profile Configuration Mode local-cause-code-mapping apn-mismatch ▀ local-cause-code-mapping apn-mismatch Configures the reject cause code to send to a UE...
  • Page 1978 Call Control Profile Configuration Mode ▀ local-cause-code-mapping apn-mismatch Related Commands: If a condition is specified in both the call-control-profile...
  • Page 1979Call Control Profile Configuration Mode local-cause-code-mapping apn-not-subscribed ▀ local-cause-code-mapping apn-not-subscribed Gives the operator the option to specify the local cause-code...
  • Page 1980 Call Control Profile Configuration Mode ▀ local-cause-code-mapping auth-failure local-cause-code-mapping auth-failure Configures the reject cause code to send to a...
  • Page 1981Call Control Profile Configuration Mode local-cause-code-mapping auth-failure ▀  The UE responds to any identity request with a different type...
  • Page 1982 Call Control Profile Configuration Mode ▀ local-cause-code-mapping congestion local-cause-code-mapping congestion Configures the reject cause code to send to a...
  • Page 1983Call Control Profile Configuration Mode local-cause-code-mapping congestion ▀ esm-cause-code { congestion | insufficient-resources | service-option- temporarily-out-of-order } Specifies the EPS...
  • Page 1984 Call Control Profile Configuration Mode ▀ local-cause-code-mapping ctxt-xfer-fail-mme local-cause-code-mapping ctxt-xfer-fail-mme Configures the reject cause code to send to a...
  • Page 1985Call Control Profile Configuration Mode local-cause-code-mapping ctxt-xfer-fail-mme ▀ Related Commands: If a cause code mapping is specified in both the...
  • Page 1986 Call Control Profile Configuration Mode ▀ local-cause-code-mapping ctxt-xfer-fail-sgsn local-cause-code-mapping ctxt-xfer-fail-sgsn Configures the reject cause code to send to a...
  • Page 1987Call Control Profile Configuration Mode local-cause-code-mapping ctxt-xfer-fail-sgsn ▀ Related Commands: If a cause code mapping is specified in both the...
  • Page 1988 Call Control Profile Configuration Mode ▀ local-cause-code-mapping gw-unreachable local-cause-code-mapping gw-unreachable Configures the reject cause code to send to a...
  • Page 1989Call Control Profile Configuration Mode local-cause-code-mapping gw-unreachable ▀ Usage Use this command to configure the cause code returned to a...
  • Page 1990 Call Control Profile Configuration Mode ▀ local-cause-code-mapping hss-unavailable local-cause-code-mapping hss-unavailable Configures the reject cause code to send to a...
  • Page 1991Call Control Profile Configuration Mode local-cause-code-mapping hss-unavailable ▀ The cause code configured for this condition will be signaled in TAU...
  • Page 1992 Call Control Profile Configuration Mode ▀ local-cause-code-mapping map-cause-code local-cause-code-mapping map-cause-code Configures the operator-preferred GMM reject cause code to send...
  • Page 1993Call Control Profile Configuration Mode local-cause-code-mapping map-cause-code ▀ gmm-cause-code gmm-cause Specifies the GPRS mobility management (GMM) cause code to return...
  • Page 1994 Call Control Profile Configuration Mode ▀ local-cause-code-mapping no-active-bearers local-cause-code-mapping no-active-bearers Configures the reject cause code to send to a...
  • Page 1995Call Control Profile Configuration Mode local-cause-code-mapping no-active-bearers ▀ Usage Use this command to configure the cause code returned to a...
  • Page 1996 Call Control Profile Configuration Mode ▀ local-cause-code-mapping path-failure local-cause-code-mapping path-failure Configures SM cause codes for SGSN to send in...
  • Page 1997Call Control Profile Configuration Mode local-cause-code-mapping peer-node-unknown ▀ local-cause-code-mapping peer-node-unknown Configures the reject cause code to send to a UE...
  • Page 1998 Call Control Profile Configuration Mode ▀ local-cause-code-mapping peer-node-unknown or based on local configuration. This condition occurs when all mechanisms...
  • Page 1999Call Control Profile Configuration Mode local-cause-code-mapping pgw-selection-failure ▀ local-cause-code-mapping pgw-selection-failure Configures the reject cause code to send to a UE...
  • Page 2000 Call Control Profile Configuration Mode ▀ local-cause-code-mapping pgw-selection-failure Related Commands: If a cause code mapping is specified in both...
  • Page 2001Call Control Profile Configuration Mode local-cause-code-mapping restricted-zone-code ▀ local-cause-code-mapping restricted-zone-code Configures the reject cause code to send to a UE...
  • Page 2002 Call Control Profile Configuration Mode ▀ local-cause-code-mapping restricted-zone-code command in the mme-service configuration mode. This command is described in...
  • Page 2003Call Control Profile Configuration Mode local-cause-code-mapping sgw-selection-failure ▀ local-cause-code-mapping sgw-selection-failure Configures the reject cause code to send to a UE...
  • Page 2004 Call Control Profile Configuration Mode ▀ local-cause-code-mapping sgw-selection-failure Related Commands: If a cause code mapping is specified in both...
  • Page 2005Call Control Profile Configuration Mode local-cause-code-mapping vlr-down ▀ local-cause-code-mapping vlr-down Configures the cause code to send in a ATTACH ACCEPT...
  • Page 2006 Call Control Profile Configuration Mode ▀ local-cause-code-mapping vlr-down command in the mme-service configuration mode. This command is described in...
  • Page 2007Call Control Profile Configuration Mode local-cause-code-mapping vlr-unreachable ▀ local-cause-code-mapping vlr-unreachable Configures the cause code to send in a ATTACH ACCEPT...
  • Page 2008 Call Control Profile Configuration Mode ▀ local-cause-code-mapping vlr-unreachable command in the mme-service configuration mode. This command is described in...
  • Page 2009Call Control Profile Configuration Mode location-area-list ▀ location-area-list Defines the location area list to allow or restrict services in the...
  • Page 2010 Call Control Profile Configuration Mode ▀ location-area-list The next command corrects an area code mistake (327 not 32) made...
  • Page 2011Call Control Profile Configuration Mode location-reporting ▀ location-reporting Enable 3G/2G Location Change Reporting feature on the SGSN. Product SGSN Privilege...
  • Page 2012 Call Control Profile Configuration Mode ▀ lte-zone-code lte-zone-code Configures the enforcement of allowed or restricted zone code lists and...
  • Page 2013Call Control Profile Configuration Mode lte-zone-code ▀ Usage Use this command to create zone code lists that allow or restrict...
  • Page 2014 Call Control Profile Configuration Mode ▀ map map Configures the optional extensions to Mobile Application Part (MAP) messages. Product...
  • Page 2015Call Control Profile Configuration Mode map ▀ map message update-gprs-location private-extension access-type Command Line Interface Reference, StarOS Release 17 ▄...
  • Page 2016 Call Control Profile Configuration Mode ▀ map-service map-service Identifies a Mobile Application Part (MAP) service and the context which...
  • Page 2017Call Control Profile Configuration Mode max-bearers-per-subscriber ▀ max-bearers-per-subscriber Defines the maximum number of bearers allowed per subscriber. Product MME Privilege...
  • Page 2018 Call Control Profile Configuration Mode ▀ max-pdns-per-subscriber max-pdns-per-subscriber Defines the maximum number of PDNs allowed per subscriber. Product MME...
  • Page 2019Call Control Profile Configuration Mode min-unused-auth-vectors ▀ min-unused-auth-vectors Configures a specific minimum number of unused vectors to be maintained by...
  • Page 2020 Call Control Profile Configuration Mode ▀ mobility-protocol mobility-protocol This command allows you to configure the default mobility protocol type...
  • Page 2021Call Control Profile Configuration Mode network-feature-support-ie ▀ network-feature-support-ie Configures support for the IMS Voice over Packet-Switched indication and Homogenous Support...
  • Page 2022 Call Control Profile Configuration Mode ▀ network-initiated-pdp-activation network-initiated-pdp-activation Configures the call control profile to perform two functions: (1) to...
  • Page 2023Call Control Profile Configuration Mode network-initiated-pdp-activation ▀ Important: The secondary keyword is visible and can be selected. However, NRSPCA functionality...
  • Page 2024 Call Control Profile Configuration Mode ▀ network-initiated-pdp-activation  213 - Relocation failure  214 - Unknown mandatory extension header...
  • Page 2025Call Control Profile Configuration Mode network-initiated-pdp-activation ▀ network-initiated-pdp-activation restrict primary access-type umts location-area-list instance 2 Command Line Interface Reference, StarOS...
  • Page 2026 Call Control Profile Configuration Mode ▀ override-arp-with-ggsn-arp override-arp-with-ggsn-arp Enables or disables the ability of the SGSN to override an...
  • Page 2027Call Control Profile Configuration Mode pdp-activate access-type ▀ pdp-activate access-type Configures the PDP context activation option based the type of...
  • Page 2028 Call Control Profile Configuration Mode ▀ pdp-activate access-type Example The following command configures the system to create the PDP...
  • Page 2029Call Control Profile Configuration Mode pdp-activate allow ▀ pdp-activate allow Configures the system to allow the PDP context activation based...
  • Page 2030 Call Control Profile Configuration Mode ▀ pdp-activate restrict pdp-activate restrict Configures the system to restrict the PDP context activation...
  • Page 2031Call Control Profile Configuration Mode pdp-activate restrict ▀ secondary-activation Restricts the SGSN, based on the access-type, so that secondary PDP...
  • Page 2032 Call Control Profile Configuration Mode ▀ pdn-type-override pdn-type-override Configures the MME or the SGSN to override the requested packet...
  • Page 2033Call Control Profile Configuration Mode pdn-type-override ▀ Example The following command configures the system to override the requested PDN type...
  • Page 2034 Call Control Profile Configuration Mode ▀ peer-mme peer-mme Configures a peer MME address. S4-SGSN operators can use this command...
  • Page 2035Call Control Profile Configuration Mode peer-mme ▀ prefer { fallback-for-dns | local } Indicates whether to use a DNS query...
  • Page 2036 Call Control Profile Configuration Mode ▀ peer-msc peer-msc Enables/disables weight-based selection of a peer MSC during MSC lookup. By...
  • Page 2037Call Control Profile Configuration Mode peer-nri-length ▀ peer-nri-length Enables the SGSN to use NRI-FQDN-based DNS resolution for non-local RAIs when...
  • Page 2038 Call Control Profile Configuration Mode ▀ peer-nri-length This functionality is applicable in situations for either inter- or intra-PLMN when...
  • Page 2039Call Control Profile Configuration Mode plmn-protocol ▀ plmn-protocol Configures the protocol supported by the PLMN (Public Land Mobile Network). Product...
  • Page 2040 Call Control Profile Configuration Mode ▀ prefer subscription-interface prefer subscription-interface Selects the specified subscription interface (Gr or S6d) if...
  • Page 2041Call Control Profile Configuration Mode prefer subscription-interface ▀ prefer subscription-interface hss Command Line Interface Reference, StarOS Release 17 ▄ 2041...
  • Page 2042 Call Control Profile Configuration Mode ▀ ptmsi-reallocate ptmsi-reallocate Defines P-TMSI reallocation for Attach Requests, RAU Request, and Service Requests....
  • Page 2043Call Control Profile Configuration Mode ptmsi-reallocate ▀ access-type type One of the following must be selected to reallocate on the...
  • Page 2044 Call Control Profile Configuration Mode ▀ ptmsi-reallocate ptmsi-reallocate attach access-type gprs The following command configures the SGSN to disable...
