Cisco Cisco ASR 5000

MURAL Software Standard Installation Guide

(config) #

gms pxeBoot cluster all node all ucsManagerIP

<IP of UCS Manager> loginName <User Name> loginPassword

<User Password>

For example:

(config) #

gms pxeBoot cluster all node all ucsManagerIP

192.168.125.4 loginName Gurgaon\uttam.meena loginPassword *

For a single node:

(config) #

gms pxeBoot cluster <cluster-name> node <node-

name> ucsManagerIP <IP of UCS Manager> loginName <User

Name> loginPassword <User Password>

For example:

(config) #

gms pxeBoot cluster DN-CLUS node UCS-DN-1

ucsManagerIP 192.168.125.4 loginName Gurgaon\uttam.meena

loginPassword *

Note:

User ID used for loginName must have admin privilege on UCS

Manager for all the MURAL nodes.

The following sample may resemble the output:

Total number of nodes to be processed : 1

Total number of nodes processed :1 . . . . . . . .

. .

All nodes proccessed

Cluster : DN-CLUS

Node :

UCS-DN-1 Sucessfully

Pxebooted

(config) #

This command triggers blade reboot from network. Once the blade

starts booting from the network, GMS pushes the image on the blade

using PXE boot. Manufacture process can be started on each blade in

parallel.