  • Page 2045Call Control Profile Configuration Mode ptmsi-signature-reallocate ▀ ptmsi-signature-reallocate Enables P-TMSI signature reallocation during Attach/RAU procedures. Product SGSN Privilege Security Administrator,...
  • Page 2046 Call Control Profile Configuration Mode ▀ ptmsi-signature-reallocate frequency frequency Defines 1-in-N selective reallocation. If the frequency is set for...
  • Page 2047Call Control Profile Configuration Mode qos ▀ qos Configures the quality of service (QoS) parameters to be applied. Product MME...
  • Page 2048 Call Control Profile Configuration Mode ▀ qos pre-emption Defines the pre-emption/vulnerability criteria for PDP Contexts imported from SGSN on...
  • Page 2049Call Control Profile Configuration Mode qos ▀  no-suitable-cell-in-tracking-area  plmn-not-allowed  roaming-not-allowed-in-this-tracking-area  tracking-area-not-allowed prefer-as-cap { both-hss-and-local minimum |...
  • Page 2050 Call Control Profile Configuration Mode ▀ rau-inter rau-inter Defines acceptable parameters for inter-SGSN routing area updates. Product SGSN Privilege...
  • Page 2051Call Control Profile Configuration Mode rau-inter ▀ allow access-type Including this keyword with one of the following options, configures the...
  • Page 2052 Call Control Profile Configuration Mode ▀ rau-inter location-area-list instance instance list_id must be an integer between 1 and 5....
  • Page 2053Call Control Profile Configuration Mode rau-inter ▀ user-device-release { before-r99 | r99-or-later } failure-code code Default: Disabled Enables the SGSN...
  • Page 2054 Call Control Profile Configuration Mode ▀ rau-inter-plmn rau-inter-plmn Enables or disables restriction of all Routing Area Updates (RAUs) occurring...
  • Page 2055Call Control Profile Configuration Mode rau-inter-plmn ▀ restrict access-type Including this keyword-set with one of the following options, configures the...
  • Page 2056 Call Control Profile Configuration Mode ▀ rau-inter-plmn  97 - Message type non-existent or not implemented  98 -...
  • Page 2057Call Control Profile Configuration Mode rau-intra ▀ rau-intra Defines an acceptable procedure for intra-SGSN Routing Area Updates (RAUs). Product SGSN...
  • Page 2058 Call Control Profile Configuration Mode ▀ rau-intra restrict access-type Including this keyword-set with one of the following options, configures...
  • Page 2059Call Control Profile Configuration Mode rau-intra ▀  97 - Message type non-existent or not implemented  98 - Message...
  • Page 2060 Call Control Profile Configuration Mode ▀ re-authenticate re-authenticate Enables or disables the re-authentication feature. This command is available in...
  • Page 2061Call Control Profile Configuration Mode regional-subscription-restriction ▀ regional-subscription-restriction Allows the operator to define the cause code for subscriber rejection when...
  • Page 2062 Call Control Profile Configuration Mode ▀ regional-subscription-restriction  20 - MAC failure  21 - Synch failure  22...
  • Page 2063Call Control Profile Configuration Mode release-access-bearer ▀ release-access-bearer Enables sending of Release Access Bearer and configures the S4-SGSN to send...
  • Page 2064 Call Control Profile Configuration Mode ▀ release-access-bearer or/and remove release-access-bearer on-ready-to-standby will display in the output generated by the...
  • Page 2065Call Control Profile Configuration Mode reuse-authentication-triplets ▀ reuse-authentication-triplets Creates a configuration entry to enable or disable the reuse of authentication...
  • Page 2066 Call Control Profile Configuration Mode ▀ rfsp-override rfsp-override Configures RAT frequency selection priority override parameters for this call control...
  • Page 2067Call Control Profile Configuration Mode rfsp-override ▀ Example The following command resets the specified RFSP Index value (1) to its...
  • Page 2068 Call Control Profile Configuration Mode ▀ rfsp-override ue-settings rfsp-override ue-settings Configures the override of the RAT Frequency Selection Priority...
  • Page 2069Call Control Profile Configuration Mode rfsp-override ue-settings ▀ new-val value Assign a new RFSP Index value. value: Enter an integer...
  • Page 2070 Call Control Profile Configuration Mode ▀ s1-reset s1-reset Configures the behavior of user equipment (UE) on S1-reset. Product MME...
  • Page 2071Call Control Profile Configuration Mode sctp-down ▀ sctp-down Configures the behavior towards UE (user equipment) when Stream Control Transmission Protocol...
  • Page 2072 Call Control Profile Configuration Mode ▀ sgs-cause-code-mapping sgs-cause-code-mapping Configures the EMM reject cause code to send to a UE...
  • Page 2073Call Control Profile Configuration Mode sgs-cause-code-mapping ▀  service-out-of-order - Default mapped EMM cause code: #16 MSC temporarily unreachable. emm-cause-code...
  • Page 2074 Call Control Profile Configuration Mode ▀ sgsn-address sgsn-address Defines the IP addresses for peer SGSNs in a static SGSN...
  • Page 2075Call Control Profile Configuration Mode sgsn-address ▀ Important: Typically, use of this keyword is optional. However, it must be included...
  • Page 2076 Call Control Profile Configuration Mode ▀ sgsn-address  With the peer-SGSN address configured using this sgsn-address command, the peer-SGSN-RAI’s...
  • Page 2077Call Control Profile Configuration Mode sgsn-core-nw-interface ▀ sgsn-core-nw-interface This command enables operators to select the Gn interface or the S4...
  • Page 2078 Call Control Profile Configuration Mode ▀ sgsn-core-nw-interface Example sgsn-core-nw-interface gn ▄ Command Line Interface Reference, StarOS Release 17 2078...
  • Page 2079Call Control Profile Configuration Mode sgsn-number ▀ sgsn-number Defines the SGSN’s E.164 number to be used for interactions via the...
  • Page 2080 Call Control Profile Configuration Mode ▀ sgtp-service sgtp-service Identifies the SGTP service configuration to be used according to this...
  • Page 2081Call Control Profile Configuration Mode sms-mo ▀ sms-mo Configures how mobile-originated (MO) short message service (SMS) messages are handled. Product...
  • Page 2082 Call Control Profile Configuration Mode ▀ sms-mo sms-mo access-type gprs all-location-areas failure-code 100 ▄ Command Line Interface Reference, StarOS...
  • Page 2083Call Control Profile Configuration Mode sms-mt ▀ sms-mt This command configures how mobile-terminated (MT) short message service (SMS) messages are...
  • Page 2084 Call Control Profile Configuration Mode ▀ sms-mt sms-mt access-type gprs all-location-areas failure-code 100 ▄ Command Line Interface Reference, StarOS...
  • Page 2085Call Control Profile Configuration Mode srns-inter ▀ srns-inter Defines handling parameters for Inter-SRNS (Serving Radio Network Subsystem) relocation. Product SGSN...
  • Page 2086 Call Control Profile Configuration Mode ▀ srns-inter Usage This command defines the operational parameters for inter-SRNS relocation. Example The...
  • Page 2087Call Control Profile Configuration Mode srns-intra ▀ srns-intra Defines handling parameters for intra-SRNS (Serving Radio Network Subsystem) relocation. Product SGSN...
  • Page 2088 Call Control Profile Configuration Mode ▀ srns-intra Usage This command defines the operational parameters for intra-SRNS relocation. Example The...
  • Page 2089Call Control Profile Configuration Mode srvcc exclude-stnsr-nanpi ▀ srvcc exclude-stnsr-nanpi Configures the MME to not include the Nature of Address...
  • Page 2090 Call Control Profile Configuration Mode ▀ subscriber multi-device subscriber multi-device Enable or disable the operator policy from allowing multiple...
  • Page 2091Call Control Profile Configuration Mode subscriber-control-inactivity ▀ subscriber-control-inactivity Configures \the subscriber-control inactivity timer. The system detects inactivity when no PDP...
  • Page 2092 Call Control Profile Configuration Mode ▀ subscriber-control-inactivity  reattach-time-period period[ action ] - Specify the number of seconds the...
  • Page 2093Call Control Profile Configuration Mode super-charger ▀ super-charger Enables or disables the SGSN to work with a super-charged network. Product...
  • Page 2094 Call Control Profile Configuration Mode ▀ tau tau Configure parameters for the tracking area update (TAU) procedure. Product MME...
  • Page 2095Call Control Profile Configuration Mode tau ▀ inter-rat security-ctxt { allow-mapped | native } Configure inter-RAT parameters for TAU. This...
  • Page 2096 Call Control Profile Configuration Mode ▀ tcp-maximum-segment-size tcp-maximum-segment-size This command enables the operator to define a maximum segment size...
  • Page 2097Call Control Profile Configuration Mode timeout ▀ timeout Configure the duration after which the cached MAC to IMSI mapping entry...
  • Page 2098 Call Control Profile Configuration Mode ▀ treat-as-hplmn treat-as-hplmn Enables or disables the SGSN to treat an IMSI series as...
  • Page 2099Call Control Profile Configuration Mode vplmn-address ▀ vplmn-address Enables/disables the SGSN to override the VPLMN address-allowed flag. Product SGSN Privilege...
  • Page 2100 Call Control Profile Configuration Mode ▀ vplmn-address vplmn-address not-allowed The following command instructs the SGSN not to override standard...
  • Page 2101Call Control Profile Configuration Mode zone-code ▀ zone-code Configures a zone code listing of one or more location area code...
  • Page 2102 Call Control Profile Configuration Mode ▀ zone-code the addressed SGSN. It contains the complete list (up to 10 zone...
  • Page 2103: Chapter 40 Call-Home Configuration ModeChapter 40 Call-Home Configuration Mode The Call-Home Configuration Mode sets parameters for the Smart Call Home feature. Smart Call Home...
  • Page 2104 Call-Home Configuration Mode ▀ activate activate Activates the Cisco Smart Call Home service. Product All Privilege Security Administrator, Administrator...
  • Page 2105Call-Home Configuration Mode alert-group ▀ alert-group Enables or disables the Smart Call Home alert-group. Product All Privilege Security Administrator, Administrator...
  • Page 2106 Call-Home Configuration Mode ▀ alert-group alert-group syslog Enables an alert group related to syslog. This includes events generated by...
  • Page 2107Call-Home Configuration Mode contact-email-addr ▀ contact-email-addr Sets the e-mail address of the person identified as the prime contact for this...
  • Page 2108 Call-Home Configuration Mode ▀ contract-id contract-id Configures the system’s contract-identifier for Cisco AutoNotify. Product All Privilege Security Administrator, Administrator...
  • Page 2109Call-Home Configuration Mode customer-id ▀ customer-id Configures the system’s customer-identifier for Cisco AutoNotify. Product All Privilege Security Administrator, Administrator Mode...
  • Page 2110 Call-Home Configuration Mode ▀ end end Exits the current configuration mode and returns to the Exec mode. Product All...
  • Page 2111Call-Home Configuration Mode exit ▀ exit Exits the current mode and returns to the parent configuration mode. Product All Privilege...
  • Page 2112 Call-Home Configuration Mode ▀ mail-server mail-server Configures the Smart Call Home mail-server. Product All Privilege Security Administrator, Administrator Mode...
  • Page 2113Call-Home Configuration Mode phone-number ▀ phone-number Enables or disables the phone-number for the Smart Call Home contact person. Product All...
  • Page 2114 Call-Home Configuration Mode ▀ profile profile Creates the Smart Call Home profile. Product All Privilege Security Administrator, Administrator Mode...
  • Page 2115Call-Home Configuration Mode rate-limit ▀ rate-limit Enables or disables the message rate-limit for Smart Call Home features. Product All Privilege...
  • Page 2116 Call-Home Configuration Mode ▀ sender sender Specifies the Smart Call Home e-mail settings for the “from” address and “reply-to”...
  • Page 2117Call-Home Configuration Mode site-id ▀ site-id Specifies the Smart Call Home site identifier for this system. Product All Privilege Security...
  • Page 2118 Call-Home Configuration Mode ▀ street-address street-address Specifies the Smart Call Home street address for the system. Product All Privilege...
  • Page 2119: Chapter 41 Call-Home Profile Configuration ModeChapter 41 Call-Home Profile Configuration Mode The Call-Home Profile Configuration Mode is used to create groups of users that will...
  • Page 2120 Call-Home Profile Configuration Mode ▀ active active Activates this Smart Call Home profile. Product All Privilege Security Administrator, Administrator...
  • Page 2121Call-Home Profile Configuration Mode destination ▀ destination Configures the message destinations for this Smart Call Home profile. Product All Privilege...
  • Page 2122 Call-Home Profile Configuration Mode ▀ destination preferred-msg-format [ long-text | short-text | xml] Specifies the message format for the...
  • Page 2123Call-Home Profile Configuration Mode end ▀ end Exits the current configuration mode and returns to the Exec mode. Product All...
  • Page 2124 Call-Home Profile Configuration Mode ▀ exit exit Exits the current mode and returns to the parent configuration mode. Product...
  • Page 2125Call-Home Profile Configuration Mode subscribe-to-alert-group ▀ subscribe-to-alert-group Subscribes this profile to the alert group for the call-home profile. Product All...
  • Page 2126 Call-Home Profile Configuration Mode ▀ subscribe-to-alert-group  warning – Level 7: warning event, matches platform logging level warning. ...
  • Page 2127Call-Home Profile Configuration Mode subscribe-to-alert-group ▀  notification – Level 8: notification event, matches platform logging level unusual.  normal...
  • Page 2128
  • Page 2129: Chapter 42 CAMEL Service Configuration Mode CommandsChapter 42 CAMEL Service Configuration Mode Commands The CAMEL Service configuration mode provides a set of commands to define the...
  • Page 2130 CAMEL Service Configuration Mode Commands ▀ associate-sccp-network associate-sccp-network Configure an association between this CAMEL service and a specified SCCP...
  • Page 2131CAMEL Service Configuration Mode Commands end ▀ end Exits the current configuration mode and returns to the Exec mode. Product...
  • Page 2132 CAMEL Service Configuration Mode Commands ▀ exit exit Exits the current mode and returns to the parent configuration mode....
  • Page 2133CAMEL Service Configuration Mode Commands tcap destination-address ▀ tcap destination-address Configure the gsmSCF address to be used to open TC...
  • Page 2134 CAMEL Service Configuration Mode Commands ▀ timeout timeout Configure a range of timers needed to support CAMEL service. Product...
  • Page 2135CAMEL Service Configuration Mode Commands timeout ▀ gprs-tssf-timer seconds Configure the GPRS TSSF timer to set the length of time...
  • Page 2136
  • Page 2137: Chapter 43 Card Configuration Mode CommandsChapter 43 Card Configuration Mode Commands Use the Card configuration mode to create and manage the physical cards in the...
  • Page 2138 Card Configuration Mode Commands ▀ aps aps Configures the parameters for the automatic protection switching (APS) feature for SONET...
  • Page 2139Card Configuration Mode Commands aps ▀ non-revertive Prevents the network from automatically reverting to the original working line/port when the...
  • Page 2140 Card Configuration Mode Commands ▀ end end Exits the current configuration mode and returns to the Exec mode. Product...
  • Page 2141Card Configuration Mode Commands exit ▀ exit Exits the current mode and returns to the parent configuration mode. Product All...
  • Page 2142 Card Configuration Mode Commands ▀ framing framing Configures the type of framing to be used for the signaling generated...
  • Page 2143Card Configuration Mode Commands framing ▀ sonet [ ds1 | e1 ] Configures the system to use SONET signal framing...
  • Page 2144 Card Configuration Mode Commands ▀ header-type header-type Defines the size of the header frame for Frame Relay transmissions over...
  • Page 2145Card Configuration Mode Commands initial-e1-framing ▀ initial-e1-framing Configures the type of framing mode that will initially be available at the...
  • Page 2146 Card Configuration Mode Commands ▀ link-aggregation link-aggregation Configures system priority and toggle link settings for Link Aggregation. These parameters...
  • Page 2147Card Configuration Mode Commands link-aggregation ▀ Usage The system MAC address (6 bytes) and system priority (2 bytes) combine to...
  • Page 2148 Card Configuration Mode Commands ▀ mode mode Sets the application processor card’s current administrative state to active or standby....
  • Page 2149Card Configuration Mode Commands mode ▀ Usage Set the desired mode of mated cards. The card targeted for maintenance is...
  • Page 2150 Card Configuration Mode Commands ▀ redundancy redundancy Configures the type of redundancy for a line card or SPIO. (ASR...
  • Page 2151Card Configuration Mode Commands redundancy ▀ card-mode Specifies no port redundancy is used. This is used mostly for legacy products....
  • Page 2152 Card Configuration Mode Commands ▀ redundant with redundant with Enables side-by-side (SBS) redundancy for XGLCs. (ASR 5000 only) Product...
  • Page 2153Card Configuration Mode Commands service-type ▀ service-type Configures the type of service that the CLC or CLC2 line card will...
  • Page 2154 Card Configuration Mode Commands ▀ service-type unspecified This is the default mode for a CLC or CLC2. Important: You...
  • Page 2155Card Configuration Mode Commands shutdown ▀ shutdown Configures a card for active service or terminates all processes on the card....
  • Page 2156
  • Page 2157: Chapter 44 CBS Service Configuration Mode CommandsChapter 44 CBS Service Configuration Mode Commands The Cell Broadcasting Service (CBS) Configuration Mode is used to create and manage...
  • Page 2158 CBS Service Configuration Mode Commands ▀ bind bind This command binds the CBS service to the IP address of...
  • Page 2159CBS Service Configuration Mode Commands cbc-address-validation ▀ cbc-address-validation This command is used for validation of Cell Broadcasting Centre IP address....
  • Page 2160 CBS Service Configuration Mode Commands ▀ cbc-server cbc-server This command configures the CBC server for cell broadcasting service. Product...
  • Page 2161CBS Service Configuration Mode Commands end ▀ end Exits the current configuration mode and returns to the Exec mode. Product...
  • Page 2162 CBS Service Configuration Mode Commands ▀ exit exit Exits the current mode and returns to the parent configuration mode....
  • Page 2163CBS Service Configuration Mode Commands sabp timer ▀ sabp timer Configures the Service Area Broadcast Protocol (SABP) procedure timer value....
  • Page 2164 CBS Service Configuration Mode Commands ▀ sabp-class2-aggregation sabp-class2-aggregation This command configures the SABP class-2 aggregation timeout. Product HNB-GW Privilege...
  • Page 2165CBS Service Configuration Mode Commands tcp-keepalive ▀ tcp-keepalive This comand is TCP Keepalive timer. It is used to check liveness...
  • Page 2166 CBS Service Configuration Mode Commands ▀ tcp-mode tcp-mode This comand configures the mode of TCP connection. Product HNB-GW Privilege...
  • Page 2167: Chapter 45 Channelized Port Configuration Mode CommandsChapter 45 Channelized Port Configuration Mode Commands The channelized port configuration mode provides the commands to create, configure, bind, and...
  • Page 2168 Channelized Port Configuration Mode Commands ▀ alarm-disable alarm-disable Entering this command disables the alarm detection for designated sets of...
  • Page 2169Channelized Port Configuration Mode Commands alarm-soak-timer ▀ alarm-soak-timer This command sets the timer for the duration that a detected alarm...
  • Page 2170 Channelized Port Configuration Mode Commands ▀ clock-source clock-source This command sets the source of the port’s transmit clock. Important:...
  • Page 2171Channelized Port Configuration Mode Commands description ▀ description Defines descriptive text that provides useful information about the port. Product SGSN...
  • Page 2172 Channelized Port Configuration Mode Commands ▀ dlci dlci Identifies a data link connection identifier (DLCI), a frame relay logical...
  • Page 2173Channelized Port Configuration Mode Commands dlci ▀ timeslot slot# Identifies one of the timeslots within a timeslot group configured with...
  • Page 2174 Channelized Port Configuration Mode Commands ▀ end end Exits the Channelized Port configuration mode and returns to the Exec...
  • Page 2175Channelized Port Configuration Mode Commands exit ▀ exit Exits the current mode and returns to the parent configuration mode. Product...
  • Page 2176 Channelized Port Configuration Mode Commands ▀ frame-relay frame-relay Configures the parameters for the Frame Relay connections for E1, DS1...
  • Page 2177Channelized Port Configuration Mode Commands frame-relay ▀ frame-relay lmi_type lmi_type Default: none. Line management options include:  ansi - ANSI...
  • Page 2178 Channelized Port Configuration Mode Commands ▀ hopath-sdsf hopath-sdsf Configures the high-order path for degrade/signal failure (SDSF) bit error rate...
  • Page 2179Channelized Port Configuration Mode Commands line-timing ▀ line-timing This command enables the SPIO to recover transmit timing source via the...
  • Page 2180 Channelized Port Configuration Mode Commands ▀ loopback loopback Configures the type of loopback mode used for diagnostic testing. Product...
  • Page 2181Channelized Port Configuration Mode Commands lopath-sdsf ▀ lopath-sdsf Configures the low-order path for signal degrade/signal failure (SDSF) bit error rate...
  • Page 2182 Channelized Port Configuration Mode Commands ▀ path path This command configures the parameters that define the routing path for...
  • Page 2183Channelized Port Configuration Mode Commands path ▀ frame-mapping Frame mapping sets the channelization according to the national standards that correlate...
  • Page 2184 Channelized Port Configuration Mode Commands ▀ path  option for either E1 or DS1:  unframed mapping-mode  bit-sync...
  • Page 2185Channelized Port Configuration Mode Commands path ▀  n393 value - Monitored events count value. Default is 2. value must...
  • Page 2186 Channelized Port Configuration Mode Commands ▀ preferred slot preferred slot Identifies which card in a chassis should assume revertive...
  • Page 2187Channelized Port Configuration Mode Commands pwe3-cesopsn ▀ pwe3-cesopsn This command has been deprecated and replaced by the mtp2 command. Command...
  • Page 2188 Channelized Port Configuration Mode Commands ▀ shutdown shutdown Terminates all processes supporting the port or blocks the shutting down...
  • Page 2189Channelized Port Configuration Mode Commands snmp trap link-status ▀ snmp trap link-status Enables/disables the generation and sending of an SNMP...
  • Page 2190 Channelized Port Configuration Mode Commands ▀ threshold high-activity threshold high-activity Configures the port’s high and low activity thresholds. Product...
  • Page 2191Channelized Port Configuration Mode Commands threshold monitoring ▀ threshold monitoring Enables thresholding for port-level values. Product SGSN Privilege Security Administrator,...
  • Page 2192 Channelized Port Configuration Mode Commands ▀ threshold monitoring Global Configuration Mode Commands chapter of this reference for information on...
  • Page 2193Channelized Port Configuration Mode Commands threshold rx-utilization ▀ threshold rx-utilization Configures thresholds for receive-port utilization. Product SGSN Privilege Security Administrator,...
  • Page 2194 Channelized Port Configuration Mode Commands ▀ threshold rx-utilization Refer to the threshold poll command in the Global Configuration Mode...
  • Page 2195Channelized Port Configuration Mode Commands threshold tx-utilization ▀ threshold tx-utilization Configures thresholds for transmit port utilization. Product SGSN Privilege Security...
  • Page 2196 Channelized Port Configuration Mode Commands ▀ threshold tx-utilization Refer to the threshold poll command in the Global Configuration Mode...
  • Page 2197Channelized Port Configuration Mode Commands toh-sdsf ▀ toh-sdsf Enable/disable line SDSF BER thresholds and configure the line transport overhead (TOH)...
  • Page 2198 Channelized Port Configuration Mode Commands ▀ vc-mapping vc-mapping This command has been deprecated. Go to the frame-mapping keyword in...
  • Page 2199: Chapter 46 Cipher Suite Configuration Mode CommandsChapter 46 Cipher Suite Configuration Mode Commands The Cipher Suite Configuration Mode is used to configure the building blocks for...
  • Page 2200 Cipher Suite Configuration Mode Commands ▀ encryption encryption Specifies the encryption algorithm for the SSL cipher suite. Product SCM...
  • Page 2201Cipher Suite Configuration Mode Commands end ▀ end Exits the current configuration mode and returns to the Exec mode. Product...
  • Page 2202 Cipher Suite Configuration Mode Commands ▀ exit exit Exits the current mode and returns to the parent configuration mode....
  • Page 2203Cipher Suite Configuration Mode Commands hmac ▀ hmac Specifies the HMAC (keyed-Hash Message Authentication Code) for the SSL cipher suite....
  • Page 2204 Cipher Suite Configuration Mode Commands ▀ key-exchange key-exchange Specifies the key exchange algorithm for the SSL cipher suite. Product...
  • Page 2205: Chapter 47 Class-Map Configuration Mode CommandsChapter 47 Class-Map Configuration Mode Commands Class-Map is used to configure a packet classifier for the flow-based Traffic Policing feature...
  • Page 2206 Class-Map Configuration Mode Commands ▀ end end Exits the current configuration mode and returns to the Exec mode. Product...
  • Page 2207Class-Map Configuration Mode Commands exit ▀ exit Exits the current mode and returns to the parent configuration mode. Product All...
  • Page 2208 Class-Map Configuration Mode Commands ▀ match any match any Allows all traffic types in this class map. Product PDSN...
  • Page 2209Class-Map Configuration Mode Commands match dst-ip-address ▀ match dst-ip-address Specifies a traffic classification rule based on the destination IP address...
  • Page 2210 Class-Map Configuration Mode Commands ▀ match dst-port-range match dst-port-range Specifies a traffic classification rule based on the range of...
  • Page 2211Class-Map Configuration Mode Commands match ip-tos ▀ match ip-tos Specifies a traffic classification rule based on the IP Type of...
  • Page 2212 Class-Map Configuration Mode Commands ▀ match ipsec-spi match ipsec-spi Specifies a traffic classification rule based on the IPSec Security...
  • Page 2213Class-Map Configuration Mode Commands match packet-size ▀ match packet-size Specifies a traffic classification rule based on the size of packet....
  • Page 2214 Class-Map Configuration Mode Commands ▀ match protocol match protocol Specifies a traffic classification rule based on the protocol used...
  • Page 2215Class-Map Configuration Mode Commands match protocol ▀ tcp Sets the match rule for a session flow using Transmission Control Protocol...
  • Page 2216 Class-Map Configuration Mode Commands ▀ match src-ip-address match src-ip-address Specifies a traffic classification rule based on the source IP...
  • Page 2217Class-Map Configuration Mode Commands match src-port-range ▀ match src-port-range Specifies a traffic classification rule based on the range of source...
  • Page 2218
  • Page 2219: Chapter 48 CGW Service Configuration Mode CommandsChapter 48 CGW Service Configuration Mode Commands Creates Convergence Gateway (CGW) service and enters CGW service configuration mode. Mode Exec...
  • Page 2220 CGW Service Configuration Mode Commands ▀ associate associate This command associates another service to this CGW service. Product SaMOG...
  • Page 2221CGW Service Configuration Mode Commands associate ▀ qci-qos-mapping qci-qos-mapping Configuration related QCI to QoS mapping. qci-qos-mapping is a string and...
  • Page 2222 CGW Service Configuration Mode Commands ▀ bind bind This command allows you to bind an IPv4 and/or IPv6 address...
  • Page 2223CGW Service Configuration Mode Commands enable-bra-failure-handling ▀ enable-bra-failure-handling This command enables the HAMGR to select the first session incase the...
  • Page 2224 CGW Service Configuration Mode Commands ▀ end end Exits the current configuration mode and returns to the Exec mode....
  • Page 2225CGW Service Configuration Mode Commands exit ▀ exit Exits the current mode and returns to the parent configuration mode. Product...
  • Page 2226 CGW Service Configuration Mode Commands ▀ gre sequence-numbers gre sequence-numbers This command allows you to enable or disable the...
  • Page 2227CGW Service Configuration Mode Commands reg-lifetime ▀ reg-lifetime Configures Mobile IPV6 session registration lifetime in seconds. Product SaMOG Privilege Security...
  • Page 2228 CGW Service Configuration Mode Commands ▀ revocation revocation Configures Binding Revocation support for specific CGW service. Product SaMOG Privilege...
  • Page 2229CGW Service Configuration Mode Commands revocation ▀ revocation retransmission-timeout 1000 Command Line Interface Reference, StarOS Release 17 ▄ 2229
  • Page 2230 CGW Service Configuration Mode Commands ▀ session-delete-delay session-delete-delay Configures CGW to retain the session on receiving a termination request...
  • Page 2231CGW Service Configuration Mode Commands timestamp-option-validation ▀ timestamp-option-validation Confiugures validation of Timestamp Option in Binding Update messages. By default Timestamp...
  • Page 2232 CGW Service Configuration Mode Commands ▀ timestamp-replay-protection timestamp-replay-protection This command designates timestamp replay protection scheme as per RFC 4285....
  • Page 2233: Chapter 49 Congestion Action Profile Configuration Mode CommandsChapter 49 Congestion Action Profile Configuration Mode Commands The Congestion Policy Configuration Mode is used to create and manage the...
  • Page 2234 Congestion Action Profile Configuration Mode Commands ▀ drop drop Specifies that incoming packets containing new session requests be dropped...
  • Page 2235Congestion Action Profile Configuration Mode Commands drop ▀ service-request Drops packets containing all service requests. This keyword option will be...
  • Page 2236 Congestion Action Profile Configuration Mode Commands ▀ end end Exits the current configuration mode and returns to the Exec...
  • Page 2237Congestion Action Profile Configuration Mode Commands exclude-emergency-events ▀ exclude-emergency-events Excludes emergency events when a congestion control threshold is reached. Emergency...
  • Page 2238 Congestion Action Profile Configuration Mode Commands ▀ exclude-voice-events exclude-voice-events Excludes voice calls when a congestion control threshold is reached....
  • Page 2239Congestion Action Profile Configuration Mode Commands exit ▀ exit Exits the current mode and returns to the parent configuration mode....
  • Page 2240 Congestion Action Profile Configuration Mode Commands ▀ none none Specifies that no congestion control action be taken on an...
  • Page 2241Congestion Action Profile Configuration Mode Commands none ▀ service-request No congestion control action is taken for service requests when a...
  • Page 2242 Congestion Action Profile Configuration Mode Commands ▀ reject reject Processes a specified request when a congestion control threshold has...
  • Page 2243Congestion Action Profile Configuration Mode Commands reject ▀ service-request Rejects all service requests. This keyword option will be available only...
  • Page 2244 Congestion Action Profile Configuration Mode Commands ▀ report-overload report-overload Enables the MME to report overload conditions to eNodeBs to...
  • Page 2245Congestion Action Profile Configuration Mode Commands report-overload ▀ enobeb-percentage percentage Configures the percentage of known eNodeBs that will receive the...
  • Page 2246
  • Page 2247: Chapter 50 Connected Apps Configuration Mode CommandsChapter 50 Connected Apps Configuration Mode Commands The Connected Apps (CA) Configuration Mode is used to define CA client session...
  • Page 2248 Connected Apps Configuration Mode Commands ▀ activate activate Initiates a ConnectedApps (CA) client session with the IOS-XR server on...
  • Page 2249Connected Apps Configuration Mode Commands ca-certificate-name ▀ ca-certificate-name Configures a ConnectedApps (CA) client session with the IOS-XR server using TLS...
  • Page 2250 Connected Apps Configuration Mode Commands ▀ end end Exits the current configuration mode and returns to the Exec mode....
  • Page 2251Connected Apps Configuration Mode Commands exit ▀ exit Exits the current mode and returns to the parent configuration mode. Product...
  • Page 2252 Connected Apps Configuration Mode Commands ▀ ha-chassis-mode ha-chassis-mode Sets the High Availability (HA) mode for wsg-service virtual machines on...
  • Page 2253Connected Apps Configuration Mode Commands ha-network-mode ▀ ha-network-mode Sets the network mode for High Availability (HA) network configuration between VSMs...
  • Page 2254 Connected Apps Configuration Mode Commands ▀ rri-mode rri-mode Configures Reverse Route Injection (RRI) mode. (VPC-VSM only) Product SecGW Privilege...
  • Page 2255Connected Apps Configuration Mode Commands sess-ip-address ▀ sess-ip-address Sets the IP address for a Connected Apps (CA) session. Product SecGW...
  • Page 2256 Connected Apps Configuration Mode Commands ▀ sess-name sess-name Sets the name for a CA session. Product SecGW (WSG) Privilege...
  • Page 2257Connected Apps Configuration Mode Commands sess-passwd ▀ sess-passwd Sets a password for a CA session. Product SecGW (WSG) Privilege Security...
  • Page 2258 Connected Apps Configuration Mode Commands ▀ sess-userid sess-userid Defines a user identifier (username) for the CA session. Product SecGW...
  • Page 2259: Chapter 51 Content Filtering Policy Configuration Mode CommandsChapter 51 Content Filtering Policy Configuration Mode Commands The Content Filtering Policy Configuration Mode allows you to configure analysis and...
  • Page 2260 Content Filtering Policy Configuration Mode Commands ▀ analyze analyze Specifies the action to take for the indicated result after...
  • Page 2261Content Filtering Policy Configuration Mode Commands analyze ▀  ADVERT  ANON  ART  AUTO  BACKUP  BLACK...
  • Page 2262 Content Filtering Policy Configuration Mode Commands ▀ analyze  PEER  PERS  PHOTO  PLAG  POLTIC ...
  • Page 2263Content Filtering Policy Configuration Mode Commands analyze ▀ content-insert content_string: Specifies the content string to be inserted in place of...
  • Page 2264 Content Filtering Policy Configuration Mode Commands ▀ discarded-flow-content-id discarded-flow-content-id Accounts for packets discarded as a result of content filtering...
  • Page 2265Content Filtering Policy Configuration Mode Commands end ▀ end Exits the current configuration mode and returns to the Exec mode....
  • Page 2266 Content Filtering Policy Configuration Mode Commands ▀ exit exit Exits the current mode and returns to the parent configuration...
  • Page 2267Content Filtering Policy Configuration Mode Commands failure-action ▀ failure-action Specifies the failure action when the content filtering analysis results are...
  • Page 2268 Content Filtering Policy Configuration Mode Commands ▀ failure-action Important: Static-and-Dynamic Content Filtering is only supported in 9.0 and later...
  • Page 2269Content Filtering Policy Configuration Mode Commands timeout action ▀ timeout action This command has been deprecated, and is replaced by...
  • Page 2270
  • Page 2271: Chapter 52 Content Filtering Server Group Configuration Mode CommandsChapter 52 Content Filtering Server Group Configuration Mode Commands Content Filtering Server Group Configuration Mode sets the parameters for interoperating...
  • Page 2272 Content Filtering Server Group Configuration Mode Commands ▀ connection retry-timeout connection retry-timeout Configures the TCP connection retry timer for...
  • Page 2273Content Filtering Server Group Configuration Mode Commands deny-message ▀ deny-message Configures the text message that is returned to the subscriber...
  • Page 2274 Content Filtering Server Group Configuration Mode Commands ▀ deny-response code deny-response code Configures the deny response message that is...
  • Page 2275Content Filtering Server Group Configuration Mode Commands dictionary ▀ dictionary Specifies the dictionary to use for requests to the server(s)...
  • Page 2276 Content Filtering Server Group Configuration Mode Commands ▀ dictionary Usage Use this command to specify the standard and customized...
  • Page 2277Content Filtering Server Group Configuration Mode Commands end ▀ end Exits the current configuration mode and returns to the Exec...
  • Page 2278 Content Filtering Server Group Configuration Mode Commands ▀ exit exit Exits the current mode and returns to the parent...
  • Page 2279Content Filtering Server Group Configuration Mode Commands failure-action ▀ failure-action Specifies the actions to be taken when communication between ICAP...
  • Page 2280 Content Filtering Server Group Configuration Mode Commands ▀ failure-action url must be an alphanumeric string of 1 through 128...
  • Page 2281Content Filtering Server Group Configuration Mode Commands failure-action ▀  Redirect: Retransmitted packets are dropped and not charged.  Discard:...
  • Page 2282 Content Filtering Server Group Configuration Mode Commands ▀ icap server icap server Adds an Internet Content Adaptation Protocol (ICAP)...
  • Page 2283Content Filtering Server Group Configuration Mode Commands icap server ▀ priority priority Specifies priority of the ICAP server in the...
  • Page 2284 Content Filtering Server Group Configuration Mode Commands ▀ origin address origin address Specifies a bind address for the Content...
  • Page 2285Content Filtering Server Group Configuration Mode Commands response-timeout ▀ response-timeout Sets the response timeout for the ICAP connection between the...
  • Page 2286 Content Filtering Server Group Configuration Mode Commands ▀ timeout action timeout action This command has been deprecated, and is...
  • Page 2287Content Filtering Server Group Configuration Mode Commands url-extraction ▀ url-extraction Enables configuration of ICAP URL extraction behavior. Product CF Privilege...
  • Page 2288 Content Filtering Server Group Configuration Mode Commands ▀ url-extraction ▄ Command Line Interface Reference, StarOS Release 17 2288
  • Page 2289: Chapter 53 Context Configuration Mode Commands A-DChapter 53 Context Configuration Mode Commands A-D This section includes the commands aaa accounting through domain service. Mode Exec >...
  • Page 2290 Context Configuration Mode Commands A-D ▀ aaa accounting aaa accounting This command enables/disables accounting for subscribers and context-level administrative...
  • Page 2291Context Configuration Mode Commands A-D aaa accounting ▀ Important: The accounting parameters in the APN Configuration Mode take precedence over...
  • Page 2292 Context Configuration Mode Commands A-D ▀ aaa authentication aaa authentication This command enables/disables authentication for subscribers and context-level administrative...
  • Page 2293Context Configuration Mode Commands A-D aaa authentication ▀ Usage Use this command to enable/disable AAA authentication during specific maintenance activities...
  • Page 2294 Context Configuration Mode Commands A-D ▀ aaa constructed-nai aaa constructed-nai This command configures the password used during authentication for...
  • Page 2295Context Configuration Mode Commands A-D aaa constructed-nai ▀ situations in which an outbound username and password are configured and the...
  • Page 2296 Context Configuration Mode Commands A-D ▀ aaa constructed-nai Mobile Subscriber Mobile Country Code Mobile Network Code Identification Number (3...
  • Page 2297Context Configuration Mode Commands A-D aaa filter-id rulebase mapping ▀ aaa filter-id rulebase mapping This command configures the system to...
  • Page 2298 Context Configuration Mode Commands A-D ▀ aaa group aaa group This command enables/disables the creation, configuration or deletion of...
  • Page 2299Context Configuration Mode Commands A-D aaa nai-policy ▀ aaa nai-policy This command sets policies on how Network Access Identifiers (NAIs)...
  • Page 2300 Context Configuration Mode Commands A-D ▀ aaa nai-policy no aaa nai-policy reformat-alg-hex-0-9 ▄ Command Line Interface Reference, StarOS Release...
  • Page 2301Context Configuration Mode Commands A-D access-list undefined ▀ access-list undefined Configures the behavior of access control for the current context...
  • Page 2302 Context Configuration Mode Commands A-D ▀ administrator administrator Configures a user with Security Administrator privileges in the current context....
  • Page 2303Context Configuration Mode Commands A-D administrator ▀ ecs Permits the user to use ACS-specific configuration commands. Default: Permitted expiry-date date_time...
  • Page 2304 Context Configuration Mode Commands A-D ▀ administrator Specifies the maximum time, in seconds, the Security Administrator may have a...
  • Page 2305Context Configuration Mode Commands A-D apn ▀ apn Creates or deletes Access Point Name (APN) templates and enters the APN...
  • Page 2306 Context Configuration Mode Commands A-D ▀ apn  In StarOS v14.0 and later, up to 2048 APNs can be...
  • Page 2307Context Configuration Mode Commands A-D asn-qos-descriptor ▀ asn-qos-descriptor Creates, deletes or manages the Quality of Service (QoS) descriptor table identifier...
  • Page 2308 Context Configuration Mode Commands A-D ▀ asn-qos-descriptor Usage Use this command to configure a QoS description table to manage...
  • Page 2309Context Configuration Mode Commands A-D asn-service-profile ▀ asn-service-profile Creates, deletes or manages the Service Profiles Identifier for Access Service Node...
  • Page 2310 Context Configuration Mode Commands A-D ▀ asn-service-profile Usage Use this command to configure a service profile to apply the...
  • Page 2311Context Configuration Mode Commands A-D asngw-service ▀ asngw-service Creates, deletes or manages an Access Service Node Gateway (ASN-GW) service and...
  • Page 2312 Context Configuration Mode Commands A-D ▀ asngw-service Caution: Large numbers of services greatly increase the complexity of management and...
  • Page 2313Context Configuration Mode Commands A-D asnpc-service ▀ asnpc-service Creates, deletes or manages an ASN Paging Controller service to manage the...
  • Page 2314 Context Configuration Mode Commands A-D ▀ asnpc-service Caution: Large numbers of services greatly increase the complexity of management and...
  • Page 2315Context Configuration Mode Commands A-D associate ▀ associate Associate a global QoS Level 2 mapping table to a VPN context....
  • Page 2316 Context Configuration Mode Commands A-D ▀ atcf atcf This command enables Access Transfer Control Function (ATCF) functionality for the...
  • Page 2317Context Configuration Mode Commands A-D bfd-protocol ▀ bfd-protocol Enables or disables Bidirectional Forwarding Detection (BFD) protocol and enters the BFD...
  • Page 2318 Context Configuration Mode Commands A-D ▀ bgp extended-asn-cap bgp extended-asn-cap Enables or disables the router to send 4-octet ASN...
  • Page 2319Context Configuration Mode Commands A-D bmsc-profile ▀ bmsc-profile Creates or deletes Broadcast Multicast Service Center (BM-SC) profiles and enters the...
  • Page 2320 Context Configuration Mode Commands A-D ▀ busyout ip busyout ip Makes addresses from an IPv4 pool in the current...
  • Page 2321Context Configuration Mode Commands A-D busyout ip ▀ name pool_name Applies the named IP pool or IP pool group in...
  • Page 2322 Context Configuration Mode Commands A-D ▀ busyout ipv6 busyout ipv6 Makes addresses from an IPv6 pool in the current...
  • Page 2323Context Configuration Mode Commands A-D busyout ipv6 ▀ name pool_name Applies the named IPv6 pool or IPv6 pool group in...
  • Page 2324 Context Configuration Mode Commands A-D ▀ cae-group cae-group Creates a CAE group, which is a CAE server cluster that...
  • Page 2325Context Configuration Mode Commands A-D camel-service ▀ camel-service Creates an instance of the Customized Applications for Mobile Enhanced Logic (CAMEL)...
  • Page 2326 Context Configuration Mode Commands A-D ▀ cbs-service cbs-service Creates a new Cell Broadcasting Service (CBS) or specifies an existing...
  • Page 2327Context Configuration Mode Commands A-D cipher-suite ▀ cipher-suite Creates a new SSL cipher suite or specifies an existing cipher suite...
  • Page 2328 Context Configuration Mode Commands A-D ▀ class-map class-map Creates or deletes a class map. If the class-map is newly...
  • Page 2329Context Configuration Mode Commands A-D class-map ▀ Usage Use this command to enter in Class-Map Configuration Mode to set classification...
  • Page 2330 Context Configuration Mode Commands A-D ▀ closedrp-rp handoff closedrp-rp handoff Enables or disables session handoff between Closed-RP and RP...
  • Page 2331Context Configuration Mode Commands A-D config-administrator ▀ config-administrator Configures a context-level configuration administrator account within the current context. Product All...
  • Page 2332 Context Configuration Mode Commands A-D ▀ config-administrator ecs Permits the user access to ACS-specific configuration commands. Default: Enhanced Charging...
  • Page 2333Context Configuration Mode Commands A-D config-administrator ▀ Specifies the maximum amount of idle time, in seconds, the context-level administrator may...
  • Page 2334 Context Configuration Mode Commands A-D ▀ content-filtering content-filtering Enables or disables the creation, configuration or deletion of Content Filtering...
  • Page 2335Context Configuration Mode Commands A-D credit-control-service ▀ credit-control-service Enables or disables the creation, configuration or deletion of credit-control services. Product...
  • Page 2336 Context Configuration Mode Commands A-D ▀ credit-control-service credit-control-service test159 ▄ Command Line Interface Reference, StarOS Release 17 2336
  • Page 2337Context Configuration Mode Commands A-D crypto dns-nameresolver ▀ crypto dns-nameresolver Enables or disables the reverse DNS query from a Security...
  • Page 2338 Context Configuration Mode Commands A-D ▀ crypto group crypto group Creates or deletes a crypto group and enters the...
  • Page 2339Context Configuration Mode Commands A-D crypto ipsec transform-set ▀ crypto ipsec transform-set Configures transform-sets on the system and enters the...
  • Page 2340 Context Configuration Mode Commands A-D ▀ crypto ipsec transform-set cipher If ESP is enabled, this option must be used...
  • Page 2341Context Configuration Mode Commands A-D crypto map ▀ crypto map Configures the name of the policy and enters the specified...
  • Page 2342 Context Configuration Mode Commands A-D ▀ crypto map Usage Crypto Maps define the policies that determine how IPSec is...
  • Page 2343Context Configuration Mode Commands A-D crypto template ▀ crypto template Creates a new or specifies an existing crypto template and...
  • Page 2344 Context Configuration Mode Commands A-D ▀ crypto template crypto template crypto1 ikev2-dynamic ▄ Command Line Interface Reference, StarOS Release...
  • Page 2345Context Configuration Mode Commands A-D cscf access-profile ▀ cscf access-profile Creates a new or enters an existing access profile used...
  • Page 2346 Context Configuration Mode Commands A-D ▀ cscf acl cscf acl Creates an Access Control List (ACL) and enters the...
  • Page 2347Context Configuration Mode Commands A-D cscf diameter-selection ▀ cscf diameter-selection Creates a CDF or HSS diameter selection table and enters...
  • Page 2348 Context Configuration Mode Commands A-D ▀ cscf diameter-selection The following command creates an HSS diameter selection table and enters...
  • Page 2349Context Configuration Mode Commands A-D cscf ifc-filter-criteria ▀ cscf ifc-filter-criteria Creates Initial Filter Criteria (iFC) filter criteria for shared iFC...
  • Page 2350 Context Configuration Mode Commands A-D ▀ cscf ifc-filter-criteria as-default-handling { session-continue | session-terminate } Determines whether the dialog should...
  • Page 2351Context Configuration Mode Commands A-D cscf ifc-spt-condition ▀ cscf ifc-spt-condition Creates an Initial Filter Criteria (iFC) Service Point Trigger (SPT)...
  • Page 2352 Context Configuration Mode Commands A-D ▀ cscf ifc-spt-condition session-description sdp [ content sdp_data ] Specifies an SDP line type....
  • Page 2353Context Configuration Mode Commands A-D cscf ifc-spt-group ▀ cscf ifc-spt-group Creates an Initial Filter Criteria (iFC) Service Point Trigger (SPT)...
  • Page 2354 Context Configuration Mode Commands A-D ▀ cscf ifc-spt-group [context_name]hostname(config-cscf-ifc-spt-group)# iFC SPT Group Configuration Mode commands are defined in the...
  • Page 2355Context Configuration Mode Commands A-D cscf ifc-trigger-point ▀ cscf ifc-trigger-point Creates an Initial Filter Criteria (iFC) trigger point for shared...
  • Page 2356 Context Configuration Mode Commands A-D ▀ cscf ifc-trigger-point Example The following command creates iFC trigger point 11 with a...
  • Page 2357Context Configuration Mode Commands A-D cscf isc-template ▀ cscf isc-template Creates an IMS Service Control (ISC) template and enters the...
  • Page 2358 Context Configuration Mode Commands A-D ▀ cscf last-route-profile cscf last-route-profile Creates a last route profile, which will be specified...
  • Page 2359Context Configuration Mode Commands A-D cscf last-route-profile ▀ Important: Last route profiles are associated with peer servers in the CSCF...
  • Page 2360 Context Configuration Mode Commands A-D ▀ cscf peer-servers cscf peer-servers Creates a peer server type for next-hop session routing...
  • Page 2361Context Configuration Mode Commands A-D cscf peer-servers ▀ Usage Use this command to create a specific peer server and enter...
  • Page 2362 Context Configuration Mode Commands A-D ▀ cscf peer-servers-group cscf peer-servers-group Creates a peer servers group and enters the Peer...
  • Page 2363Context Configuration Mode Commands A-D cscf peer-servers-group ▀ Usage Use this command to create a specific peer servers group and...
  • Page 2364 Context Configuration Mode Commands A-D ▀ cscf policy cscf policy Creates a policy group for specific AoR profiles and...
  • Page 2365Context Configuration Mode Commands A-D cscf policy ▀ The following command creates a policy group named group2 and enters the...
  • Page 2366 Context Configuration Mode Commands A-D ▀ cscf prefix-table cscf prefix-table Creates a CSCF prefix table and enters the CSCF...
  • Page 2367Context Configuration Mode Commands A-D cscf routes ▀ cscf routes Creates a route group for specifying routing information and enters...
  • Page 2368 Context Configuration Mode Commands A-D ▀ cscf service cscf service Creates a CSCF service or specifies an existing CSCF...
  • Page 2369Context Configuration Mode Commands A-D cscf service ▀ [context_name]hostname(config-cscf-service)# CSCF Service Configuration Mode commands are defined in the CSCF Service...
  • Page 2370 Context Configuration Mode Commands A-D ▀ cscf session-template cscf session-template Creates a session template and/or enters the Session Template...
  • Page 2371Context Configuration Mode Commands A-D cscf session-template ▀ cscf session-template name sess_temp4 Command Line Interface Reference, StarOS Release 17 ▄...
  • Page 2372 Context Configuration Mode Commands A-D ▀ cscf subdomain-routes cscf subdomain-routes Creates subdomain-route list and enters the Subdomain-route List Configuration...
  • Page 2373Context Configuration Mode Commands A-D cscf translation ▀ cscf translation Creates a translation list and enters the Translation Configuration Mode....
  • Page 2374 Context Configuration Mode Commands A-D ▀ cscf translation The following command enters the Translation Configuration Mode for a translation...
  • Page 2375Context Configuration Mode Commands A-D cscf urn-service-list ▀ cscf urn-service-list Creates a URN service list and enters the URN List...
  • Page 2376 Context Configuration Mode Commands A-D ▀ cscf urn-service-list cscf urn-service-list name urn_list1 ▄ Command Line Interface Reference, StarOS Release...
  • Page 2377Context Configuration Mode Commands A-D css server ▀ css server In StarOS 9.0 and later releases, this command is obsolete....
  • Page 2378 Context Configuration Mode Commands A-D ▀ description description Allows you to enter descriptive text for this configuration. Product All...
  • Page 2379Context Configuration Mode Commands A-D dhcp-client-profile ▀ dhcp-client-profile Adds a specified Dynamic Host Control Protocol (DHCP) client profile name to...
  • Page 2380 Context Configuration Mode Commands A-D ▀ dhcp-client-profile Example The following command creates a DHCP client profile called test_profile :...
  • Page 2381Context Configuration Mode Commands A-D dhcp-server-profile ▀ dhcp-server-profile Adds a specified Dynamic Host Control Protocol (DHCP) server profile name to...
  • Page 2382 Context Configuration Mode Commands A-D ▀ dhcp-server-profile The following command creates a DHCP server profile called test_server_profile : dhcp-server-profile...
  • Page 2383Context Configuration Mode Commands A-D dhcp-service ▀ dhcp-service Adds a Dynamic Host Control Protocol (DHCP) service instance to the current...
  • Page 2384 Context Configuration Mode Commands A-D ▀ dhcp-service A maximum of 256 services (regardless of type) can be configured per...
  • Page 2385Context Configuration Mode Commands A-D dhcpv6-service ▀ dhcpv6-service Creates a specified DHCPv6 service name to allow configuration of DHCPv6 service...
  • Page 2386 Context Configuration Mode Commands A-D ▀ dhcpv6-service [context_name]hostname(config-dhcpv6-service)# DHCPv6 Service Configuration Mode commands are defined in the DHCPv6 Service...
  • Page 2387Context Configuration Mode Commands A-D diameter accounting ▀ diameter accounting This command configures Diameter accounting related settings. Product All Privilege...
  • Page 2388 Context Configuration Mode Commands A-D ▀ diameter accounting request-timeout:20 seconds dictionary { aaa-custom1 | aaa-custom10 | aaa-custom2 | aaa-custom3...
  • Page 2389Context Configuration Mode Commands A-D diameter accounting ▀ request-timeout duration Specifies how long the system will wait for a response...
  • Page 2390 Context Configuration Mode Commands A-D ▀ diameter authentication diameter authentication This command configures Diameter authentication related settings. Product All...
  • Page 2391Context Configuration Mode Commands A-D diameter authentication ▀  max-transmissions: Sets the configured maximum transmission attempts for Diameter authentication in...
  • Page 2392 Context Configuration Mode Commands A-D ▀ diameter authentication just-primary:Redirect only to primary host. primary-then-secondary:Redirect to primary host, if fails...
  • Page 2393Context Configuration Mode Commands A-D diameter authentication failure-handling ▀ diameter authentication failure-handling This command configures error handling for Diameter EAP...
  • Page 2394 Context Configuration Mode Commands A-D ▀ diameter authentication failure-handling  retry-and-terminate:First retries, if it fails then terminates the session...
  • Page 2395Context Configuration Mode Commands A-D diameter dictionary ▀ diameter dictionary This command is deprecated and is replaced by the diameter...
  • Page 2396 Context Configuration Mode Commands A-D ▀ diameter endpoint diameter endpoint This command enables the creation, configuration or deletion of...
  • Page 2397Context Configuration Mode Commands A-D diameter sctp ▀ diameter sctp This command configures Diameter SCTP parameters for all Diameter endpoints...
  • Page 2398 Context Configuration Mode Commands A-D ▀ diameter sctp The following command configures the maximum number of consecutive retransmissions to...
  • Page 2399Context Configuration Mode Commands A-D diameter origin ▀ diameter origin This command is deprecated and is replaced by the diameter...
  • Page 2400 Context Configuration Mode Commands A-D ▀ dns-client dns-client Creates a DNS client and/or enters the DNS Client Configuration Mode....
  • Page 2401Context Configuration Mode Commands A-D domain ▀ domain Configures a domain alias for the current context. Product HA PDSN Privilege...
  • Page 2402 Context Configuration Mode Commands A-D ▀ domain Usage Use this command to configure a domain alias when a single...
  • Page 2403: Chapter 54 Context Configuration Mode Commands E-HChapter 54 Context Configuration Mode Commands E-H This section includes the commands edr-module active-charging-service through hss-peer-service. Mode Exec > Global...
  • Page 2404 Context Configuration Mode Commands E-H ▀ eap-profile eap-profile Creates a new, or specifies an existing, Extensible Authentication Protocol (EAP)...
  • Page 2405Context Configuration Mode Commands E-H edr-module active-charging-service ▀ edr-module active-charging-service Enables the creation, configuration, or deletion of the Event Data...
  • Page 2406 Context Configuration Mode Commands E-H ▀ edr-module active-charging-service [context_name]hostname(config-redr)# Example The following command creates the EDR module for the...
  • Page 2407Context Configuration Mode Commands E-H egtp-service ▀ egtp-service Creates an eGTP service or specifies an existing eGTP service and enters...
  • Page 2408 Context Configuration Mode Commands E-H ▀ egtp-service Caution: Large numbers of services greatly increase the complexity of management and...
  • Page 2409Context Configuration Mode Commands E-H end ▀ end Exits the current configuration mode and returns to the Exec mode. Product...
  • Page 2410 Context Configuration Mode Commands E-H ▀ epdg-service epdg-service Creates Evolved Packet Data GateWay service and enters EPDG service configuration...
  • Page 2411Context Configuration Mode Commands E-H epdg-service ▀ The following command will enter the ePDG Service Configuration Mode creating the service...
  • Page 2412 Context Configuration Mode Commands E-H ▀ event-notif-endpoint event-notif-endpoint Enables creation, configuration or deletion of an Event Notification collection server...
  • Page 2413Context Configuration Mode Commands E-H event-notif-endpoint ▀ event-notif-endpoint event_intfc_3 Command Line Interface Reference, StarOS Release 17 ▄ 2413
  • Page 2414 Context Configuration Mode Commands E-H ▀ exit exit Exits the current mode and returns to the parent configuration mode....
  • Page 2415Context Configuration Mode Commands E-H external-inline-server ▀ external-inline-server This is a restricted command. Command Line Interface Reference, StarOS Release 17...
  • Page 2416 Context Configuration Mode Commands E-H ▀ fa-service fa-service Creates or deletes a foreign agent (FA) service or specifies an...
  • Page 2417Context Configuration Mode Commands E-H fa-service ▀ Example The following command will enter the FA Service Configuration Mode creating the...
  • Page 2418 Context Configuration Mode Commands E-H ▀ firewall max-associations firewall max-associations This command is obsolete. ▄ Command Line Interface Reference,...
  • Page 2419Context Configuration Mode Commands E-H fng-service ▀ fng-service Creates a new, or specifies an existing FNG service and enters the...
  • Page 2420 Context Configuration Mode Commands E-H ▀ ggsn-service ggsn-service Creates or deletes a Gateway GPRS Support Node (GGSN) service and...
  • Page 2421Context Configuration Mode Commands E-H ggsn-service ▀ The following command creates a GGSN service named ggsn1: ggsn-service ggsn1 Command Line...
  • Page 2422 Context Configuration Mode Commands E-H ▀ gprs-service gprs-service Creates a GPRS service instance and enters the GPRS Service Configuration...
  • Page 2423Context Configuration Mode Commands E-H gprs-service ▀ gprs-service gprs1 The following command removes the GPRS service named gprs1: no gprs-service...
  • Page 2424 Context Configuration Mode Commands E-H ▀ gs-service gs-service Creates a Gs service instance and enters the Gs Service Configuration...
  • Page 2425Context Configuration Mode Commands E-H gs-service ▀ The following command removes the Gs service named gs1: no gs-service gs1 Command...
  • Page 2426 Context Configuration Mode Commands E-H ▀ gtpc overload-protection egress gtpc overload-protection egress Configures the over-load protection of GGSN/PGW by...
  • Page 2427Context Configuration Mode Commands E-H gtpc overload-protection ingress ▀ gtpc overload-protection ingress Configures the over-load protection of GGSN/PGW by throttling...
  • Page 2428 Context Configuration Mode Commands E-H ▀ gtpc overload-protection ingress The following command enables the incoming GTP control messages in...
  • Page 2429Context Configuration Mode Commands E-H gtpp algorithm ▀ gtpp algorithm Configures GTPP routing algorithms for the current context. This command...
  • Page 2430 Context Configuration Mode Commands E-H ▀ gtpp attribute gtpp attribute Allows the specification of the optional attributes to be...
  • Page 2431Context Configuration Mode Commands E-H gtpp attribute ▀ flag | lapi | local-record-sequence-number | losdv | ms-timezone | msisdn |...
  • Page 2432 Context Configuration Mode Commands E-H ▀ gtpp attribute apn-ni Default: Enabled This keyword controls the inclusion of the optional...
  • Page 2433Context Configuration Mode Commands E-H gtpp attribute ▀ duration-ms Specifies that the information contained in the mandatory Duration field be...
  • Page 2434 Context Configuration Mode Commands E-H ▀ gtpp attribute This keyword controls the inclusion of the optional field “IMSI Unauthenticated...
  • Page 2435Context Configuration Mode Commands E-H gtpp attribute ▀ node-id-suffix STRING Default: Disabled Specifies the configured Node-ID-Suffix to use in the...
  • Page 2436 Context Configuration Mode Commands E-H ▀ gtpp attribute Normally when SGSN PLMN-id information is not available, the attribute sgsnPLMNIdentifier...
  • Page 2437Context Configuration Mode Commands E-H gtpp attribute ▀ Important: This attribute will not be displayed if the GTPP dictionary is...
  • Page 2438 Context Configuration Mode Commands E-H ▀ gtpp attribute This feature is implemented to be in compliance with Release 11...
  • Page 2439Context Configuration Mode Commands E-H gtpp charging-agent ▀ gtpp charging-agent Configures the IP address and port of the system interface...
  • Page 2440 Context Configuration Mode Commands E-H ▀ gtpp charging-agent This command instructs the system as to what interface to use....
  • Page 2441Context Configuration Mode Commands E-H gtpp data-record-format-version ▀ gtpp data-record-format-version Encodes the data record format version. The version indicates the...
  • Page 2442 Context Configuration Mode Commands E-H ▀ gtpp data-request sequence-numbers gtpp data-request sequence-numbers Configures the range of sequence numbers to...
  • Page 2443Context Configuration Mode Commands E-H gtpp dead-server suppress-cdrs ▀ gtpp dead-server suppress-cdrs Enables or disables CDR archiving when a dead...
  • Page 2444 Context Configuration Mode Commands E-H ▀ gtpp deadtime gtpp deadtime Configures the amount of time to wait before attempting...
  • Page 2445Context Configuration Mode Commands E-H gtpp detect-dead-server ▀ gtpp detect-dead-server Configures the number of consecutive communication failures that could occur...
  • Page 2446 Context Configuration Mode Commands E-H ▀ gtpp detect-dead-server If the system receives a GTPP Node Alive Request, Echo Request,...
  • Page 2447Context Configuration Mode Commands E-H gtpp dictionary ▀ gtpp dictionary Designates a dictionary used by GTPP for a specific context....
  • Page 2448 Context Configuration Mode Commands E-H ▀ gtpp dictionary custom4 This is a custom-defined dictionary that conforms to TS 32.015...
  • Page 2449Context Configuration Mode Commands E-H gtpp dictionary ▀ Important: Note that the following warning message will be displayed whenever an...
  • Page 2450 Context Configuration Mode Commands E-H ▀ gtpp duplicate-hold-time gtpp duplicate-hold-time Configures the number of minutes to hold on to...
  • Page 2451Context Configuration Mode Commands E-H gtpp echo-interval ▀ gtpp echo-interval Configures the frequency at which the system sends GTPP echo...
  • Page 2452 Context Configuration Mode Commands E-H ▀ gtpp echo-interval  Upon the execution of the gtpp sequence-numbers private-extensions command as...
  • Page 2453Context Configuration Mode Commands E-H gtpp egcdr ▀ gtpp egcdr Configures the eG-CDR and P-CDR (P-GW CDR) parameters and triggers....
  • Page 2454 Context Configuration Mode Commands E-H ▀ gtpp egcdr  normal-release: Specifies to send Normal Release as causeForRecordClosing in PGW-CDRs....
  • Page 2455Context Configuration Mode Commands E-H gtpp egcdr ▀ In this release, both current and new framework are functional to enable...
  • Page 2456 Context Configuration Mode Commands E-H ▀ gtpp egcdr When the PDP context is terminated, all service data flow containers...
  • Page 2457Context Configuration Mode Commands E-H gtpp error-response ▀ gtpp error-response Configures the response when the system receives an error response...
  • Page 2458 Context Configuration Mode Commands E-H ▀ gtpp group gtpp group Configures GTPP server group in a context for the...
  • Page 2459Context Configuration Mode Commands E-H gtpp group ▀ Example The following command configures a GTPP server group named star1 for...
  • Page 2460 Context Configuration Mode Commands E-H ▀ gtpp max-cdrs gtpp max-cdrs Configures the maximum number of charging data records (CDRs)...
  • Page 2461Context Configuration Mode Commands E-H gtpp max-cdrs ▀ gtpp max-cdrs 10 Command Line Interface Reference, StarOS Release 17 ▄ 2461...
  • Page 2462 Context Configuration Mode Commands E-H ▀ gtpp max-pdu-size gtpp max-pdu-size Configures the maximum payload size of a single GTPP...
  • Page 2463Context Configuration Mode Commands E-H gtpp max-pdu-size ▀ UDP headers, and because the system may need to encapsulate GTPP packets...
  • Page 2464 Context Configuration Mode Commands E-H ▀ gtpp max-retries gtpp max-retries Configures the maximum number of times the system attempts...
  • Page 2465Context Configuration Mode Commands E-H gtpp max-retries ▀ gtpp max-retries 8 Command Line Interface Reference, StarOS Release 17 ▄ 2465...
  • Page 2466 Context Configuration Mode Commands E-H ▀ gtpp node-id gtpp node-id Configures the GTPP Node ID for all CDRs. Product...
  • Page 2467Context Configuration Mode Commands E-H gtpp redirection-allowed ▀ gtpp redirection-allowed Configures the system to allow or disallow the redirection of...
  • Page 2468 Context Configuration Mode Commands E-H ▀ gtpp redirection-disallowed gtpp redirection-disallowed This command has been obsoleted and is replaced by...
  • Page 2469Context Configuration Mode Commands E-H gtpp server ▀ gtpp server Configures the Charging Gateway Function (CGF) accounting server(s) with which...
  • Page 2470 Context Configuration Mode Commands E-H ▀ gtpp server priority can be configured as an integer from 1 through 1000....
  • Page 2471Context Configuration Mode Commands E-H gtpp source-port-validation ▀ gtpp source-port-validation Toggles port checking for node alive/echo/redirection requests from the CGF....
  • Page 2472 Context Configuration Mode Commands E-H ▀ gtpp storage-server gtpp storage-server Configures information for the GTPP back-up storage server. Product...
  • Page 2473Context Configuration Mode Commands E-H gtpp storage-server local file ▀ gtpp storage-server local file Configures the parameters for GTPP files...
  • Page 2474 Context Configuration Mode Commands E-H ▀ gtpp storage-server local file Default: Disabled format { custom-n } Configures the file...
  • Page 2475Context Configuration Mode Commands E-H gtpp storage-server local file ▀ This keyword also deletes the processed push files (tx.*,under $CDR_PATH/TX/tx.*)...
  • Page 2476 Context Configuration Mode Commands E-H ▀ gtpp storage-server local file start-file-seq-num seq_num [ recover-file-seq-num ] Specifies the start sequence...
  • Page 2477Context Configuration Mode Commands E-H gtpp storage-server max-retries ▀ gtpp storage-server max-retries Configures the maximum number of times the system...
  • Page 2478 Context Configuration Mode Commands E-H ▀ gtpp storage-server mode gtpp storage-server mode Configures storage mode, local or remote, for...
  • Page 2479Context Configuration Mode Commands E-H gtpp storage-server mode ▀ Usage This command configures whether the CDRs should be stored on...
  • Page 2480 Context Configuration Mode Commands E-H ▀ gtpp storage-server timeout gtpp storage-server timeout Configures the amount of time that must...
  • Page 2481Context Configuration Mode Commands E-H gtpp suppress-cdrs zero-volume ▀ gtpp suppress-cdrs zero-volume This command suppresses the CDRs with zero byte...
  • Page 2482 Context Configuration Mode Commands E-H ▀ gtpp suppress-cdrs zero-volume To suppress final zero volume CDRs and interim zero volume...
  • Page 2483Context Configuration Mode Commands E-H gtpp suppress-cdrs zero-volume-and-duration ▀ gtpp suppress-cdrs zero-volume-and-duration Suppresses the CDRs created by sessions having zero...
  • Page 2484 Context Configuration Mode Commands E-H ▀ gtpp timeout gtpp timeout Configures the amount of time that must pass with...
  • Page 2485Context Configuration Mode Commands E-H gtpp trigger ▀ gtpp trigger This command is left in place for backward compatibility. To...
  • Page 2486 Context Configuration Mode Commands E-H ▀ gtpp transport-layer gtpp transport-layer Selects the transport layer protocol for the Ga interface...
  • Page 2487Context Configuration Mode Commands E-H gtpu-service ▀ gtpu-service Creates a GTP-U service or specifies an existing GTP-U service and enters...
  • Page 2488 Context Configuration Mode Commands E-H ▀ gtpu-service large number of services only be configured if your application absolutely requires...
  • Page 2489Context Configuration Mode Commands E-H ha-service ▀ ha-service Creates/deletes a home agent service or specifies an existing HA service for...
  • Page 2490 Context Configuration Mode Commands E-H ▀ ha-service ha-service sampleService The following command will remove sampleService as being a defined...
  • Page 2491Context Configuration Mode Commands E-H hnbgw-service ▀ hnbgw-service Creates or removes an Home Node B Gateway (HNB-GW) service or configures...
  • Page 2492 Context Configuration Mode Commands E-H ▀ hnbgw-service Entering this command results in the following prompt: [context_name]hostname(config-hnbgw-service)# The commands available...
  • Page 2493Context Configuration Mode Commands E-H hsgw-service ▀ hsgw-service Creates an HSGW service or specifies an existing HSGW service and enters...
  • Page 2494 Context Configuration Mode Commands E-H ▀ hsgw-service [context_name]hostname(config-hsgw-service)# HSGW Service Configuration Mode commands are defined in the HSGW Service...
  • Page 2495Context Configuration Mode Commands E-H hss-peer-service ▀ hss-peer-service Creates a Home Subscriber Service (HSS) peer service or configures an existing...
  • Page 2496 Context Configuration Mode Commands E-H ▀ hss-peer-service Caution: A maximum of 256 services (regardless of type) can be configured...
  • Page 2497: Chapter 55 Context Configuration Mode Commands I-MChapter 55 Context Configuration Mode Commands I-M This section includes the commands ikev1 disable-initial-contact through multicast-proxy service. Mode Exec >...
  • Page 2498 Context Configuration Mode Commands I-M ▀ ikev1 disable-initial-contact ikev1 disable-initial-contact Disables the sending of the INITIAL-CONTACT message in the...
  • Page 2499Context Configuration Mode Commands I-M ikev1 disable-phase1-rekey ▀ ikev1 disable-phase1-rekey Configures the rekeying of Phase1 SA when the Internet Security...
  • Page 2500 Context Configuration Mode Commands I-M ▀ ikev1 keepalive dpd ikev1 keepalive dpd Configures the ISAKMP IPSec Dead Peer Detection...
  • Page 2501Context Configuration Mode Commands I-M ikev1 keepalive dpd ▀ This functionality is for use with the Redundant IPSec Tunnel Fail-over...
  • Page 2502 Context Configuration Mode Commands I-M ▀ ikev1 policy ikev1 policy Configures or creates an ISAKMP policy with the specified...
  • Page 2503Context Configuration Mode Commands I-M ikev2-ikesa ▀ ikev2-ikesa Creates a new, or specifies an existing, IKEv2 security association parameters and...
  • Page 2504 Context Configuration Mode Commands I-M ▀ ikev2-ikesa IKEv2 Security Association Configuration Mode commands are defined in the IKEv2 Security...
  • Page 2505Context Configuration Mode Commands I-M ims-auth-service ▀ ims-auth-service This command enables the creation, configuration or deletion of an IMS authorization...
  • Page 2506 Context Configuration Mode Commands I-M ▀ ims-auth-service Usage Use this command to create/configure/delete an IMS authorization service for Gx...
  • Page 2507Context Configuration Mode Commands I-M ims-sh-service ▀ ims-sh-service Creates the specified IP Multimedia Subsystem (IMS) Sh service name to allow...
  • Page 2508 Context Configuration Mode Commands I-M ▀ inspector inspector Configures a context-level inspector account within the current context. Product All...
  • Page 2509Context Configuration Mode Commands I-M inspector ▀ noecs: Prevents the specific user to access ACS-specific configuration commands. expiry-date date_time Specifies...
  • Page 2510 Context Configuration Mode Commands I-M ▀ inspector The following command removes a context-level inspector account named user1: no inspector...
  • Page 2511Context Configuration Mode Commands I-M interface ▀ interface Creates or deletes an interface or specifies an existing interface. By identifying...
  • Page 2512 Context Configuration Mode Commands I-M ▀ interface point-to-point Creates a permanent virtual connection (PVC) in the current context and...
  • Page 2513Context Configuration Mode Commands I-M ip access-group ▀ ip access-group Configures an access group with an Access Control List (ACL)...
  • Page 2514 Context Configuration Mode Commands I-M ▀ ip access-group Refer to the Access Control Lists appendix of the System Administration...
  • Page 2515Context Configuration Mode Commands I-M ip access-list ▀ ip access-list Enables creation, configuration or deletion of an IP Access List...
  • Page 2516 Context Configuration Mode Commands I-M ▀ ip access-list Refer to the Access Control Lists appendix of the System Administration...
  • Page 2517Context Configuration Mode Commands I-M ip arp ▀ ip arp Configures the allocation retention priority (ARP) options for the current...
  • Page 2518 Context Configuration Mode Commands I-M ▀ ip arp ip arp 10.2.3.4 F1:E2:D4:C5:B6:A7 no ip arp 10.2.3.4 The following commands...
  • Page 2519Context Configuration Mode Commands I-M ip as-path access-list ▀ ip as-path access-list Defines Border Gateway Protocol (BGP) Autonomous System (AS)...
  • Page 2520 Context Configuration Mode Commands I-M ▀ ip community-list ip community-list Configures filtering via a BGP community list. To filter...
  • Page 2521Context Configuration Mode Commands I-M ip community-list ▀  internet – Advertise this route to the internet community, and any...
  • Page 2522 Context Configuration Mode Commands I-M ▀ ip dns-proxy source-address ip dns-proxy source-address Enables the proxy DNS functionality and identifies...
  • Page 2523Context Configuration Mode Commands I-M ip domain-lookup ▀ ip domain-lookup Enables or disables domain name lookup via domain name servers...
  • Page 2524 Context Configuration Mode Commands I-M ▀ ip domain-name ip domain-name Configures or removes a logical domain name for the...
  • Page 2525Context Configuration Mode Commands I-M ip extcommunity-list ▀ ip extcommunity-list Configures route target filtering via a BGP extended community list....
  • Page 2526 Context Configuration Mode Commands I-M ▀ ip extcommunity-list A BGP extended community defines a route target. MPLS VPNs use...
  • Page 2527Context Configuration Mode Commands I-M ip forward ▀ ip forward Configures an IP forwarding policy to forward outgoing pool packets...
  • Page 2528 Context Configuration Mode Commands I-M ▀ ip guarantee ip guarantee Enables and disables local switching of framed route packets....
  • Page 2529Context Configuration Mode Commands I-M ip identification packet-size-threshold ▀ ip identification packet-size-threshold Configures the packet size above which system will...
  • Page 2530 Context Configuration Mode Commands I-M ▀ ip igmp profile ip igmp profile Configures an Internet Group Management Protocol (IGMP)...
  • Page 2531Context Configuration Mode Commands I-M ip localhost ▀ ip localhost Configures or removes the static local host logical name to...
  • Page 2532 Context Configuration Mode Commands I-M ▀ ip name-servers ip name-servers Modifies the list of domain name servers the current...
  • Page 2533Context Configuration Mode Commands I-M ip name-servers ▀ Example ip name-servers 10.2.3.4 Command Line Interface Reference, StarOS Release 17 ▄...
  • Page 2534 Context Configuration Mode Commands I-M ▀ ip pool ip pool Enables creation, configuration or deletion of IP address pools...
  • Page 2535Context Configuration Mode Commands I-M ip pool ▀ no Removes the specified IP address pool from the current context’s configuration,...
  • Page 2536 Context Configuration Mode Commands I-M ▀ ip pool public [ priority ] Address pool is used in priority order...
  • Page 2537Context Configuration Mode Commands I-M ip pool ▀ pool-hold: Set an alert based on the percentage of IP addresses from...
  • Page 2538 Context Configuration Mode Commands I-M ▀ ip pool  users_per_ip: Specifies how many users can share a single NAT...
  • Page 2539Context Configuration Mode Commands I-M ip pool ▀ size must be an integer from 32 through 32256 (in multiples of...
  • Page 2540 Context Configuration Mode Commands I-M ▀ ip pool Important: In UMTS deployments, on upgrading from Release 8.1 to Release...
  • Page 2541Context Configuration Mode Commands I-M ip pool ▀  on-demand: Specifies allocating IP address when matching data traffic begins. ...
  • Page 2542 Context Configuration Mode Commands I-M ▀ ip pool Important: This functionality is currently supported for use with systems configured...
  • Page 2543Context Configuration Mode Commands I-M ip pool ▀ explicit-route-advertise When enabled, the output of show ip pool verbose includes the...
  • Page 2544 Context Configuration Mode Commands I-M ▀ ip pool Important: In static allocation scenario, the pool group name is returned...
  • Page 2545Context Configuration Mode Commands I-M ip pool ▀ and VLAN. A maximum of 128 over-lapping pools can be configured per...
  • Page 2546 Context Configuration Mode Commands I-M ▀ ip prefix-list ip prefix-list Creates an IP prefix list for filtering routes. Product...
  • Page 2547Context Configuration Mode Commands I-M ip prefix-list ▀ network_address/net_mask: the IP address and the length, in bits, of the network...
  • Page 2548 Context Configuration Mode Commands I-M ▀ ip prefix-list sequence-number ip prefix-list sequence-number Enables or disables the inclusion of IP...
  • Page 2549Context Configuration Mode Commands I-M ip route ▀ ip route Adds or removes routing information from the current context’s configuration....
  • Page 2550 Context Configuration Mode Commands I-M ▀ ip route gateway_ip_address | next-hop next_hop_ip_address | point-to-point | tunnel Specifies which device...
  • Page 2551Context Configuration Mode Commands I-M ip route ▀ Usage Use this command to configure IP route parameters. precedence and cost...
  • Page 2552 Context Configuration Mode Commands I-M ▀ ip routing maximum-paths ip routing maximum-paths Enables Equal Cost Multiple Path (ECMP) routing...
  • Page 2553Context Configuration Mode Commands I-M ip routing overlap-pool ▀ ip routing overlap-pool Configures the routing behavior for overlap-pool addresses. Product...
  • Page 2554 Context Configuration Mode Commands I-M ▀ ip rri ip rri Configures Reverse Route Injection (RRI) egress clear port IPv4...
  • Page 2555Context Configuration Mode Commands I-M ip rri-route ▀ ip rri-route Configures High Availability (HA) IPv4 routing parameters for Reverse Route...
  • Page 2556 Context Configuration Mode Commands I-M ▀ ip rri-route vrf vrf_name Specifies the name of an existing VRF as an...
  • Page 2557Context Configuration Mode Commands I-M ip sri-route ▀ ip sri-route Configures Layer 3 (L3) High Availability (HA) IPv4 routing parameters...
  • Page 2558 Context Configuration Mode Commands I-M ▀ ip vrf ip vrf Creates a Virtual Routing and Forwarding (VRF) context instance,...
  • Page 2559Context Configuration Mode Commands I-M ip vrf ▀  A maximum of 100 VRF context instances can be configured on...
  • Page 2560 Context Configuration Mode Commands I-M ▀ ip vrf-list ip vrf-list Creates a VRF list and adds VRFs to the...
  • Page 2561Context Configuration Mode Commands I-M ipms ▀ ipms Enables/disables/manages an intelligent packet monitoring system (IPMS) client service and enters the...
  • Page 2562 Context Configuration Mode Commands I-M ▀ ipne-service ipne-service Create and/or configure an IPNE service. Product MME Privilege Security Administrator,...
  • Page 2563Context Configuration Mode Commands I-M ipsec replay ▀ ipsec replay Configures IKEv2 IPSec specific anti-replay. Product ePDG PDIF SCM Privilege...
  • Page 2